LC-POWER Gaming 980B-SKYTOWER Bedienungsanleitung
User manual
Gaming 980B - SKYTOWER
Content
Chapter 1 Product introduction
1.1 Specification.....................................................................................03
1.2 Accessory..........................................................................................04
Chapter 2 Installation guide
2.1 Side panel assembly..............................................................................05
2.2 Motherboard installation......................................................................06
2.3 5,25” de ice installation........................................................................07
2.4 3,5” de ice installation.....................................................................08-09
2.5 2,5” de ice installation..........................................................................10
2.6 PSU installation.....................................................................................11
2.7 Fan installation.................................................................................12-13
2.8 Water cooling installation................................................................13-14
2.9 Front panel control & I/O installation..............................................14-16
Thank you for purchasing the “Gaming 980B - SKYTOWER” case
from LC-Power. Please read this manual before usage.
Specifications may be subject to change without prior notice.
Chapter 1 roduct introduction
1.1 Specification
Dimension 238（w）x 545（h）x 573（d）mm
Material Steel (SECC)
Front & top panel：ABS + meshed designed
5,25” dri e bay 4 external
3,5” dri e bay 6 internal – HDD cage with hot swap feature
2,5” dri e bay 3 internal
PCI slot 9
I/O Panel 2x USB 3.0, 4x USB 2.0, 1x Audio, 1x Mic
Control Panel Power switch, Reset switch, Power LED, HDD LED
Cans fans mounting
options
Front: 2x 120 mm (included in deli ery)
Back: 1x 120 mm (included in deli ery)
or 1x 140 mm
Top：3x 120 mm
Bottom: 2x 120 mm
Water cooling: support up to 360 mm radiator on
top and up to 240 mm radiator on bottom
Motherboard E-ATX / ATX / Micro-ATX / Mini-ITX
Power Supply ATX standard
Compatibility Graphic card up to 340 mm
CPU cooler up to 190 mm
1.2 Accessory
Accessory box contents: 1x user manual, 1x screw bag
Standoff Screw Screw Screw
5H-6#*4- 6#*6.5HCu M3*5 6*5KM 3*8*8PWA
10PCS 20PCS 24PCS 4PCS
Plastic hand screws Screw Cable tie Cable tie
6#-32 6#6HW-TC L=120mm L=150mm
10PCS 4PCS 3PCS 3PCS
Plastic standoff
3PCS
Chapter 2 Installation guide
2.1 Side panel assembly
1. Remo e the side panel:
Remo e the screws on the back of the chassis and open the side panel.
2. Reattach the side panel:
Align the side panel with hook holes to close the side panel.
Fix it with screws.
2.2 Motherboard installation
1. Screw the standoffs on the holes for the motherboard installation bracket.
2. Install the motherboard in a proper location and fix it with the pro ided
screws.
Note: CPU, RAM and any peripheral installation steps are not included in this manual.
Please refer to your motherboard manual for related mounting instructions .
2.3 5,25” de ice installation
1. Remo e the 5,25” dri e co er from the chassis by pushing it inside out. Now
put the 5,25” ODD into the dri e bay.
2. Fix the 5,25” ODD with the quick release screws on the side.
2.4 3,5” de ice installation
1. Open the side panel with the help of the latch.
2. Push the latch of the dri e bay and take out the 3,5” dri e bay tray.
3. Place an HDD into the dri e bay tray and secure it on the bottom of the tray
with the pro ided screws. Re erse the abo e mentioned steps to place the
HDD tray in the de ice cage.
4. Connect the backplane with a 4 pin Molex/PATA connector of the power
supply.
Connect the backplane to the motherboard with the help of SATA cables.
Note: The user may choose the direction of the 3,5” dri e cage. This
will help the user to arrange the chassis placement flexibly. Please
refer to the pictures below for the further information.
2.5 2,5” de ice installation
Gaming 980B pro ides three positions for the 2,5” HDD/SSD installation.
Two HDDs/SSDs on the side of the 5,25” dri e cage and one HDD/SSD under the
3,5” HDD cage location.
1. Open the side panel with the help of the latch.
2. Place the 2,5” HDD/SSD in a proper location as shown below and fix it with
the pro ided screws.
3. For the third position, release the screw on top of the 3,5” HDD cage and
remo e it. Put the 2,5” HDD/SSD on the bottom side of the bracket as shown
below and secure the HDD/SSD with the pro ided screws.
Inhaltsverzeichnis
Andere LC-POWER Computerzubehör Handbücher
