LeapFrog Bolt PRO Bedienungsanleitung

Title

Maintenance Schedule

Models

Bolt PRO

Document

Maintenance Manual

Version

1.5

Revision date

03-08-2018

Expected duration

Description

To maintain your Leapfrog Bolt PRO correctly and keep it running smoothly we recommend the

following maintenance work periodically.

Before doing any maintenance activity make sure the machine is completely turned off using the switch

on the back of the machine. Ensure the machine is completely cooled down by waiting 30 minutes after

the last use.

Remember to use protective gloves, glasses, and clothing for each of these activities.

Main body Cleaning and Inspection

Clean machine interior and surroundings.

Before each print.

Clean the motherboard and power supply unit

with compressed air.

Every 500 working hours.



HEPA Filter

Install the HEPA carbon filter in the machine.

Before each print.

Store the HEPA carbon filter in an airtight box.

After each print.

Replace the HEPA carbon filter.

Every 6 months.

Lubricating moving components

Ensure X, Y, and Z axes are clean from

material remains and dust.

Before each print.

Lubricate X-axis Shafts using sewing

machine oil.

Every 500 working hours.

Lubricate Y-axis Rails using HIWIN G05

Grease.

Every 500 working hours.

Lubricate Z-axis Spindles using Magnalube

PTFE.

Every 500 working hours.



Belts Tensioning and Inspection

Inspect the tension on X-axis belts (L+R).

Every 700 working hours.

Inspect the tension on Y-axis belts (L+R).

Every 700 working hours.

Inspect the tension on Z-axis Belt (Spindle).

Every 700 working hours.

Inspect the tension on Z-axis Belt (Motor).

Every 700 working hours.

Belts should be tight enough to minimize slack, but not so tight that they start placing a

lot of stress on the motor shaft or pulleys.

Bed

Clean the bed.

Before each print.

Calibrate bed.

Every 200 working hours.



Printhead

Check both axial fans are working.

Every 200 working hours.

Remove any material debris on the extruder

including the nozzle.

Before each print.

Inspecte the hot-end thumbscrew is properly

tightened.

Every 100 working hours.

Filament pressure thumbscrew.

Always adjust accordingly before inserting new

filament.

Clean Extruder Drive Gear.

Every 400 working hours.

Wiper

Remove any material debris from the wiper

blade.

Before each print.

Calibrate the wiper blades.

Every 100 working hours or when changing the

hot end.

The wiper blade should be as close to the (clean) nozzle as possible without touching it.

Andere Handbücher für Bolt PRO

Andere LeapFrog 3D-Drucker Handbücher

LeapFrog

LeapFrog Creatr HS Bedienungsanleitung

LeapFrog

LeapFrog Creatr HS Bedienungsanleitung

LeapFrog

LeapFrog BOLT Bedienungsanleitung

LeapFrog

LeapFrog Xeed Bedienungsanleitung

LeapFrog

LeapFrog Bolt PRO Bedienungsanleitung

LeapFrog

LeapFrog BOLT Bedienungsanleitung

LeapFrog

LeapFrog Xeed Bedienungsanleitung

LeapFrog

LeapFrog Creatr HS Bedienungsanleitung

LeapFrog

LeapFrog Creatr HS Bedienungsanleitung

LeapFrog

LeapFrog BOLT Bedienungsanleitung

LeapFrog

LeapFrog 3d printer Bedienungsanleitung

Beliebte 3D-Drucker Handbücher anderer Marken

Ultimaker

Ultimaker S5 Material Station Bedienungsanleitung

EcubMaker

EcubMaker TOYDIY Bedienungsanleitung

AnyCubic

AnyCubic Kossel Plus Bedienungsanleitung

ReDeTec

ReDeTec ProtoCycler Bedienungsanleitung

Kywoo3D

Kywoo3D Tycoon IDEX Bedienungsanleitung

CraftBot

CraftBot PLUS PRO Bedienungsanleitung

3DGence

3DGence INDUSTRY F340 Bedienungsanleitung

HP Jet Fusion 4200 Betriebsanleitung

Rokit

Rokit AEP Series Bedienungsanleitung

AnkerMake

AnkerMake M5 Bedienungsanleitung

DIYElectronics

DIYElectronics PRUSA I3 Montageanleitung

Ackuretta

Ackuretta FreeShape 120 Bedienungsanleitung

LONGER

LONGER LK5Pro Bedienungsanleitung

Stratasys

Stratasys J850 Bedienungsanleitung

MakerBot

MakerBot Replicator Bedienungsanleitung

Stratasys

Stratasys FDM Vantage Series Bedienungsanleitung

ZYYX

ZYYX Pro II Bedienungsanleitung

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Benutzerhandbuch