Lec+ PE 507 Bedienungsanleitung

PE 507

PG 507

Operating Instructions

refrigerators

GB/IE

The refrigerator was developed taking the different storage requirements of Pharmacy

products into consideration. Some must be stored cold - others require a little higher

temperature. A few must be stored separately. To ensure that you get the best out

of your new refrigerator, it is important that you become familiar with the refrigerator

functions and know how to use the accessories. Please read the instructions for use

carefully before setting up and using your refrigerator.

As these instructions apply to several refrigerator models, the equipment may vary

from model to model.

Before using the refrigerator

On receipt, check to ensure that the refrigerator has not become damaged during

transportation. Any transport damage should be reported to our Customer Services

department immediately.

Before lling the refrigerator with contents / products, the refrigerator interior should

be cleaned with lukewarm water containing a mild detergent. Use a soft cloth. If the

refrigerator has been stored in cold surroundings (colder than +5°C), it must be allowed

to stabilise for at least 2 hours before being switched on.

The refrigerator you have bought represents a new line of our products. It is charac-

terized by modern functional solutions, soft lines and subtle design.

Please, read the following description. It will let you fully appreciate the advantages of

the new line of our refrigerators and see for yourself that it is a good buy.

The following innovative technological solutions constitute the highest quality of our

products:

● fully environment-friendly appliance -the coolant, the construction materials as

well as our production technology do not yield any pollutants,

● sturdy door will hold a load of products arranged on capacious door shelves,

● solid insulation of our refrigerators ensures high efciency and low energy con-

sumption,

● self-defrosting fridge compartment limits cleaning to a periodical wash of the

compartment,

● ergonomic door handles, big and modern-shaped, with no sharp edges, make

opening the door easy,

● optimally situated lighting ensures perfect illumination of the whole compartment

and prevents from dazzling the user.

Content

Disposal ........................................................................................ 3

Safety Measures ...................................................................................... 4

Product Characteristics ......................................................................... 4

Before You Start ...................................................................................... 6

Operation.................................................................................................. 8

Maintenance and Service ....................................................................... 11

Switching the Door Mounting ................................................................ 13

Spare parts ................................................................................... 14

GB/IE

Warning

Changes in internal and external appearance of a product, not affecting its functionality

and safety, (e.g. shape of a door handle) are acceptable.

Disposing of the device

When disposing of the device, do not take it to regular municipal waste

containers. Instead, take it to electrical and electronic waste recyc¬ling

and reuse center. A relevant label has been put on the device, its in-

structions manual, or on the package.

The device has been manufactured of recyclable materials. By bringing

old device to recycling collection center, you show that you care about

nature.

Ask your local environmental care authority for information on location of

such facilities.

Safety Measures

The producer is not responsible for any damage resultant from violating the

principles in the manual. Thus, read carefully the information on safety measu-

res, operation, and maintenance of the refrigerator.

● Please keep the Manual for future use or for handing it over to the next user.

Before you turn the refrigerator on.

● When placing, moving or lifting the refrigerator, do not hold the door handle, do not pull

the condenser at the back of the refrigerator, and do not touch the compressor unit.

● Do not use it in cellars, vestibules, or in summerhouses not heated in autumn and

winter.

● After placing the refrigerator, wait two hours before you turn it on, for it could have

been excessively tilted in transport.

● Make sure children do not use the appliance unattended. Do not allow children to

play with the appliance. Children are not allowed to swing on the doors.

● Crackling sounds that may be heard are caused by expanding and shrinking of parts

caused by temperature changes.

● Before any maintenance activity, pull the plug out, do not pull the cord but hold the

plug rmly

● Do not use double-wire extension cords; if an extension cord is necessary, make

sure it is a cord with protection safety certicate.

● If the main power supply cord is damaged, it should be replaced by a serviceman.

● Because of safety reasons, do not repair the appliance by yourself. Repairs carried out

by persons without proper qualications can cause serious risk of injury for the user.

● Defrosted products, even only partially, should not be frozen again.

● If the appliance is not to be used any more, make it completely safe prior to scrap-

ping by cutting the cord.

GB/IE

Fig.1

● Keep the packaging material (bags,

Styrofoam pieces, etc.) out of reach of

children.

● Should the refrigerating unit be da-

maged, air the room for a few minutes

(the room should have at least 4 cubic

meters).

● The refrigerating agent can cause eye

injury.

● The refrigerator should not be trans-

ported, moved, or placed in horizontal

position and tilted more than 40ˇ. Should

such a situation occur, after placing the

appliance in the right position wait at least

2 hours before turning it on.

GB/IE

Product Characteristics

The refrigerator is designed for Pharmacy

use. The refrigerator chamber should not

be used for storage of foodstuffs.

The refrigerators are designed for

operation in the ambient temperature

from +16°C to +32°C.

The elements of the cooling system in the

appliance are located behind the back

wall of the chamber in order to maximize

the capacity of the chamber, facilitate

keeping the chamber clean and increase

durability of the product (protecting from

potential damage).

Accessories PE 507, PG 507

Wire shelf 2 pieces

wire storage container 1 piece

Technical PE 507, PG 507

parameters:

Height 865 mm

Width 558 mm

Depth 600 mm

Net capacity: 137 l

Weight 34 kg

Power supply 230 V ~50 Hz

Rated current 0,30A

Defrosting automatic

Please nd on the product nameplate the interval of ambient temperature for which

this product is designed to have the best performances

Class Symbol Ambient Temperature

Range °C

Extended

Temperate SN + 100C to + 320C

Temperate N + 160C to + 320C

Subtropical ST +180C to + 380C

PE 507 PG 507

Installation and removal of shelves:

GB/IE

Placement of the product

● Unpack the product; remove the tape securing the door and the accessories. Re-

move the remains of the glue, if any, with delicate cleaning detergent.

● Do not throw the Styrofoam element of the packaging away. Should you have to

transport the product again, secure the refrigerator with the Styrofoam elements, the

plastic foil, and Scotch tape.

● Wash the inside of the refrigerator chamber and the accessories with lukewarm

water with some dishwasher liquid and then wipe it and dry.

● Place the refrigerator in a dry, ventilated place, out of sun, far from heat sources

such as central heating radiators, etc.

- at least 30 cm from oil or coal-red stoves.

●If you place the refrigerator next to another refrigerating or freezing unit, the lateral

distance between the appliances should be at least 2 cm.

●Make sure the product is placed level ad ju sting two turn-in front feet of the re fri ge ra tor.

● Once placed, make sure the refrigerator is not standing on the power supply cord.

Before You Start

The PE 507, PG 507 refrigerator is equipped with a cover top and is designed to t

under a standard 865 mm high counter or bench top.

● For easy opening of the refrigerator door the distance between the side (the hinges

side) and the room wall (or similar) should be at least 5 cm.

●In order to remove a shelf hold the right

side of the shelf, lift the left side with your

left hand about 45° and remove the shelf

(Photo 2).

● Start taking out the shelf for cleaning

with the top one, start putting them back

in with the bottom one.

● Shelves are installed as follows:

- put the shelf in at an angle about 45°

(just like taking it out)

- align the projections with the grooves

located at the sides of the refrigerator

chamber.

GB/IE

Connection to the power supply system

If the xed power supply cable is damaged, it should be replaced by the manufacturer

or at an authorized servicing outlet, or by a qualied person to avoid danger.

Electrical connection

The appliance is intended for connection to alternating current. The connection values

for voltage (V) and frequency (Hz) are given on the nameplate in the cabinet.

Power must be connected via a wall socket with switch. The wall socket should be

easily accessible.

All earthed requirements stipulated by the local electricity authority must be observed.

The cabinet plug and wall socket should then give correct earthed. If in doubt, contact

your local supplier or an authorized electrician.

WARNING – This appliance must be earthed

The exible cord (mains lead) tted to this appliance has three cores for use with a

3-pin 13-amp or 3-pin 15-amp plug. If a BS 1363 (13-amp) fused plug is used, it should

be tted with a 13-amp fuse.

● Any modication of the refrigerating

system is prohibited. Be especially careful

not to do any damage to the capillary tube

(Photo 3 (1)) located in the recess next

to the compressors. The tube cannot be

bent, straightened or coiled. Damage of

the capillary tube by the user waives the

guarantee of the refrigerator.

▐

▼

Note:

First connection to the mains.

The appliance provides information about the higher

temperature (Hi alarm ) till the moment of cooling.

The alarm is signalised by a sound signal and “Hi"

caption on the display.

To cancel the alarm, press any push button.

Until the moment of cooling, the alarm is repeated

every 15 minutes.

Such an operating mode is normal until the required

temperature settings are reached.

Operation

1. User interface (Photo 4)

Button (1) ‘ I ’ (ON /OFF) – pressed for about 2-3sec – switches on and switches off

whole product's controlling,

Button (2) ‘light’ – turns on and off the lighting, if it is not turned off, it turns off auto-

matically after 3 minutes.

Green LED diode (3) – indicates lighting turned on,

Button (4) ‘lock’ – pressed for about 2-3sec – blocks the keypad – does not refer to

button (1) driver switch off,

Green LED diode (5) – indicates active blockade function,

‘-‘ minus diode (6) – indication of temperatures below zero,

LED display (7) –temperatures, service parameters and alarm symbols display,

Button (8) ‘▼’ - minimum temperature preview or parameter value decrease,

Button (9) ‘▲’ – maximum temperature preview or parameter value increase,

Button (10) AUX – functional button,

Green LED diode (11) – indication of temperature programming mode – manual

switch of AUX output,

2. First start up

After switching on, the driver activates the auto-test procedure. During the rst se-

cond, it displays dots, program version during next second, dots during the third

second and then switches to a normal work mode.

During the normal work mode, the display shows the temperature of a cooler. In case

of alarm, it displays E with an alarm number.

If the door is open, a „dr” symbol appears on the display (version with the option of

a door sensor).

If the driver is switched off, LED diodes are turned off and the display shows two

horizontal lines.

The display indicates temperature of the cooler within the range of –30oC to +30oC

GB/IE

3. SET UP

3.1 Deleting recorded exceedance (MIN / MAX):

- pressing buttons (8)‘▼’ and (9)‘▲’ for about 2-3sec results in deleting saved min/

max temperatures and saving current temperature in the driver’s memory

4. Defrostation

Defrostation is turned on automatically every 8 hours (C0 parameter). Maximum

length of defrostation is 30 minutes (C1 parameter).

Cooler compressor is turned off during defrostation.

Defrostation is nished also when the temperature of the evaporator is higher than

+4oC.

If the evaporator temperature sensor is damaged, temperature-conditioned defrosta-

tion completion will not occur.

Defrostation occurs also when the cooler sensor is damaged and the compressor

works using emergency mode in the c6/c7 time cycle.

5. ALARM CONDITION / REMOTE ALARM

On PE 507 and PG 507 models the cabinet alarm can be connected to a remote

control station via two 4mm jack-plugs on the rear of the control panel.

Note! The power source for this circuit must be external to the cabinet and MUST

NOT EXCEED 50 V AC/DC. This must be installed by a competent electrician.

In normal conditions (no alarm) the AUX relay OPENS the contact for the remote

alarm facility.

When there is alarm condition (Hi/Lo temperature, E1, E2, probe failure), the AUX

relay CLOSES the contact.

In alarm condition (excluding power failure), pressing any button for 1 second causes

the alarm display to be cancelled, the buzzer to be muted and the AUX relay to open

the contact.

After the alarm has been silenced, if the alarm ends , all indications are erased.

6. Alarms

A displayed alarm should be saved even if the cause of the alarm does not exist any-

more (except the open door alarm).

Alarms are not saved after switching off (lack) of power.

E1 – cooler sensor malfunction – if the reason of the alarm still exists, it can not be

deleted,

E2 – evaporator sensor malfunction – if the reason of the alarm still exists, it can not

be deleted.

GB/IE

Hi – maximum set temperature of the product exceeded by a difference set in d6

parameter by 15 minutes’ alarm delay time (c8).

Lo – minimum set temperature of the product exceeded by a difference set in d7

parameter by 15 minutes’ alarm delay time (c8).

dr – open door alarm - after 3 minutes as a sound alarm – displayed symbol disap-

pears after closing the door.

Pressing a random button deletes the sound signal as well as Hi and Lo indications.

E1,E2 deletion by means of turning off the on/off driver after prior elimination of a

malfunction.

Defrosting the refrigeration chamber

Storage of produce in the refrigerator

●Produce can be placed in boxes, bottles or other containers. Place it evenly on the

shelves. Make sure the contents are not touching the back wall, it could lead to frosting

or wetting of the products.

● Do not put any containers with hot contents into the refrigerator.

Frost settles on the back wall of the

refrigeration chamber. It is automatically

removed. During the defrosting, the con-

densate can contain some impurities that

could clog up the opening in the through.

Should it occur, delicately unclog the ope-

ning with the cleaning plug. (Photo 5).

The appliance operates in cycles: it

refrigerates (frost sets on the back wall

during the phase) and defrosts (water

ows down the back wall).

● Turn off the main switch (Photo 4(1)).

Unplug the mains cord.

● The whole appliance except the door

gasket can be cleaned with mild cleaning

detergent. The door gasket should be

cleaned with water only and wiped dry.

Detergents containing abrasives or acids

are not suitable for the cleaning.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Lec+ Kühlschrank Handbücher

Lec+

Lec+ TF55207W Bedienungsanleitung

Lec+

Lec+ R5511W Bedienungsanleitung

Lec+

Lec+ T5576W Bedienungsanleitung

Lec+

Lec+ L50262W Bedienungsanleitung

Lec+

Lec+ INT7030FF Bedienungsanleitung

Lec+

Lec+ T50084W Bedienungsanleitung

Lec+

Lec+ CL 157 Bedienungsanleitung

Lec+

Lec+ R5006W Bedienungsanleitung

Lec+

Lec+ TU55142W Bedienungsanleitung

Lec+

Lec+ IST 47 Bedienungsanleitung

Lec+

Lec+ IT6029R Bedienungsanleitung

Lec+

Lec+ R5010W Bedienungsanleitung

Lec+

Lec+ TL55142W Bedienungsanleitung

Lec+

Lec+ TS50152W Bedienungsanleitung

Lec+

Lec+ TF55185W Bedienungsanleitung

Lec+

Lec+ L5511W Bedienungsanleitung

Lec+

Lec+ TF50152W Bedienungsanleitung

Lec+

Lec+ T50082W Bedienungsanleitung

Lec+

Lec+ TL55142W Bedienungsanleitung

Lec+

Lec+ PE 907 Bedienungsanleitung

Lec+

Lec+ TL5510W Bedienungsanleitung

Lec+

Lec+ R50263W Bedienungsanleitung

Lec+

Lec+ TS55184W Bedienungsanleitung

Lec+

Lec+ TNF55187W Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung