LED Group ROBUS R2WLEDNMEAU-01 Bedienungsanleitung

Specication:

Issue 1 130913

2W LED NON MAINTAINED

RECESSED EMERGENCY LIGHT

R2WLEDNMEAU-01

Please read instruction before commencing installation and

retain for future reference.

Model No. R2WLEDNMEAU-01

Supply Voltage: 220-240V~50/60Hz

Power Consumption : 2W

Lumen Output : 190lm

Colour Temperature:

6000-7000K

CRI: 75

Beam angle : 120o

Operating temp Range :

0°C ~ +40°C

Battery 3.6V/3.0Ah Ni-Cd

Discharge Duration >3 hours after minimum 24Hr charge

Safety Classification:

Class I, Must be earthed

IP Rating: 20

Overall Diameter: 130mm

Depth: 65mm

Weight: 0.7Kg

Warranty: 2 year

Installation:

Recessed

Suitable for mounting on a normally flammable surface

Complete with flex and plug

Complies with EN60598-1;EN60598-2-22;EN55015;EN61000-3-2;

EN61000-3-3;EN61547

ISO 9001:2008

Q UAL IT Y ASSU RE DCO MPAN Y

Dimensions:

Information for the Product user

1. Please note the requirement to dispose of Waste Electrical & Electronic Equipment separately from household waste

(WEEE marked with crossed out wheelie bin symbol).

2. Please consider your role in contributing to re-use and recycling by returning this product at end of life to a collection

centre for waste electrical equipment or a Civic Amenity site, or to a retail outlet from which you are purchasing a

replacement.

3. This equipment may contain substances that are hazardous to health and the environment if disposed of carelessly.

It is important that it is separated from normal household waste and recycled in the WEEE chain

4. The “crossed out wheelie bin symbol” on a product indicates this equipment must not be disposed of in normal household

waste, but should be disposed of according to local WEEE regulations

The Installation must be carried out by an electrician

LED Group

Western Retail Park Tel: +353 1 7099000

Nangor Road Fax: +353 1 7099060

Dublin 12 Email: [email protected]

Ireland Website: www.led.ie

Page 1

Ø85mm

Cutout 75mm

Ø130mm

Cutout 75-110mm

65mm

Battery 3.6V3.0Ah

2W Energency LED

ISO 9001:2008

Q UAL IT Y ASSU RE DCO MPAN Y

The Installation must be carried out by an electrician

Testing:

Installation and Maintenance Record:

LED Group

Western Retail Park Tel: +353 1 7099000

Nangor Road Fax: +353 1 7099060

Dublin 12 Email: [email protected]

Ireland Website: www.led.ie

Page 2

The emergency lighting must be inspected and tested regularly in accordance

with local codes of practice: note: for safety reasons tests should be carried

out during daylight hours.

The minimum recommended test schedule is as follows:

After installation, allow 24 hours to ensure full battery charge and then

interrupt the supply; check after 3 hours that LED is still lighting.

1. Daily check that charge indicator led is working

2. Monthly, interrupt mains for a short period and check LED lights

3. Six-monthly, check 1 hour duration

4.At the end of year 3 and subsequently every year, check 3 hour duration:

batteries must be replaced when they can no longer support 3 hour operation.

5. Complete record sheet on installation and retain in maintenance file.

6. Update file with ongoing test records for inspection by fire officer or

Installer

Installation Type

Installation test duration & Date

Signed

Month Test

Short

1Hr.

3Hr.

Short

Date

xxxxx xxxxx xxxxx xxxxx

xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx

1st Year

Signed Date Signed Date Signed Date Signed Date

2st Year 3st Year 4st Year 5st Year

! Electrical products can cause death or injury, or damage to property. If in any

doubt about the installation or use of this product, consult a competent

ISO 9001:2008

Q UAL IT Y ASSU RE DCO MPAN Y

The Installation must be carried out by an electrician

LED Group

Western Retail Park Tel: +353 1 7099000

Nangor Road Fax: +353 1 7099060

Dublin 12 Email: [email protected]

Ireland Website: www.led.ie

Page 3

Installation:

1. Ensure mains supply is switched off before commencing work

2. Before cutting, ensure that the hole does not impinge on joists, pipe work,

cables or other building services

Fig 2. Connect the plug with the power supply

Fig 1. This luminaire requires a round hole

Ø75-110mm to be cut into the ceiling for

correct installation.

Fig 3. Offer the luminaire up to cut-out with the springs

being held vertically.

Put the driver and battery on the top of insulation.

Cutout Ø75-110mm with

the white strim

no use the white strim

use the white strim

Battery 3.6V3.0Ah

2W Energency LED

Fig 4.Manual Test Switch: When power is connected the green

LED should come on indicating correct battery charge has

started. When manual test switch is pressed the emergency

lamp will come on and the green LED will turn off

Information for the Product user

1. Please note the requirement to dispose of Waste Electrical & Electronic Equipment separately from household waste (WEEE

marked with crossed out wheelie bin symbol).

2. Please consider your role in contributing to re-use and recycling by returning this product at end of life to a collection centre for

waste electrical equipment or a Civic Amenity site, or to a retail outlet from which you are purchasing a replacement.

3. This equipment may contain substances that are hazardous to health and the environment if disposed of carelessly. It is important

that it is separated from normal household waste and recycled in the WEEE chain

4. The “crossed out wheelie bin symbol” on a product indicates this equipment must not be disposed of in normal household waste,

but should be disposed of according to local WEEE regulations

Andere LED Group Beleuchtungsausrüstung Handbücher

LED Group

LED Group ROBUS TWILIGHT RTW0330SQ-24 Bedienungsanleitung

LED Group

LED Group ROBUS RTW0330C-24 Bedienungsanleitung

LED Group

LED Group ROBUS ROBIN RFS10165GZ-01 Bedienungsanleitung

LED Group

LED Group Robus R8EM Bedienungsanleitung

LED Group

LED Group Robus RLU18X0S-01 Bedienungsanleitung

LED Group

LED Group ROBUS RKN12050DP-01 Bedienungsanleitung

LED Group

LED Group ROBUS RVE01440DME-01 Bedienungsanleitung

LED Group

LED Group Robus R112LEDCP-01 Bedienungsanleitung

LED Group

LED Group ROBUS R3011LED240CW-13 Bedienungsanleitung

LED Group

LED Group ROBUS TWILIGHT RTW0330RG-24 Bedienungsanleitung

LED Group

LED Group ROBUS R8EMLED Bedienungsanleitung

LED Group

LED Group Robus RVUF122FT-24 Bedienungsanleitung

LED Group

LED Group ROBUS TWILIGHT RTW0130SQ-24 Bedienungsanleitung

LED Group

LED Group Robus RTK1240-01 Bedienungsanleitung

LED Group

LED Group ROBUS RAML7P53038-25 Bedienungsanleitung

LED Group

LED Group ROBUS SPENCER RSN0640-24 Bedienungsanleitung

LED Group

LED Group Robus R8MTS Bedienungsanleitung

LED Group

LED Group ROBUS R8MU Bedienungsanleitung

LED Group

LED Group ROBUS SPACEMAN R405MK-WW Bedienungsanleitung

LED Group

LED Group Robus RVB007RGB10I65 Bedienungsanleitung

LED Group

LED Group ROBUS R18230DL-01 Bedienungsanleitung

LED Group

LED Group ROBUS RZE940-24 Bedienungsanleitung

LED Group

LED Group ROBUS TWILIGHT RTW0230C-24 Bedienungsanleitung

LED Group

LED Group ROBUS LSTR6W Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung