Ledj Artisan 2000 Bedienungsanleitung

Order code: LEDJ333

Artisan 2000

RGBWA Fresnel

User Manual

www.prolight.co.uk Artisan 2000 RGBWA Fresnel User Manual 2

Safety advice

WARNING

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL

CAREFULLY BEFORE YOUR INITIAL START-UP!

• Before your initial start-up, please make sure that there is no damage caused during transportation.

• Should there be any damage, consult your dealer and do not use the equipment.

• To maintain the equipment in good working condition and to ensure safe operation, it is necessary

for the user to follow the safety instructions and warning notes written in this manual.

• Please note that damages caused by user modications to this equipment are not subject to warranty.

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-observance

of this manual or any unauthorised modication to the equipment.

OPERATING DETERMINATIONS

If this equipment is operated in any other way, than those described in this manual, the product may suffer damage and

the warranty becomes void. Incorrect operation may lead to danger e.g: short-circuit, burns and electric shocks etc.

Do not endanger your own safety and the safety of others!

Incorrect installation or use can cause serious damage to people and/or property.

CAUTION!

KEEP THIS EQUIPMENT

AWAY FROM RAIN,

MOISTURE AND LIQUIDS

CAUTION!

TAKE CARE USING

THIS EQUIPMENT!

HIGH VOLTAGE-RISK

OF ELECTRIC SHOCK!!

• Never let the power cable come into contact with other

cables. Handle the power cable and all mains voltage

connections with particular caution!

• Never remove warning or informative labels from the unit.

• Do not open the equipment and do not modify the unit.

• Do not connect this equipment to a dimmer pack.

• Do not switch the equipment on and off in short intervals,

as this will reduce the system’s life.

• Only use the equipment indoors.

• Do not expose to ammable sources, liquids or gases.

• Always disconnect the power from the mains when

equipment is not in use or before cleaning! Only handle

the power-cable by the plug. Never pull out the plug by

pulling the power-cable.

• Make sure that the available mains supply voltage is

between 100~240V AC, 50/60Hz.

• Make sure that the power cable is never crimped or

damaged. Check the equipment and the power cable

periodically.

• If the equipment is dropped or damaged, disconnect the

mains power supply immediately and have a qualied

engineer inspect the equipment before operating again.

• If the equipment has been exposed to drastic

temperature uctuation (e.g. after transportation),

do not connect power or switch it on immediately.

The arising condensation might damage the equipment.

Leave the equipment switched off until it has reached

room temperature.

• If your product fails to function correctly, stop use

immediately. Pack the unit securely (preferably in the

original packing material), and return it to your Pro Light

dealer for service.

• Only use fuses of same type and rating.

• Repairs, servicing and power connection must only be

carried out by a qualied technician. THIS UNIT CONTAINS

NO USER SERVICEABLE PARTS.

• This lighting xture is for professional use only - it is

not designed for or suitable for household use. The

product must be installed by a qualied technician in

accordance with local territory regulations. The safety of

the installation is the responsibility of the installer. The

xture presents risks of severe injury or death due to re

hazards, electric shock and falls.

• Warning! Risk Group 2 LED product according to

EN 62471. Do not view the light output with optical

instruments or any device that may concentrate the beam.

• WARRANTY: One year from date of purchase.

www.prolight.co.uk Artisan 2000 RGBWA Fresnel User Manual 3

Product overview & technical specications

The Artisan 2000 RGBWA Fresnel is ideal for schools, churches and stages and

makes an ideal replacement for tungsten xtures. Control of the unit is facilitated via

a 4 button menu and LCD display, whilst the beam angle can be manually adjusted.

A handy IR remote control is included and an optional W-DMX Compatible Transceiver

can be added into the back panel.

Artisan 2000 RGBWA Fresnel

• 1 x 200W ve-colour COB LED (RGBWA)

• Manually adjustable beam angle: 20°- 50°

• 20° - 9,498 Lux @ 2m (full on),

50° - 2,680 Lux @ 2m (full on)

• 2.8kHz refresh rate

• DMX channels: 5/6/7 or 9 selectable

• Artisan Series W-DMX USB compatibility for

wireless master/slave or DMX control

• 0-100% dimming and variable strobe

• 4 dimming curves: Linear, square law,

inverse square law and S-curve

• 4 push button menu with LCD display

• PowerCON input/output

• 5-Pin XLR input/output

• Temperature controlled fan for whisper quiet operation

• Handle on rear panel

• Filter frame and barn doors included

• Supplied with IR remote

Specications Artisan 2000 RGBWA Fresnel

Power consumption 210W

Power supply 100~240V, 50/60Hz

Fuse T3A 250V

Dimensions 365 x 300 x 482mm

Weight 6.1kg

Order code LEDJ333

0m 2m 3m 4m 5m1m

50°

20°

20° - Lux

FULL ON

50° - Lux

FULL ON

37992

6672

13684

2724

12136

5148

10720

2184

4404

916

3936

1720

9498

1668

3421

681

3034

1287

2680

546

1101

229

984

430

4221

740

1520

302

1348

572

1191

242

489

101

437

191

2374

417

855

170

758

321

670

136

275

57.2

246

107

1519

266

547

108

485

205

428

87.3

176

36.6

157

68.8

www.prolight.co.uk Artisan 2000 RGBWA Fresnel User Manual 4

40mm

220mm

482mm

190mm

167mm

195mm

300mm

150mm

167mm

187mm

365mm

Technical specications

www.prolight.co.uk Artisan 2000 RGBWA Fresnel User Manual 5

Technical specications

01 - Earth point

02 - LCD display

03 - Function buttons

04 - Colour frame release mechanism

05 - Zoom adjustment

06 - 5-Pin DMX input

07 - 5-Pin DMX output

08 - PowerCON input

09 - PowerCON output

10 - Fuse: T3A 250V

11 - Wireless DMX USB input

12 - Hanging bracket

13 - Hanging bracket adjustable knob

14 - Carry handle

15 - Barn doors

In the box: 1 x xture,

1 x barn doors,

1 x IR remote,

1 x power cable

& 1 x user manual

www.prolight.co.uk Artisan 2000 RGBWA Fresnel User Manual 6

Operating instructions

DMX MODE

ADDR:001

DMX

address

setting

DMX MODE

ADDR:001

DMX MODE

ADDR:512

DMX MODE

CHAN: 05

DMX MODE

CHAN: 06

DMX MODE

CHAN: 07

DMX MODE

CHAN: 09

Auto run mode

AUTO RUN

FAD+SNAP

AUTO RUN

SPEED:00

AUTO RUN

SPEED:99

Colour/macro mode

CLR MACS

COLOR: 00

CLR MACS

COLOR: 00

CLR MACS

COLOR: 26

CLR MACS

COLOR: 25

CLR MACS

COLOR: 44

CLR MACS

STROB:00

CLR MACS

STROB:99

CLR MACS

SPEED:00

CLR MACS

SPEED:99

Manual

dimming

mode

MANUAL

RED: 000

MANUAL

STROB: 00

MANUAL

STROB: 99

MANUAL

RED: 000

MANUAL

GREN: 000

MANUAL

BLUE: 000

MANUAL

WHIT: 000

MANUAL

AMBE: 000

MANUAL

RED: 255

MANUAL

GREN: 255

MANUAL

BLUE: 255

MANUAL

WHIT: 255

MANUAL

AMBE: 255

www.prolight.co.uk Artisan 2000 RGBWA Fresnel User Manual 7

Dimming mode setting

DIMMODE

HALOGEN

DIMMODE

LED

DMX fail setting

DMX FAIL

BLACKOUT

DMX FAIL

HOLD

DMX FAIL

STATIC

OTHER

IR: ON

Reset

factory

settings

Backlight

setting

OTHER

BLGT: ON

OTHER

BLGT:OFF

Wireless

DMX

setting

OTHER

WIFI: ON

OTHER

WIFI:OFF

IR setting

OTHER

IR : ON

OTHER

IR : OFF

OTHER

SYSRESET

Operating instructions

SLAVE MODE Slave mode

Dimming curve setting

DIMCURVE

LINEAR

DIMCURVE

SQUARE

DIMCURVE

I-SQUARE

DIMCURVE

S-CURVE

www.prolight.co.uk Artisan 2000 RGBWA Fresnel User Manual 8

DMX mode:

Operating in a DMX control mode environment gives the user the greatest exibility when it comes

to customising or creating a show. In this mode you will be able to control each individual trait of the

xture and each xture independently.

To access the DMX address mode, press the “MENU” button to show “DMX MODE ADDR” on the LCD

display. Now use the “UP” and “DOWN” buttons to set the required DMX address. Press the “ENTER”

button to show “DMX MODE CHAN” on the LCD display and use the “UP” and “DOWN” buttons to

select the required the DMX channel (5/6/7 or 9 selectable). Press the “ENTER” button to conrm

the setting. To exit out of any of the above options, press the “MENU” button.

Operating instructions

Channel Value Function

1 000-255 Red dimmer (0-100%)

2 000-255 Green dimmer (0-100%)

3 000-255 Blue dimmer (0-100%)

4 000-255 White dimmer (0-100%)

5 000-255 Amber dimmer (0-100%)

5 channel mode:

Channel Value Function

1 000-255 Red dimmer (0-100%)

2 000-255 Green dimmer (0-100%)

3 000-255 Blue dimmer (0-100%)

4 000-255 White dimmer (0-100%)

5 000-255 Amber dimmer (0-100%)

6 000-189 Master dimmer (0-100%)

190-250 Strobe (slow-fast)

251-255 Full on

6 channel mode:

Channel Value Function

1 000-255 Red dimmer (0-100%)

2 000-255 Green dimmer (0-100%)

3 000-255 Blue dimmer (0-100%)

4 000-255 White dimmer (0-100%)

5 000-255 Amber dimmer (0-100%)

6 000-255 Master dimmer (0-100%)

7 000-004 No function

005-255 Strobe (slow-fast)

7 channel mode:

www.prolight.co.uk Artisan 2000 RGBWA Fresnel User Manual 9

Operating instructions

Channel Value Function

1 000-255 Red dimmer (0-100%)

2 000-255 Green dimmer (0-100%)

3 000-255 Blue dimmer (0-100%)

4 000-255 White dimmer (0-100%)

5 000-255 Amber dimmer (0-100%)

6 000-255 Master dimmer (0-100%)

7 000-004 No function

005-255 Strobe (slow-fast)

8 000-005 Blackout

006-010 Red

011-015 Orange

016-020 Yellow

021-025 Green

026-030 Cyan

031-035 Blue

036-040 Pink

041-045 Magenta

046-050 Cool white

051-055 Warm white

056-060 Full on

061-065 Light pink

066-070 Light apricot

071-075 Light ochre

076-080 Grey pearl

081-085 Green pearl

9 channel mode:

Channel Value Function

8 (cont.) 086-090 Green veronese

091-095 Blue lagoon

096-100 Sky blue

101-105 Light blue

106-110 Cerulean blue

111-115 Fluo

116-120 Candy

121-155 Amber

156-160 Macro 1

161-165 Macro 2

166-170 Macro 3

171-175 Macro 4

176-180 Macro 5

181-185 Macro 6

186-190 Macro 7

191-195 Macro 8

196-200 Macro 9

201-205 Macro 10

206-210 Macro 11

211-215 Macro 12

216-220 Macro 13

221-255 Macro 14

9 000-255 No function

(when CH8 is between 000-155)

Speed (slow-fast)

(when CH8 is between 156-255)

Manual dimming mode:

To access the manual dimming mode press the “MENU” button until the display shows “MANUAL RED”

on the LCD display. Use the “UP” and “DOWN” buttons to select the required brightness of red from

“000” ~ “255”. Press the “ENTER” button and repeat for “GREN” (green), “BLUE” (blue), “WHIT” (white)

and “AMBE” (amber). Now press the “ENTER” button and then use the “UP” and “DOWN” buttons to

select the strobe speed from “00” ~ “99”. Press the “ENTER” button to conrm the setting.

Value: 000 - 255 (000 = LED off, 255 = high brightness)

Value: 00 - 99 (00 = no strobe, 99 = fast strobe speed)

To exit out of any of the above options, press the “MENU” button.

www.prolight.co.uk Artisan 2000 RGBWA Fresnel User Manual 10

Operating instructions

Colour/macro mode:

To access the colour mode, press “MENU” until the display shows “CLR MACS” on the LCD

display. Use the “UP” and “DOWN” buttons to select the required colour/macro speed from

“COLOR: 00” ~ “COLOR: 25”/“MACRO: 26” ~ “MACRO: 44”.

When a colour has been selected, press the “ENTER” button and then use the “UP” and “DOWN”

buttons to select the strobe speed from “00” ~ “99”. Press the “ENTER” button to conrm the setting.

When a macro has been selected, press the “ENTER” button and then use the “UP” and “DOWN”

buttons to select the speed from “00” ~ “99”. Press the “ENTER” button to conrm the setting.

Value: 00 - 99 (00 = no strobe, 99 = fast strobe speed)

Value: 00 - 99 (00 = slow speed, 99 = fast speed)

To exit out of any of the above options, press the “MENU” button.

Auto run mode:

To access the auto run mode, press “MENU” until the display shows “AUTO RUN” on the LCD

display. Use the “UP” and “DOWN” buttons to select the required speed from “00” ~ “99”.

Press the “ENTER” button to conrm the setting.

Value: 00 - 99 (00 = slow speed, 99 = fast speed)

To exit out of any of the above options, press the “MENU” button.

Master/slave mode:

To set the master unit, press the “MENU” button on the master unit to select either the manual mode,

colour/macro mode or auto run mode.

To set the other units in slave mode, press the “MENU” button on the slave unit to show “SLAVE MODE”.

Press the “ENTER” button to conrm the setting.

To exit out of any of the above options, press the “MENU” button.

Please ensure that all slave units are set to the same DMX channel mode as the master unit.

Dimming curves:

To access the xtures dimming curves, press the “MENU” button to show “DIMCURVE” on the LCD

display. Now use the “UP” and “DOWN” buttons on the rear of the unit to select between “LINEAR”,

“SQUARE”, “I-SQUARE” and “S-CURVE”. Press the “ENTER” button to conrm the setting.

To exit out of any of the above options, press the “MENU” button.

Dimming mode:

To access the xtures dimming mode, press the “MENU” button to show “DIMMODE” on the LCD display.

Now use the “UP” and “DOWN” buttons on the rear of the unit to select between “HALOGEN” and

“LED”. Press the “ENTER” button to conrm the setting.

To exit out of any of the above options, press the “MENU” button.

Inhaltsverzeichnis

Andere Ledj DJ-Equipment Handbücher

Ledj

Ledj Artisan 2000 Dual White Fresnel Bedienungsanleitung

Ledj

Ledj Event Spot RGBW MKII Bedienungsanleitung

Ledj

Ledj LEDJ235 Bedienungsanleitung

Ledj

Ledj Stage Par CZ 100 Bedienungsanleitung

Ledj

Ledj LEDJ232 Bedienungsanleitung

Ledj

Ledj Artisan 1200 WW Profile Bedienungsanleitung

Ledj

Ledj SPECTRA BATTEN 24T3 EXTERIOR Bedienungsanleitung

Ledj

Ledj Pixel Storm 12 HEX Batten Bedienungsanleitung

Ledj

Ledj Rubix RGB 3D Panel Bedienungsanleitung

Ledj

Ledj Spectra Par 15Q8 Bedienungsanleitung

Ledj

Ledj LEDJ195 Bedienungsanleitung

Ledj

Ledj Spectra Flood Q40 Bedienungsanleitung

Ledj

Ledj LEDJ331 Bedienungsanleitung

Ledj

Ledj Event Spot DL MKII Bedienungsanleitung

Ledj

Ledj Visio LP 600RGB Bedienungsanleitung

Ledj

Ledj Spectra Par 7Q8 Exterior Fixture Bedienungsanleitung

Ledj

Ledj TPix Strip & Controller MKII Series Bedienungsanleitung

Ledj

Ledj PRO LED Starcloths CW Series Bedienungsanleitung

Ledj

Ledj Spectra Par Q12B Bedienungsanleitung

Ledj

Ledj Pixel Storm 12 Quad Batten MKII Bedienungsanleitung

Ledj

Ledj LEDJ110 Bedienungsanleitung

Ledj

Ledj LEDJ187 Bedienungsanleitung

Ledj

Ledj Rapid QB1 Bedienungsanleitung

Ledj

Ledj Display Floor Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Zumtobel

Zumtobel APHRODITE Home Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung