LEDYi Lighting RT1 Bedienungsanleitung

Page 1Mechanical Structures and InstallationsOperation● When turn on light, the indicator display blue. when turn off light, the indicator display red.● When touch the color wheel, the indicator will display the same color.● When press or touch operation is invalid (If the light is off), the indicator display red.● To extend battery life, no touch or press key operation after a few seconds, the touch wheel will enter sleep state, you need press any key to make touch wheel quit sleep state.Match Remote Control (two match ways)Use the controller’s Match key

Match: Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) of the remote.The LED indicator fast flash a few times means match is successful.

Use Power Restart Match: Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote)or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful..Delete: Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.Delete: Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted.End user can choose the suitable match/delete ways. Two options are offered for selection:RT1,RT6,RT8 Touch Wheel RF Remote Controller53.00 mm

122.00 mm

17.50 mmRT1RT6User Manual Ver 1.0.9Model No.: RT1/RT6/RT8Touch Wheel RF Remote ControllerLVDRED1 Zone Dimming4 Zone Dimming8 Zone DimmingRT8● Apply to single color LED controller.Ultra sensitive color adjustment touch wheel.● ● Each remote can match one or more receiver. ● AAAx2 b attery powered.● Operate with LED indicator light.● Magnet on the back which can be stuck on back holder.Technical ParametersFeatures1,4 ,8 zone dimming/Touch color wheel/Wireless remote 30m distance/AAAx2 battery/Magnet stuck ﬁx

53.50 mm

3VDC(AAAx2) BatteryBack holder with magnetTo x the remote, three options are offered for selection:Option 1: stuck the remote on any metal surfaces directly.Option 2: ﬁx the remote' back holder on the wall with two screws.Option 3: adhere the remote' back holder to the wall with paster.Warranty 5 years WarrantyOperation temperatureEnvironment IP20 IP rating

Ta: -30

C ~ +55

Input and OutputOutput signal RF 2.4GHz()Working voltage 3VDC AAAx2()Working current ＜5mA Standby current ＜10μAStandby time 1 yearRemote distance 30m(Barrier-free space)Weight48gGross weight Net weight88gSafety and EMCEMC standard (EMC)ETSI EN 301 489-1 V2.2.3ETSI EN 301 489-17 V3.2.4 Radio Equipment(RED)ETSI EN 300 328 V2.2.2CertificationCE,EMC,LVD,REDEN 62368-1:2020+A11:2020Safety standard(LVD)

Safety information1. Read all instructions carefully before you begin this installation.2. When installing battery, pay attention to the battery positive and negative polarity. A long time without the remote control, remove the battery. When remote distance becomes smaller and insensitive, replace the battery.3. If no response from the receiver, please re-match the remote. 4. Gently handle remote, beware of falling.5. For indoor and dry location use only.: Short press turn on/off all zone light. : Short press select and turn on zone light, long press 2s turn off zone light. Short press multiple zone key fastly, will select multiple zone synchronously. : Touch to change current zone brightness.: Short press recall the scene, long press 2s save current state into S1/2/3/4. the LED indicator display green when save OK. 8 zone recall or save synchronously. ● RT8 8 zone dimming remoteS1S2S3S41243S1S2S3S4124356875687Page 2RT1,RT6,RT8 Touch Wheel RF Remote Controller: Short press recall the scene, long press 2s save current brightness into S1/2/3/4. the LED indicator display green when save OK. : 25%, 50%, 75%,100% brightness. : Adjust brightness, short press 10 levels, long press 1-6s for continuous 256 levels adjustment.: Touch to change brightness.: Turn on/off light.: Small night brightness (10%).: Turn off light after 30s, long press 2s will turn off light after 60s.: Short press turn on/off all zone light. : Short press select and turn on zone light, long press 2s turn off zone light. Short press multiple zone key fastly, will select multiple zone synchronously. : Touch to change current zone brightness.: Short press recall the scene, long press 2s save current state into S1/2/3/4. the LED indicator display green when save OK. 4 zone recall or save synchronously.: 25%, 50%, 75%,100% brightness for current selected zone.● RT1 1 zone dimming remoteS1S2S3S430sS1S2S3S430s ● RT6 4 zone dimming remoteS1S2S3S41243S1S2S3S41243User Manual Ver 1.0.9Key functionThe remote can be used as 4 zone dimming remote or single zone 4 channel dimming remote.On/Off + 4: Long press 2s set as 4 channel dimming remote,only match with one or multiple receiver of 4 channel, such as V4 or C4 controller.On/Off + 1: Long press 2s set as 4 zone dimming remote,each zone match with one or multiple receivers.When set ok, the red indicator will light on longer.

Dieses Handbuch passt für folgende Modelle

Andere LEDYi Lighting Fernbedienung Handbücher