LEGRAND Pro 21 Bedienungsanleitung

Note:

One individual blind control operates a single motor.

Characteristics

LE00387AA

Voltage 100 - 240 VA

Frequency 50 - 60 Hz

2 x 1,5 mm2

or 1 x 2,5 mm2

Standard Power line carrier EN 50065

- IEC 60669-2-1

- 5° C to + 45° C

-5°C

110 VA

230 VA

1 x 270 VA

1 x 500 VA

Pro 21TM

PLC/IR individual blind control with

slat angling and Preset

7756 23

Safety instructions:

This product should be installed prefe-

rably by a qualified electrician.

Incorrect installation and use can

entail risk of electric shock or fire.

Before carrying out the installation, read

the instructions and take account of the

product's specific mounting location.

Do not open up the device. All Legrand

products must be exclusively opened and

repaired by personnel trained and appro-

ved by LEGRAND. Any unauthorised

opening or repair completely cancels all

liabilities and the rights to replacement

and guarantees.

Only use genuine accessories..

Wiring

Characteristics (continued)

L> 50 mm

L= 40 mm

L< 40 mm

Control

buttons

LEARN button

Preset button

LEARN indicator light

Description Factory settings

When first powered up, pressing

the buttons controls all the

opening points (roller shutter or blind) in

the “In One by Legrand” installation.

This option lets you check the correct

operation and connection of all the

blinds.

Pressing the Learn(1) button twice cancels

this general control function.

(1) Programming or learning button.

Operation

Blind

Open

Stop

STOP

<1 s

>1 s

Operation (continued)

Slat angling

Open

Operation (continued)

1 - Calibration procedure:

a -

b - and

10 s

The product has learnt the length of the blind it controls; now it can learn an opening level (PRESET mode).

Operation (continued)

2 - Function: "End-stop adjustment"

This function cuts the motor-driven forces exerted on the blinds if there is no endstop.

Function activation

Function deactivation

The blind rolls down by 1 step

10 s

Operation (continued)

3 - Learning an opening position (PRESET mode)

1 - Set the required opening level

2 - Save the set opening level

The blind rolls down 1 step

10 s

The level is saved

This product can save a selected intermediate opening level.

One press on the Stop button (blind stopped) opens the blind to the selected level (this PRESET function does not save

slat angle).

8mm

E2E1

Transmitter

Centralised blind control

e.g. 7756 26

Receiver

Individual blind control

e.g. 7756 23

Operation (continued)

Example: creating a general control:

Control an individual blind control using a centralised blind control

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere LEGRAND Controller Handbücher

LEGRAND

LEGRAND Arteor 5 742 74 Bedienungsanleitung

LEGRAND

LEGRAND 026 21 Bedienungsanleitung

LEGRAND

LEGRAND ON-Q LC6400 Bedienungsanleitung

LEGRAND

LEGRAND 288 12 Bedienungsanleitung

LEGRAND

LEGRAND PRO 21 7756 22 Bedienungsanleitung

LEGRAND

LEGRAND Mosaic 335 25 Bedienungsanleitung

LEGRAND

LEGRAND Wattstopper LMPL-111-20M Bedienungsanleitung

LEGRAND

LEGRAND Wattstopper LMRC-611MCC Bedienungsanleitung

LEGRAND

LEGRAND Wattstopper DLM LMJA-8 Series Bedienungsanleitung

LEGRAND

LEGRAND Wattstopper DCLV2 Bedienungsanleitung

LEGRAND

LEGRAND Wattstopper DCLV2 Service-Handbuch

LEGRAND

LEGRAND 0 488 64 Bedienungsanleitung

LEGRAND

LEGRAND DPX-IS 630 Bedienungsanleitung

LEGRAND

LEGRAND Adorne WNACB40 Bedienungsanleitung

LEGRAND

LEGRAND Adorne LC7001 Bedienungsanleitung

LEGRAND

LEGRAND FSIR-100 Bedienungsanleitung

LEGRAND

LEGRAND 0670 53 Bedienungsanleitung

LEGRAND

LEGRAND 672 40 Bedienungsanleitung

LEGRAND

LEGRAND 784 28 Bedienungsanleitung

LEGRAND

LEGRAND Valena Next Bedienungsanleitung

LEGRAND

LEGRAND Wattstopper LMRC-111-16M Bedienungsanleitung

LEGRAND

LEGRAND 0 261 19 Bedienungsanleitung

LEGRAND

LEGRAND Arteor 5722 93 Bedienungsanleitung

LEGRAND

LEGRAND Raritan Smart Rack Controller Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung