LEGRAND QMotion Qsync Bedienungsanleitung

QMotion

Qsync™ Network Gateway

Installation Instructions

No: 9000249 – 02/18 rev. 2

Qsync

Country of Origin: Made in China

FEATURES AND OPERATION OVERVIEW

IDENTIFY PARTS OF THE QSYNC PACKAGE

OVERVIEW

COMPATIBILITY

QMotion’s Qsync™ is a network gateway for QMotion automated shades. The

Qsync system with the QMotion app enables control of all QMotion products

including motorized roller shades, honeycomb shades, and motorized drapery

rods. QMotion shades move up and down easier than sending a text message.

The updated version is available for iOS and Android.

The Qsync application is compatible with both Gen2 and Gen3 shades. Please

conrm the correct Qsync is installed to match the technology of the shades.

Verify the contents of the Qsync

package and gather materials:

A. Ethernet Cable

B. Qsync

C. Antenna

D. Power Adapter

• Smartphone and tablet control from many units on the same Qsync network system

• Sends QMotion commands as a standard remote would

• Use pictures and names to identify groups or zones

• Create groups that can be controlled together

• Set up once on a single device, then the settings load to the other smartphones and tablets automatically

A B

No: 9000249 – 02/18 Rev. 2 2

ASSEMBLY INSTRUCTIONS

STEP 1 Attach the antenna to the Qsync by screwing it onto the

coaxial connector on Qsync’s back plate. For best performance,

position the antenna as high up as possible and without

obstructions between it and the shades.

STEP 2 Plug the power cord into Qsync’s front plate. Plug the

cord into a power outlet.

STEP 3 Connect Qsync to one of your router’s LAN ports using

an Ethernet cable. Do not use the Internet Port. Qsync will

only receive commands from this WiFi network (WAN). Before

continuing, ensure that your phone or tablet is connected to this

router’s WiFi network.

Coax

Connector

Power Connector

INSTALLING THE QSYNC APP

Download and Install the “QMotion Qsync” app from the App

Store or Google Play by searching under that name. Open the

QMotion Qsync app. The screen shown allows you to select

Qsync devices on the same WiFi network.

No: 9000249 – 02/18 Rev. 2

ADDING A GROUP AND ADD/DELETE SHADES IN A GROUP

EDITING AN EXISTING SHADE GROUP

To add a group of shades, tap .

You can also swipe from the left to

view groups.

Name the group. Add shades by

selecting Add Shades. Delete

shades by selecting Remove

Shades. Follow on-screen

instructions for each. Shades can

be added to one or multiple groups.

Tap the icon to edit an existing

group and add/remove shades.

Tap to add a new group.

NOTE: Max # groups supported:

AM/FM: 200

No: 9000249 – 02/18 Rev. 2

Conrm deletion.

DELETING A SHADE GROUP

To delete a group of shades, tap .

You can now use the control

buttons to change shade positions.

Alternatively, you can swipe the

on-screen shade to the position you

desire.

USING QSYNC WITH GROUPS

Tap on the group you would like

to control. You can control synced

groups you created.

To get started, rst select a group

by tapping .

Choose the group name that you wish to

delete. For Apple Devices, swipe that name

to the left. For Android Device, press and hold

the group name you wish to delete. Then you

will see an option to delete the group. Tap the

red delete button to delete that group. Please

note, in order for future groups to be added

correctly, you must remove every shade from

the group prior to deleting it.

No: 9000249 – 02/18 Rev. 2

USING QSYNC WITH SCENES

To begin, tap on the main page. Then

select the scenes section.

Tap to add a new scene. You

can also click to edit an existing

scene.

You can add one or multiple groups

to a scene. You can also set the

position for each group within that

scene to a desired setting. When

you access the scene, all the shade

groups within that scene will go to

the new position set by that scene.

SHADE ADDITION AND REMOVAL

1. Follow the instructions in the app

• Once the shades have reached their top position, tug them and then press next

2. If the shades do NOT respond or reach their top position:

• First try to use the remote control device to return the shade to their top position

• If that doesn’t work, use a short, quick tug on the shade to return the shade to the top position

- Note: this may take multiple attempts

• Finally, if the shade is still unresponsive, remove the batteries (one will sufce) for 30 seconds to perform

a hard reset of the shade

- The shade should eventually time out after a minute or two and return to its top position and

be ready for addition/removal from the app

- If the shade does not, try to resync it with your remote control and move it to its top position

- If this still doesn’t work, repeat all the steps above until shade becomes responsive

- Call support for further help if the shade still doesn’t respond

SHADE LIMIT CONFIGURATION

1. Follow the instructions in the app

2. If for some reason this fails, most likely due to network connectivity/RF interference, the shade might

become unresponsive and seemingly removed from the group

• Wait 1 - 2 minutes to see if the shade times out and returns to top position which at this point it

should be responsive to group commands once again

• If the above doesn’t work, use a short tug command to get it to return to top position

• If that doesn’t work, follow the steps in the Shade Addition and Removal tips above

TROUBLESHOOTING

No: 9000249 – 02/18 Rev. 2

GROUP DELETION AND ADDITION

1. Shades are added to groups based on “Channel Numbers” which are a simple identier number linking them to the group

NOTE: Max # groups supported: AM/FM: 200

2. Shades are NOT added to groups based on group names.

3. Groups (Channel Numbers) are stored locally on the shade

• This means that shades NEED to be deleted from groups before the group is deleted to let the shade

know they are no longer part of that group

• If you do not delete them from the group before removing the group, any new groups created that

have the same channel ID as the old group will inherit the previous group’s collection of shades

• The above is intended behavior and should be taken into consideration when creating and deleting group

4. When adding or deleting a group, if the group does not show up in My Groups list, this may be due to a poor network connection.

To resolve, exit out of the app by tapping . Re-open the app. If this has not xed the problem, your device could be having WiFi

connectivity issues. Check for a WiFi connection or try to move closer to the WiFi router

OTHER UNEXPECTED BEHAVIOR

If you encounter any other non-documented, unexpected behavior, this is most likely due to network connectivity

and/or RF interference.

1. Try closing the program completely, not just minimizing it, and restarting the app

• iOS - double click the home button and swipe up on the app window

• Android - various, on stock OS, tap the square button in the toolbar at the bottom and swipe the app window to the right

2. If this doesn’t work, try resetting the Qsync from the settings page accessible by clicking the “i” button on the Qsync selection page

3. Next try a hard restart by unplugging the power cable from the Qsync, waiting 30 seconds, and then plugging back in

TROUBLESHOOTING (continued)

4. Finally, if all else has failed, from the settings page, click the “erase” option

• Warning, only use this as your last option as all groups and scenes will be

deleted and will need to be recreated

• Note: before erasing the Qsync, remember to remove all shades from any groups

5. If issues persist, please call or email QMotion support

If you still experience difculties,

please call toll-free

1.877.849.6070

QMotion

®Qsync

MODEL: QMRS-433FM

Is in conformity with:

MACHINERY DIRECTIVE: 2006/42/EC

RE DIRECTIVE: 2014/53/EU

RoHS DIRECTIVE: 2011/65/EU

And the following:

EN 13120:2009+A1:2014 (Internal Blinds)

IEC 60335-1:2010 (5th Ed.) incl. Corr. 1:2010 &

Corr. 2011+A1:2013

EN 60335-1:2012+A11:2014

EN 60335-2-97:2006+A11:2008+A2:2010

IEC 60335-2-97:2002 (2nd Ed.)+A1:2004+A2:2008

EN ISO 12100:2010 (Machinery assessment)

EN ISO 13857:2008 (Machinery assessment)

EN 300 220-1 v3.1.1 (2017-02)

EN 300 220-2 v3.1.1 (2017-02)

EN 301 489-3 v2.1.1 (2017-02)

EN 301 489-1 v2.1.1 (2017-03)

IEC 61000-4-2: Ed. 2.0

IEC 61000-4-3: Ed. 3.2

CISPR 16-2-3 1st Ed.2003

Qsync, model QMRS-433FM, when installed and maintained

according to the entire manufacturer’s instructions, meets the

provisions of the above listed EU Directives.

Ton de Zeeuw

Contact for QMotion

Raritan Europe B.V.

Jan van Galenstraat 59

3115 JG Schiedam

The Netherlands

Tel: +31.(0)10.2844040

Fax: +31.(0)10.2844049

VAT: NL803738614B01/KvK-CoC:24256806/EORI:NL803738614

QMotion

3400 Copter Road

Pensacola, FL 32514

Toll Free: 877.859.6070

Fax: 850.208.3409

USA

If you still experience difculties,

please call toll-free

1.877.849.6070

CE COMPLIANCE - QSYNC-433FM

QMotion

®Qsync

MODEL: QMRS-433AM

Is in conformity with:

R&TTE DIRECTIVE: 1999/5/EC

COUNCIL DIRECTIVE: 93/68/EEC

RoHS DIRECTIVE: 2011/65/EU; 2002/95/EC

And the following:

EN 300 220-1 v2.3.1 (ERM/SRD - technical characteristics & test methods)

EN 300 220-2 v2.4.1 (ERM/SRD - harmonized essential requirements)

EN 301 489-1 v1.9.2 (ERM/EMC - common technical requirements)

EN 301 489-3 v1.4.1 (ERM/EMC - specic conditions for short range devices)

EN 61000-3-2/-3 (Harmonics & Flicker)

IEC 60335-1:2001 4th Ed. incl. Corrigendum 1:2002 + A1:2004 + A2:2006 incl. Corringendum 1:2006

EN 60335-1: 2002 + A11:2004 + A1:2004 + A12:2006 + A2”2006 + A13:2008 + A14:2010 + A15:2011

AS/NZS 60335-1:2011

Qsync, model Qsync-433AM, when installed and maintained according to the entire Manufacturer’s Instructions, meets the provisions

of the above listed EU Directives.

François Médart

Contact for HomeRun Holdings Corp.

11 Bis rue du petit Guyencourt

51220 CORMICY

FRANCE

QMotion

3400 Copter Road

Pensacola, FL 32514

Toll Free: 877.859.6070

Fax: 850.208.3409

USA

800.555.9891

www.legrand.us/qmotion

No. IS-9000249 – 02/18 rev. 2

Inhaltsverzeichnis

Andere LEGRAND Tor Handbücher

LEGRAND

LEGRAND radiant WNRH1WH Bedienungsanleitung

LEGRAND

LEGRAND Bticino SCS Bedienungsanleitung

LEGRAND

LEGRAND adorne WNAH2 Bedienungsanleitung

LEGRAND

LEGRAND adorne WNAH2 Bedienungsanleitung

LEGRAND

LEGRAND 4 130 39 Bedienungsanleitung

LEGRAND

LEGRAND KNX DALI Bedienungsanleitung

LEGRAND

LEGRAND radiant WNRH2 Bedienungsanleitung

LEGRAND

LEGRAND radiant WNRH1 Bedienungsanleitung

LEGRAND

LEGRAND bticino 0883 28 3578 Bedienungsanleitung

LEGRAND

LEGRAND 0 026 99 Bedienungsanleitung

LEGRAND

LEGRAND Arteor 5 742 09 Bedienungsanleitung

LEGRAND

LEGRAND adorne WNAH1 Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung