LEGRAND Galaxy Bedienungsanleitung

Galaxy Installation Manual

SERVERS

■ Server unit (x 1)

■ Antenna (x 2)

■ Mains power supply adapter and cable-Black (x 1)

■ Mounting screws (x 4 pcs)

■ Server unit (x 1)

■ Antenna (x 2)

■ Mains power supply adapter and cable - Black (x 1)

■ Connectors - Green (x 3)

■ Mounting bracket (x 2)

■ Mounting screws (x 4 pcs)

Power button LED indicator

■ Amber - Standby power

■ Blue - Power ON

■ OFF - Power OFF

HDD LED

■ Flashing during hard drive activity

PWR LED indicator

■ Green - Power ON

■ OFF - Power OFF

4 LAN Ports

Power button LED indicator

■ Blue - Power ON

■ OFF - Power OFF

2 LAN Ports (Small server)

Large server (Cat. No: 659182)

Medium server (Cat. No: 659181) / Small server (Cat. No: 659180)

Galaxy Installation Manual

STATIONS

■ Station unit (x 1)

■ Antenna (x 1)

■ Mains power supply cable (x 1)

■ Wall Mounting bracket with screws (x 1)

■ Station unit (x 1)

■ Earthing wire and glands (x 1)

■ Large Antenna (x 1 Large Station only)

■ Antenna cable (x 1 Large Station only)

■ Antenna Adapter (x 1 Large Station only)

■ POE injector with power cable (x 1)

■ Wall Mounting bracket with screws (x 1)

LED1

LED2 LED3

LED 1 - Power

■ Red (Blinking) - During system initialisation

■ Green (Blinking) - During system initialisation

■ Green - When initialisation is complete

LED 2 - Communication

■ Red - During system initialisation / Communication

disconnected

■ Green (Blinking) - During communication initialisation

■ Green - Communication established

LED 3 - Communication traffic

■ Red - During initialisation

■ Green (Blinking) - Indicated data is being received

■ Red (Blinking) - Indicated data is being sent

Small Station (Cat. No: 659183)

Large Station (Cat. No: 659185) / Medium Station (Cat. No: 659184)

LED Indications

■ Green - Power ON

■ Red (Blinking) - During system initialisation

■ OFF - When initialisation is complete

Large station

Medium station

Green LED Red LED

Station mounting bracket must be installed

before the station is mounted onto the wall

mounting bracket.

Galaxy Installation Manual

MOUNTING BRACKETS

Large station mounting

Medium station mounting

Small station mounting

WITHOUT ADAPTER WITH ADAPTER

Earthing the Medium and Large Stations

The station is provided with a green/yellow cable for earthing. A pre-existing screw hole is available on the metal

enclosure of the station, marked with an earth symbol (as shown).

Earthing the Station mounting bracket

It is strongly recommended to earth the station mounting bracket to prevent surges that may damage the station.

Earthing can be completed by:

■Pole mounting: By using the metallic strapping.

■Wall mounting: By using M4 screws (provided). The earthing connection is done through a ring terminal. A specific

crimping tool is required to perform the operation. The earthing cable must be crimped inside this

ring terminal.

■ Isolate 240 V mains supply before maintenance or installation.

■ None of the devices should be switched On/OFF after installation.

■ Follow the LED indicator functions.

■ Make sure the antenna is pointing vertically upwards (Large station only).

■ The antenna should be placed away from the walls and surfaces in order to perform effectively (Large station only).

■ Please note that mounting bracket must be installed to achieve optimum performance.

■ Secure the stations onto the mounting bracket onto the desired wall or structure before connecting.

Galaxy Installation Manual

Things to consider before/after installation

Earthing Galaxy Stations and Accessories

Connect to the unit

Connect to installation earthing structure

Galaxy Installation Manual

1. Plug the power cord of all units into the power outlet (Do not turn ON).

2. Connect the Server, POE and Station to an available ethernet socket outlet. Ensure that the Server and Stations

are on the same subnet (local IT may need to assist).

3. Turn ON the power at the outlet and the Server will automatically turn ON.

Note: Contact Legrand prior to installation and for commissioning.

Ethernet connectivity

Ethernet connection

Note: Maximum distance between POE injector and the station should be < 100 m.

Large Station

Small Station

Large Server

POE injector

IN OUT

Galaxy Installation Manual

1. Plug the power cord of all units into the power outlet (Do not turn ON).

2. Make a direct connection from the Server to the Station using the Legrand yellow Cat 6 cable (Cat. No. 659187).

Stations are wired back as a star formation to the Server if there is more than one Station on site. A galaxy LAN

extender accessory (Cat. No: 659187) must be used if the distance between the Server and Station exceeds 100 m.

3. Turn ON the power at the outlet and the Server will automatically turn ON.

Note: Contact Legrand prior to installation and for commissioning.

Direct connection

Large Station

Small Station

POE injector

Large Server

OUT

Ethernet extender kit (Cat. No: 659188)

Application diagram

Galaxy Installation Manual

LE12635AB 03/2021

Warranty

Legrand Australia Pty Ltd warrants this product for a period of 5 years from the date of purchase.

These goods come with guarantees that cannot be excluded under the Australian and New Zealand

Consumer Laws. You are entitled to a replacement or a refund for a major failure and compensation

for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired

if the goods fail to be acceptable quality and the failure does not amount to a major failure.

Paper

GALAXY ACCESSORIES

LED indication

ON: Power good ON: Link

FLASH: Activity

The green LED may blink quickly while connecting (for extremely long runs, it may take a few seconds to optimise the link).

POE Status (Green)

In normal operation, the LEDs will display the power available in flashing or steady green:

510 15 20 25

POE power available for station (or other POE-compliant device) in watts.

ON = POE enabled to station

FLASH = POE not enabled, no compliant device detected

Cat 6 (Cat.No 659187)

1.8 m

POE Injector

Galaxy Server

Galaxy Station

Power

Supply

The power level is displayed after the station-side unit has powered up. Available power depends on the cable length, cable

gauge,and the POE source used.

Customer Service

For all Customer Service and Technical Support enquires

please call Monday to Friday during business hours.

Legrand Australia

1300 369 777

www.legrand.com.au

Legrand New Zealand

0800 476 009

www.legrand.co.nz

ABN: 31 000 102 661

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere LEGRAND Server Handbücher

LEGRAND

LEGRAND Raritan DKX3-UST Bedienungsanleitung

LEGRAND

LEGRAND F454 Bedienungsanleitung

LEGRAND

LEGRAND bticino BT-3583 Bedienungsanleitung

LEGRAND

LEGRAND Raritan Dominion SX II Bedienungsanleitung

LEGRAND

LEGRAND On-Q CM1019 Bedienungsanleitung

LEGRAND

LEGRAND Raritan Dominion SX II Bedienungsanleitung

LEGRAND

LEGRAND CM2002 Bedienungsanleitung

LEGRAND

LEGRAND Omizzy Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung