LEGRAND VADDIO AV Bridge 2x1 Bedienungsanleitung

Installation Guide for the

AV Bridge 2x1

Presentation Switcher

Document 411-0042-31 Rev A

March 2020

Contents

Overview 1

About this Guide 1

Features 1

Unpacking the AV Bridge 2x1 2

A Quick Look at the AV Bridge 2x1 3

Front Panel 3

Connector Panel 4

Installation 5

Don’t Void Your Warranty! 5

Cabling Notes 5

Basic Connections 6

Basic Connections for Conferencing 7

Using Dante Devices with AV Bridge 2x1 7

RS-232 Serial Communication Settings and Port Pin-outs 8

Powering Up 8

Next Steps 8

Troubleshooting and Care 9

Power Issues 9

Operation, Storage, and Care 10

Compliance and Conformity Statements 11

FCC Part 15 Compliance 11

ICES-003 Compliance 11

European Compliance 12

Photo Credits 13

Index 14

Glossary 16

Overview

This guide provides information about the AV Bridge 2x1 presentation

switcher:

n999-8250-000 – North America

n999-8250-001 – Europe/UK

n999-8250-009 – Australia/New Zealand

About this Guide

This guide covers:

nTips for a successful installation

nConnection diagram

nEquipment power-on

Features

nThe perfect solution for rooms where you only need two cameras:2x1 video switcher bridges two HDMI

cameras or other video sources into a soft-client conferencing or IP streaming environment

nSimultaneous USB 3.0 and IP streaming (RTSP or RTMP), video and audio

nDelivers IP stream resolution up to 1080p/30 and USB stream resolution up to 1080p/60

nSupports HDCP

nMultiple audio formats: USB and IP stream, analog, HDMI, Dante®

nPhantom power to microphones

nConnections for up to five external trigger devices

Installation Guide for the AV Bridge 2x1 Presentation Switcher

Unpacking the AV Bridge 2x1

Make sure you received all the items you expected. Here is the packing list for the AV Bridge 2x1.

AV Bridge 2x1, North America: 999-8250-000

AV Bridge 2x1, Europe and UK: 999-8250-001

AV Bridge 2x1, Australia and New Zealand: 999-8250-009

nAV Bridge 2x1

nPoE+ power injector with AC cord set(s)

nHalf-rack mounting kit

n3-position Phoenix-style connectors (qty. 4)

nCat-5 cable, 3 ft (0.9 m)

nUSB 3.0 cable, type A to type B, 6 ft (1.8 m)

nQuick-Start Guide

Optional dual half-rack and under-table mounts are also available on

legrandav.com. Contact us if you can't find the mount you need.

Installation Guide for the AV Bridge 2x1 Presentation Switcher

A Quick Look at the AV Bridge 2x1

Physical features of the device – controls, indicators, and connectors.

Front Panel

nSwap button:

oChanges the selected input.

oExchanges the PIP and main image on the HDMI output, if the PIP is turned on.

nPIP button:

oToggles the PIP on or off.

oIlluminated: PIP is on.

oOff:PIP is off.

nStream button:

oToggles the stream on or off.

oIlluminated: Stream is available.

oOff: Stream is not available.

nIP button:

oPress to display the device's IP address in the streams. Press again to dismiss the IP address

information.

oIlluminated: Streams and local HDMI output are displaying the IP address.

oOff: Normal display.

nReset button:

oPress to reboot the device.

oIlluminated: Normal operation.

oOff: No power to the device.

oBlinking: Error.

nDimensionally enhanced puffy badge: We have spared no expense to provide a lovely, dimensionally

enhanced logo badge to elevate your visual experience. It's quite shiny. We hope you'll enjoy it.

Installation Guide for the AV Bridge 2x1 Presentation Switcher

Connector Panel

nNetwork/PoE+ – Power, control via web interface, Dante audio, and IP streaming.

nUSB 3.0 – Uncompressed video output with PCM audio for conferencing applications.

nRS-232 – Connect to an optional third-party control system.

nTrigger – Connect up to five trigger devices.

nHDMI In 1 and HDMI In 2 – HDMI video (and audio, if available)from the connected camera or other

HDMI source.

nHDMI Out – Output video (and audio, if available) from the selected input.

nAudio In Mic/Line 1 and Mic/Line 2 – Microphone or other audio inputs. Can be configured to supply

phantom power.

nAudio Out Line 1 and Line 2 – Far-end audio from conferencing application or as configured in the

audio matrix.

Installation Guide for the AV Bridge 2x1 Presentation Switcher

Installation

This section covers how to install and connect the product. It also provides safety information and other

guidance related to installing the product.

Note

This product is intended for installation and use only in environments where all RS-232 and PoE/PoE+

connections originate within the building.

Or in UL's preferred phrasing...

PoE-type networks connected to this equipment are for intra-building use only and should not be

connected to lines that run outside the building in which this product is located.

Don’t Void Your Warranty!

Caution

This product is for indoor use. Do not install it outdoors or in a humid environment without the appropriate

protective enclosure. Do not allow it to come into contact with any liquid.

Do not install or operate this product if it has been dropped, damaged, or exposed to liquids. If any of these

things happen, return it to Vaddio for safety and functional testing.

Cabling Notes

Use Cat-5e or better cable and standard RJ-45 connectors (568B termination). We recommend using high-

quality connectors and a high-quality crimping tool.

Caution

When building cables for Vaddio products, do not use pass-through RJ-45 connectors. If

they are crimped incorrectly, they can cause intermittent connections and degrade signal

quality. Incorrectly crimped pass-through connectors can also damage the connectors on

the product, which will void your warranty.

Intact – will make reliable contact

with cable connector

Damaged – Bent contact fingers

will NOT make reliable contact

with cable connector

Use Cat-5e or better cable. We recommend using high-quality connectors and a high-quality crimping tool.

We recommend shielded cabling if the cables will be coiled, run tightly with other cables, or placed close to

sources of electromagnetic interference such as power lines.

Caution

Check your cables. Connecting a cable to the wrong port or using the wrong pin-out can result in equipment

damage and will void the warranty.

Pro Tip

To prevent tragic mishaps, label both ends of every cable.

Installation Guide for the AV Bridge 2x1 Presentation Switcher

Basic Connections

This diagram shows a basic installation. Cameras or other HDMI sources may be used for both HDMI

inputs. The AV Bridge 2x1 does not power the speaker(s). The HDMI output displays video from the

selected source; the picture-in-picture (PIP) is from the video source not currently selected – a camera,

laptop, or other video source.

Installation Guide for the AV Bridge 2x1 Presentation Switcher

Basic Connections for Conferencing

Add a laptop and a second HDMI display for conferencing.

In this diagram, the laptop connects to the room's main display, which shows the far-end video from the

soft conferencing application on the laptop. (In contrast to the previous diagram, our friend at the podium is

on the far end of the call.) The soft conferencing application manages the PIP(s) in this image. The display

connected to the HDMI output shows near-end video.

The HDMI output from the AV Bridge 2x1 goes to a "confidence display" showing near-end video only. The

image on this display is used as the near-end PIP on the main display. If the PIP is enabled on the AV

Bridge 2x1, this is part of the image that others in the conference will see, and the room's main display

shows a PIP within the near-end PIP.

Using Dante Devices with AV Bridge 2x1

The AV Bridge 2x1 presentation switcher is compatible with Dante audio products. These products

connect to the AV Bridge 2x1 over the network.

To work with Dante devices, you will need to download and install the free Dante Controller application

from Audinate Pty. Ltd.:

www.audinate.com/products/software/dante-controller

Things to know about Dante Controller:

nDante Controller does not work over Wi-Fi or across subnets. Your computer must be on the same

subnet as the Dante devices you need to work with.

nDevice names and IP addresses shown in Dante Controller do not match the corresponding information

shown in Vaddio devices' web interfaces.

nDante Controller allows you to rename devices, so you can make their identifying labels match what's

displayed in the Vaddio web interface.

Audinate provides information, training, and documentation for Dante technology on their website.

Installation Guide for the AV Bridge 2x1 Presentation Switcher

RS-232 Serial Communication Settings and Port Pin-outs

The RS-232 serial port (color-coded blue) on the back panel connects to a third-party controller.

RS-232 connector pin-out:

nPin 1: Not used

nPin 2: Not used

nPin 3: Not used

nPin 4: Not used

nPin 5: Not used

nPin 6: GND

nPin 7: TXD

nPin 8: RXD

Communication parameters:

Parameter Value

Communication Speed 38400 bps

Start bits 1

Stop bits 1

Data bits 8

Parity None

Flow control None

Caution

Check your cables. Connecting a cable to the wrong port or using the wrong pin-out can result in equipment

damage and will void the warranty.

Depending on the equipment connected to the RS-232 port, you may need a null-modem (crossover) cable.

Powering Up

Power up the AV Bridge 2x1 and the connected equipment at the same time, or power up the connected

equipment before you power up the AV Bridge 2x1.

Next Steps

The AV Bridge 2x1is now ready to configure. Until the product is fully configured, its full functionality is not

available. This information is available in the Complete Manual for the AV Bridge 2x1Presentation

Switcher.

Download manuals, dimensional drawings, and other information from www.vaddio.com/support.

Installation Guide for the AV Bridge 2x1 Presentation Switcher

Inhaltsverzeichnis

Andere LEGRAND Schalten Handbücher

LEGRAND

LEGRAND Celiane 0 677 26 Bedienungsanleitung

LEGRAND

LEGRAND Valena Life 7 521 84 Bedienungsanleitung

LEGRAND

LEGRAND In One 495 05 Bedienungsanleitung

LEGRAND

LEGRAND Arteor 5720 83 Bedienungsanleitung

LEGRAND

LEGRAND Luxul AV Series Bedienungsanleitung

LEGRAND

LEGRAND 5 743 12 Bedienungsanleitung

LEGRAND

LEGRAND Valena 7 418 07A Bedienungsanleitung

LEGRAND

LEGRAND Wattstopper AS-100-I Bedienungsanleitung

LEGRAND

LEGRAND DPX3 Bedienungsanleitung

LEGRAND

LEGRAND PW-100 Bedienungsanleitung

LEGRAND

LEGRAND Arteor 5 7 Series Bedienungsanleitung

LEGRAND

LEGRAND 4 130 10 Bedienungsanleitung

LEGRAND

LEGRAND DPX3 160 Bedienungsanleitung

LEGRAND

LEGRAND Plexo 0 698 76L Bedienungsanleitung

LEGRAND

LEGRAND AM5659 Bedienungsanleitung

LEGRAND

LEGRAND MicroRex D21 Bedienungsanleitung

LEGRAND

LEGRAND 496 05 Bedienungsanleitung

LEGRAND

LEGRAND XMS-1208P Bedienungsanleitung

LEGRAND

LEGRAND WNRL34 Bedienungsanleitung

LEGRAND

LEGRAND Wattstopper AS-100-A Bedienungsanleitung

LEGRAND

LEGRAND Mosaic Manageable switch Bedienerhandbuch

LEGRAND

LEGRAND 4128 58 Bedienungsanleitung

LEGRAND

LEGRAND Wattstopper DSW-302 Bedienungsanleitung

LEGRAND

LEGRAND radiant WNRL33 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung