Leica FLEXACAM C1 Bedienungsanleitung

FLEXACAM C1

12 MP Stand-Alone

Microscope Camera

User Manual

FLEXACAM C1 User Manual 2

Contents

General Notes

General Notes 5

Important Safety Notes 6

Symbols Used 7

Safety Instructions 8

End User License Agreement (EULA) 11

Introduction

Congratulations! 13

Standard Delivery and Optional Accessories 14

Optional Accessories 15

Overview of the Instrument 16

Assembly

Assembling the Camera 18

Stand-Alone Operation Installation / Setup / Application

Cables and Terminals in HD Mode (Stand-Alone) 20

Switching on the FLEXACAM C1 21

Information About Thumb Drive/ USB Stick 22

Using the USB Thumb Drive as a Memory Device 23

Conﬁguring the USB Wireless Mouse 24

Conﬁguring the Footswitch 25

Capturing Images Without a Computer 26

Capturing Movies Without a Computer 27

White Balance 28

Menu of GALLERY View 29

PC Operation Installation / Setup / Application

Connecting a Computer, Installing Software, Activating PC Mode 31

Switching on the FLEXACAM C1 32

Additional Parallel Use of an HD/ 4K Monitor 33

User Menu – On-Screen Display (OSD)

On-Screen Display (OSD) 35

Calling up and Closing the User Menu / OSD 36

CONTROL Menu 38

SETTINGS Menu 40

Menu of GALLERY View 42

Settings Network 43

Care and Maintenance

Care, Maintenance, Contact Persons 46

Spare Parts 49

FLEXACAM C1 User Manual 3

Contents (Continued)

Specications

FLEXACAM C1 51

Dimensional Drawings 52

Troubleshooting

Troubleshooting 54

Recovery Mode 55

FLEXACAM C1 User Manual General Notes 4

General Notes

FLEXACAM C1 User Manual General Notes 5

General Notes

Safety concept

Before using your Leica microscope camera for

the ﬁrst time, please read the "Safety Concept"

booklet included with your instrument. It

contains additional information on handling

and care.

Cleaning

ODo not use any unsuitable cleaning agents,

chemicals or techniques for cleaning.

ONever use chemicals to clean colored

surfaces or accessories with rubberized

parts. This could damage the surfaces,

and specimens could be contaminated by

abraded particles.

OFollow the notes regarding cleaning the

ﬁlter glass in the service section.

OIn most cases it is OK to use a wipe damp-

ened with 70 % ethanol in distilled water.

Servicing

ORepairs may only be carried out by Leica

Microsystems-trained service technicians.

Only original Leica Microsystems spare

parts may be used.

Responsibilities of person in charge of

instrument

OEnsure that the Leica microscope camera

is operated, maintained and repaired by

authorized and trained personnel only.

FLEXACAM C1 User Manual General Notes 6

Important Safety Notes

User manual

The FLEXACAM C1 microscope camera can be

conﬁgured in a variety of ways in the Leica

product range. You can ﬁnd information on

individual system components on the inter-

active CD-ROM together with all relevant user

manuals in additional languages. Keep this

CD-ROM in a safe place, where it is available

to the user. User manuals and updates are also

available for you to download and print from

our web site at www.leica-microsystems.com.

This user manual describes the special functions

of the FLEXACAM C1 and contains important

instructions for operating safety, maintenance

and the accessory parts.

The "Safety Concept" booklet contains addi-

tional safety information regarding the service

work, requirements and the handling of the

microscope camera, accessories and electrical

accessories as well as general safety instruc-

tions.

You can combine individual system articles

with articles from external suppliers (e.g. cold

light sources, etc.). Please read the User Manual

and the safety instructions from the supplier.

Before installing, operating or using the instru-

ments, read the user manuals listed above. In

particular, please follow all safety instructions.

To maintain the unit in its original condition

and to ensure safe operation, the user must

follow the instructions and warnings contained

in these user manuals.

FLEXACAM C1 User Manual General Notes 7

Symbols Used

Read and understand this user

manual before using this device.

Warning! Safety hazard!

This symbol indicates especially impor-

tant information that is mandatory to

read and observe. Failure to comply can cause

the following:

OPersonal injury!

OInstrument malfunctions and damage.

Warning of hazardous electrical voltage

This symbol indicates especially impor-

tant information. Failure to comply can

cause the following:

OPersonal injury!

OInstrument malfunctions and damage.

Instrument malfunctions and damage

This symbol warns against touching hot

surfaces, such as light bulbs.

Important information

This symbol indicates additional infor-

mation or explanations that are intended

to provide clarity.

FLEXACAM C1 User Manual General Notes 8

Safety Instructions

Description

OThe individual modules fulﬁll the high

requirements for observation and docu-

mentation of the FLEXACAM C1 microscope

camera.

Intended use

ORefer to "Safety Concept" booklet

Non-intended use

ORefer to "Safety Concept" booklet

Never use the FLEXACAM C1 or its components

for diagnostic procedures if it is not expressly

intended for such use.

The instruments and accessories described in

this User Manual have been tested for safety

and potential hazards.

The responsible Leica aﬃliate must be consul-

ted whenever the instrument is altered, modi-

ﬁed or used in conjunction with non-Leica

components that are outside of the scope of

this manual!

Unauthorized alterations to the instrument or

noncompliant use shall void all rights to any

warranty claims.

Place of use

ORefer to "Safety Concept" booklet

OElectrical components must be placed at

least 10 cm away from the wall and from

ﬂammable substances.

OAvoid large temperature ﬂuctuations, direct

sunlight and vibrations. These conditions

can distort the functionality of the camera.

OIn warm and damp climates, the individual

components require special care in order to

prevent the build-up of fungus.

Responsibilities of person in charge of

instrument

ORefer to "Safety Concept" booklet

Ensure that:

OThe FLEXACAM C1 and accessories are

operated, maintained and repaired by

authorized and trained personnel only.

OAll operators have read, understood and

observe this User Manual, and particularly

the safety regulations.

FLEXACAM C1 User Manual General Notes 9

Safety Instructions (Continued)

Repairs, service work

ORefer to "Safety Concept" booklet

OOnly original Leica Microsystems spare

parts may be used.

OBefore opening the instruments, switch oﬀ

the power and unplug the power cable.

OAvoid contact with powered electrical

circuits, which can lead to injury.

Transport

OBefore shipping the camera, please reset

the device to the factory default, so that no

personal data like access details to E-Mail or

network remain stored on the device.

OUse the original packaging for shipping or

transporting the individual modules of the

FLEXACAM C1 and the accessory compo-

nents.

OIn order to prevent damage from vibrations,

disassemble all moving parts that (accord-

ing to the user manual) can be assembled

and disassembled by the customer and

pack them separately.

Integration in third-party products

ORefer to "Safety Concept" booklet

Disposal

ORefer to "Safety Concept" booklet

Legal regulations

ORefer to "Safety Concept" booklet

EC Declaration of Conformity

ORefer to "Safety Concept" booklet

Health risks

Workplaces with microscopes facilitate and

improve the viewing task, but they also impose

high demands on the eyes and muscles of the

user. Depending on the duration of uninter-

rupted work, asthenopia and musculoskeletal

problems may occur. For this reason, appro-

priate measures for reduction of the workload

must be taken:

OOptimal arrangement of workplace, work

assignments and work ﬂow (changing tasks

frequently).

OThorough training of the personnel, giving

consideration to ergonomic and organiza-

tional aspects.

The ergonomic optical design and construction

of Leica microscopes are intended to reduce the

exertion of the user to a minimum.

FLEXACAM C1 User Manual General Notes 10

Safety Instructions (Continued)

Instrument safety and EMC

Our device has been designed, produced and

tested in compliance with

OEN 60950-1: Information technology equip-

ment – Safety – Part one: general require-

ments

ORadio interference suppression in compli-

ance with EN 55011 class B

OEN 61326-1, Electrical equipment for

measurement, control and laboratory use –

EMC requirements

The device meets the requirements of EU

directives

O2014/35/EU Low voltage directive

O2014/30/EU EMC directive

O2011/65/EU RoHS directive

O2009/125/EC + VO EU 1194/2012

Ecodesign requirements for energy-related

products

and carries the CE mark.

The device must be disposed of in

accordance with 2012/19/EU WEEE

directive.

Intended for indoor use only in all EU member

states, EFTA states and Switzerland.

Inhaltsverzeichnis

Andere Leica Digitalkamera Handbücher

Leica

Leica C-LUX 3 Gebrauchsanweisung

Leica

Leica V-Lux 3 Bedienungsanleitung

Leica

Leica D-Lux 2 Bedienungsanleitung

Leica

Leica M10- P ASC 100 Edition Bedienungsanleitung

Leica

Leica S Gebrauchsanweisung

Leica

Leica D-LUX 6 Bedienungsanleitung

Leica

Leica M7 Bedienungsanleitung

Leica

Leica SL2-S Bedienungsanleitung

Leica

Leica V-LUX 2 Bedienungsanleitung

Leica

Leica ICC50 HD Bedienungsanleitung

Leica

Leica V-LUX 1 Bedienungsanleitung

Leica

Leica D-Lux 3 Bedienungsanleitung

Leica

Leica C Bedienungsanleitung

Leica

Leica TL2 Bedienungsanleitung

Leica

Leica S3 Bedienungsanleitung

Leica

Leica M10-R Bedienungsanleitung

Leica

Leica M7 Gebrauchsanweisung

Leica

Leica Q3 Bedienungsanleitung

Leica

Leica M8.2 Safari Bedienungsanleitung

Leica

Leica CALONOX SIGHT SE Bedienungsanleitung

Leica

Leica X2 Bedienungsanleitung

Leica

Leica M6 Bedienungsanleitung

Leica

Leica M8 Bedienungsanleitung

Leica

Leica V-LUX 20 Bedienungsanleitung

Beliebte Digitalkamera Handbücher anderer Marken

Mercury

Mercury 350K Bedienungsanleitung

Pentax

Pentax Optio LS 465 Bedienungsanleitung

Sanyo

Sanyo VPC-S1085 Bedienungsanleitung

GE SMART A1255 Bedienungsanleitung

Point Grey

Point Grey Gazelle Bedienungsanleitung

Nikon

Nikon COOLPIX A Bedienungsanleitung

Pentax

Pentax P-5 Bedienungsanleitung

BlazeVideo

BlazeVideo A280 Bedienungsanleitung

Sony

Sony MCA-20 Bedienungsanleitung

Sony

Sony Alpha DSLR-A290 Bedienungsanleitung

ATIK Cameras

ATIK Cameras One Bedienungsanleitung

CohuHD Costar

CohuHD Costar 3930 Series Bedienungsanleitung

FujiFilm

FujiFilm FinePix A700 Bedienungsanleitung

Lorex

Lorex LNZ81P25 Series Bedienungsanleitung

GE J1470S Bedienungsanleitung

Sony

Sony A6700 Benutzerhandbuch

Canon

Canon EOS ELAN7 Bedienungsanleitung

Nikon

Nikon Coolpix 100 Bedienungsanleitung