Leica LASER ALIGNMENT DIGICAT 100 Bedienungsanleitung

Leica DIGICAT 100/200

English

Français

Español

Leica DIGICAT 100/200

User Manual

Version 3.1

English

2DIGICAT 100/200Introduction

Introduction

Purchase Congratulations on your purchase of a DIGICAT instrument.

This manual contains important safety directions as well as instructions for setting up the

product and operating it. Refer to "9 Safety Directions" for further information.

Read carefully through the User Manual before you switch on the product.

Product identification The model and the serial number of your product are indicated on the type plate.

Enter the model and serial number in your manual and always refer to this information when

you need to contact your agency or Leica Geosystems authorized service workshop.

Type: _________________________

Serial No.: _________________________

Introduction DIGICAT 100/200 3

Symbols The symbols used in this manual have the following meanings:

Trademarks • DIGICAT is a registered trademark of Cable Detection Limited.

All other trademarks are the property of their respective owners.

Type Description

Danger Indicates an imminently hazardous situation which, if not avoided, will

result in death or serious injury.

Warning Indicates a potentially hazardous situation or an unintended use which, if

not avoided, could result in death or serious injury.

Caution Indicates a potentially hazardous situation or an unintended use which, if

not avoided, may result in minor or moderate injury and/or appreciable

material, financial and environmental damage.

Important paragraphs which must be adhered to in practice as they enable

the product to be used in a technically correct and efficient manner.

4DIGICAT 100/200Table of Contents

Table of Contents

In this manual Chapter Page

1 How to Use this Manual 6

2 General Information 7

3 How the DIGICAT Functions 9

4 Basic Overview 10

5TracingModesSummary 15

6 How to Use the DIGICAT 17

7 The DIGISYSTEM and the DIGICAT 28

7.1 DIGISYSTEM 28

7.2 DIGITEX 29

7.3 SIGNAL CLAMP 30

7.4 PROPERTY CONNECTION SET 30

7.5 DIGITRACE 31

7.6 DIGIMOUSE 31

7.7 Locating with the DIGITEX 31

7.8 Locating the DIGIMOUSE 34

7.9 Wireless Communication 38

Table of Contents DIGICAT 100/200 5

8 Care and Transport 39

8.1 Transport 39

8.2 Storage 39

8.3 Cleaning and Drying 40

9SafetyDirections 41

9.1 General 41

9.2 Purpose 41

9.3 Limits of Use 42

9.4 Areas of Responsibilities 42

9.5 International Warranty 43

9.6 Hazards of Use 43

9.7 Electromagnetic Compatibility EMC 47

9.8 FCC Statement, Applicable in U.S. 50

10 Technical Data 52

Appendix A Functional Check 56

Appendix B Wireless Communication with DIGICAT 200GIS 62

Index 65

6DIGICAT 100/200How to Use this Manual

1 How to Use this Manual

It is recommended to set up the product while reading through this manual.

DIGICATTM100,

DIGICATTM200,

DIGICATTM200GIS

Is hereinafter referred to as DIGICAT.

Differences between the two models are marked and described. General pictures show a

DIGICAT 200 instrument.

DIGITEXTM8/33 Is hereinafter referred to as DIGITEX.

Index The index is at the back of the manual.

Instrument label On the DIGICAT instrument you will find a label that shows some important information by

means of illustrations. You will find some of these illustrations in this manual too. This

should help to get a clear connection between the instrument label and the information in

this manual.

General Information DIGICAT 100/200 7

2 General Information

Many services are

buried underground

Why we detect and

locate services

•Torepairthem

• To avoid (damaging) them

• To document them

Why do we require Underground Service

Location Systems ? This is Why!

Highway

????

Highway

Surface Water Drain

Foul Sewer Drain

Gas High and Low

Voltage Electricity

8DIGICAT 100/200General Information

How we detect and

locate services

• Using Plans and drawings:

Drawings, plans or information should always be obtained but they may be faulty or

incomplete. The difficulty of obtaining information about buried utility lines is that

nothing is visible.

• Electromagnetic location:

This method of locating buried pipes, cables and sewers has become almost universal.

The main shortcoming is that it will not locate non-metallic lines such as plastic pipes.

However, utilities taking the small amount of trouble to lay tracer wires with plastic pipes

are not affected by this shortcoming.

The technology has a large number of advantages and Leica Geosystems specialize in

developing and exploiting electromagnetic location technology.

Andere Handbücher für LASER ALIGNMENT DIGICAT 100

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Leica Sicherheitssensor Handbücher

Leica

Leica DIGICAT 500i Bedienungsanleitung

Leica

Leica DSX Bedienungsanleitung

Leica

Leica DD120 Bedienungsanleitung

Leica

Leica Ultra Bedienungsanleitung

Beliebte Sicherheitssensor Handbücher anderer Marken

THORLABS

THORLABS PDA10JT Bedienungsanleitung

Waeco

Waeco UV-DETECT Bedienungsanleitung

Intermatic

Intermatic IOS-DSIMF Bedienungsanleitung

urmet domus

urmet domus 1083 Bedienungsanleitung

Siemens

Siemens AZL66 Series Bedienungsanleitung

BTI

BTI Profiline Multi Finder Bedienungsanleitung

Challenger

Challenger SL01 Bedienungsanleitung

DMP Electronics

DMP Electronics 1122INT Bedienungsanleitung

Rielta

Rielta Ladoga MK-RK Bedienungsanleitung

Mirion Technologies

Mirion Technologies ACCURAD PRD Bedienungsanleitung

Bosch

Bosch DS835 Bedienungsanleitung

Lamptime

Lamptime ST05C Bedienungsanleitung

Ubiquiti

Ubiquiti MFI-MSC Bedienungsanleitung

Subsite

Subsite 910R Montageanleitung

Satel

Satel OPAL Pro Bedienungsanleitung

Aleph

Aleph XC-1XTEU Bedienungsanleitung

Pima

Pima LARIS QUAD Bedienungsanleitung

Solinst

Solinst 301 Bedienungsanleitung