LENCO DVT-220 Bedienungsanleitung

Contents

zIntroduction

zWarning

zCaution

zMain Unit Description

zRemote Control

zOSD basic adjustment

zDTV Features

zUSB/CARD Reader Operation

zSpecifications

zTrouble Shooting

Introduction

Thank you very much for your purchase of our product of LCD TV. It serves as a normal color

TV and PC monitor. To enjoy your set to the full from the very beginning, read this manual

carefully and keep it handy for ready reference.

INSTALLATION

①Locate the receiver in the room where direct light does not strike the screen. Total darkness or

a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended

for comfortable viewing.

② Allow enough space between the receiver and the wall to permit ventilation.

③Avoid excessively warm locations to prevent possible damage to the cabinet or premature

component failure.

④ This TV receiver can be connected to AC100-240V 50/60HZ.

⑤ Do not install the receiver in a location near heat sources such as radiator, air ducts, direct

sunlight, or in a place somewhere like close compartment and close area. Do not cover the

ventilation openings when using the set.

⑥The indicator light will last about 30 seconds to go out after cutting off the electricity, during

this period, you cannot repower it on until the indicator light goes out, thanks a lot for your

attention!

Warning

This symbol is intended to alert the user to avoid the risk

of electric shock, do not disassemble this equipment by anyone

except a qualified service personnel.

This symbol is intended to alert the user to the presence

of important operation and maintenance instructions in

the literature accompanying the equipment.

CAUTION: TO AVOID THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER- SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Caution

Highvoltagesare used in the operation of this product.

- Do not remove the back cabinet from your set. Refer

servicing to qualified service personnel.

Caution

To prevent fire or electrical shock hazard, Do not expose

the main unit to moisture.

Caution

Do not drop or push objects into the television cabinet

slots or openings. Never spill any kind of liquid on the

television receiver.

Caution

Avoid exposing the main unit to direct sunlight and other

source of the heat. Do not stand the television receiver

directly on other produces which give off heat. E. g. video

cassette players, Audio amplifiers. Do not block the

ventilation holes in the back cover. Ventilation is essential

topreventfailure of electrical component. Do not squash

power supply cord under the main unit.

Caution

Never stand on, lean on, push suddenly the product

or its stand. You should pay special attention to

children.

Caution

Do not place the main unit on an unstable cart stand,

shelf or table. Serious injury to an individual, and

damage to the television, may result if it should fall.

Caution

Whentheproductis not used for an extended period

of time, it is advisable to disconnect the AC power

cord from the AC outlet.

Caution

The LCD panel used in this product is made of glass.

Therefore,itcan break when the product is dropped

or applied with impact. Be careful not to be injured

by broken glass pieces in case the LCD panel breaks.

Main unit description

Control Panel Button Function

TV Terminal Connections

1 .USB input terminal.

2. HDMI input terminal.

3. VGA input terminal of simulation signal of PC.

4. PC AUDIO terminal.

5. SCART input terminal.

6. Video input terminal.

7. AUDIO input terminal.

8. ATV antenna/close circuit TV network port or DTV antenna port.

9. HEADPHONE output terminal.

Power Input Configuration

AC POWER

VOL+ : Volume up.

VOL- : Volume down.

CH+ : TV channel up.

CH- : TV channel down.

MENU : Press to select the main menu.

TV/AV : Select the input signal.

POWER : Switch on when at standby mode or enter the standby mode.

Optional Configuration as below:

Connect the USB/CARD storage to the USB/CARD

jack on the set.

NOTE

● It is only 500 mA MAX of DC current output when you connect with USB jack or CARD

socket.

● To ensure the Mobile HD works well, you should use other power supply for the Mobile HD.

And do not use the USB jack and CARD socket in the same time.

●It supports Mobile HD by connecting with USB jack. The partitions of the Mobile HD can’t be

more than 4 partitions. The max partition is 2TB. It supports FAT/FAT32 document. The max FAT

document is 4GB and the max FAT32 document is 2TB.

Remote control

POWER: Press this button to switch on the TV when at

standby mode or enter standby mode.

MUTE: Press this button to mute or restore sound.

NICAM/A2: In the TV condition, press this key to select

the sound effects.

SLEEP: Set the sleep timer.

ASPECT: Press to select the different picture size.

USB/CR: Press to select the MEDIA signal source.

(Used for models with USB/CR function only)

DISPLAY: Display TV information .

AUTO: Press to adjust the picture automatically in PC

mode.

PMODE: Select picture mode.

SMODE: Select sound mode.

DTV: Press to enter the DTV channel.

(Used for models with DTV function only)

SOURCE: Press to change signal source.

ENTER: Enter the selected option or perform the selected

operation.

MENU: Press this button to enter the main menu for

various optional adjustable setting.

EXIT: Exit the OSD (On-screen display).

0-9: Select and switch to a channel using 0 - 9.

-/--: Switch the program digit.

:Switch back and front between the current and

previous channels.

CH-/CH+: Change the channel up and down.

VOL-/VOL+:Adjust the volume.

INFO: Display some information of current program in

DTV mode.

(Used for models with DTV function only)

AUDIO: Press to select the DTV audio.

(Used for models with DTV function only)

FAV: Switch between custom set " Favourite List"

(Used for models with DTV function only)

TV/RADIO: Switch between DTV program and radio

program (only audio but not image).

(Used for models with DTV function only)

EPG: Enter electronic program guide.

(Used for models with DTV function only)

：Stop playing the MEDIA or stop to record.

(Used for models with USB/CR function only)

SUBTITLE: Open or close subtitle.

(Used for models with DTV function only)

TEXT: Press to enter the Teletext mode.

(Used for European region only)

：Press to start playing the MEDIA or to pause

playing.

(Used for models with USB/CR function only)

HOLD: Freeze a multi-page passage on screen in

Teletext mode. (Used for European region only)

:Starttorecord.

INDEX: Press this button to go to the index page in

Teletext.

(Used for European region only)

：Press to play backward.

(Used for models with USB/CR function only)

SIZE: Display the top, bottom or all of page to read

easily in Teletext mode.

(Used for European region only)

：Press to play forward.

(Used for models with USB/CR function only)

REVEAL: Press this button to reveal the hidden

information in Teletext page. Press again to hide the

information.

(Used for European region only)

：Skip to previous chapter

(Used for models with USB/CR function only)

SUBPAGE: Carry out the function of SUBCODE in the

text while enter the text display mode.

(Used for European region only)

：Skip to next chapter

(Used for models with USB/CR function only)

RED,GREEN,YELLOW, CYAN: Correpond to

the different colored subjects.

(Used for european region and USB/CR function only)

Inhaltsverzeichnis

Andere LENCO LCD-Fernseher Handbücher

LENCO

LENCO DVT-1533 Bedienungsanleitung

LENCO

LENCO TFT-1021 Bedienungsanleitung

LENCO

LENCO DVT-2632 Bedienungsanleitung

LENCO

LENCO DVT 2233 Bedienungsanleitung

LENCO

LENCO TFT-350 Bedienungsanleitung

LENCO

LENCO DVT-1523 - Bedienungsanleitung

LENCO

LENCO DVL-2214 Bedienungsanleitung

LENCO

LENCO DVT 1936 Bedienungsanleitung

LENCO

LENCO TFT-1026 Bedienungsanleitung

LENCO

LENCO DVT-2232 Bedienungsanleitung

LENCO

LENCO TFT-920 Bedienungsanleitung

LENCO

LENCO DVT-2621 Bedienungsanleitung

LENCO

LENCO DVT-194 Bedienungsanleitung

LENCO

LENCO TFT-2401 Bedienungsanleitung

LENCO

LENCO TFT-2411 Bedienungsanleitung

LENCO

LENCO TFT-2412 Bedienungsanleitung

LENCO

LENCO TFT-1028 Bedienungsanleitung

LENCO

LENCO DVT-154 Bedienungsanleitung

LENCO

LENCO DVT-2432 Bedienungsanleitung

LENCO

LENCO TFT-2412 Bedienungsanleitung

LENCO

LENCO DVT-2422 Bedienungsanleitung

LENCO

LENCO DVT-227 Bedienungsanleitung

LENCO

LENCO TFT-1020 Bedienungsanleitung

LENCO

LENCO DVT-224 Bedienungsanleitung

Beliebte LCD-Fernseher Handbücher anderer Marken

LG 32LC4R* Bedienungsanleitung

ViewSonic

ViewSonic N4200w-1 VS10945-1M Bedienungsanleitung

Salora

Salora 22LED1600 Bedienungsanleitung

Samsung

Samsung LA32E420 Leitfaden

Dell

Dell W1900 19 Gebrauchsanweisung

Samsung

Samsung LN40C670M1F Bedienungsanleitung

Samsung

Samsung Series 4+ Bedienungsanleitung

Samsung

Samsung 5 Series Bedienungsanleitung

Grundig

Grundig 40 VLE 8230 BP Bedienungsanleitung

Philips

Philips 43PFL4901/F7 Bedienungsanleitung

Sony

Sony Bravia XBR-43X830C Bedienungsanleitung

LG 32LS350 Bedienungsanleitung

VIORE

VIORE LED32VF60 Bedienungsanleitung

Toshiba

Toshiba Regza 42HL167 Bedienungsanleitung

JVC

JVC LT-32A220 Bedienungsanleitung

Philips

Philips 20TA1000/93 Bedienungsanleitung

Philips

Philips 32PFL3158T/12 Bedienungsanleitung

Sony

Sony Bravia KDL-V32XBR2 Bedienungsanleitung