LENCO MC-129 MP3 RDS Bedienungsanleitung

Digital Mini Component System

(

RADIO CASSETTE RECORDER

CD/MP3 PLAYER

)

-1

MP3

User

s Guide

E-

LOCATION OF CONTROLS

E-

IMPORTANT SAFETY INSTRUCTIONS

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD DO NOT USE THIS PLUG WITH AN EXTENSION CORD,

RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO

PRESENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean o

nly with dry cloth.

Do not block any ventilation openings. Insta

l in accordance with the manufactures instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce hea

Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has

two blades with one wider than the other. A grounding type plug has two blades and a third

grounding prong. The wide blade or the third prong are provided f

or your safety. If the provided

plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.

Protect the power cord from being walked on or pinched particularly at the plugs, convenience

receptacles, and at the poin

t where the exit from the apparatus.

11.

Only use attachments/accessories specified by the manufacturer.

12.

Unplug the apparatus during lightening sorts or when unused for long periods of time.

13.

Refer all servicing to qualified personnel. Servicing is required wh

en the apparatus has been

damaged in any way , such as power supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does

not operate normally, or has been drop

ped.

14.

This appliance shall not be exposed to dripping or splashing water and that not object filled with

liquids such as vases shall be placed on apparatus .

This lightning flash with

arrowhead symbol, within an

equilateral triangle, is

intended to alert the user to

the presence of insulated

dangerous voltage within the

products enclosure that may

be of sufficient magnitude to

constitute a risk of electric

shock presents

Warning: to reduce the risk of

electric shock, do not remove

cover (or back ) no user -

serviceable part inside.

Refer servicing to qualified

s e r v i c e p e r s o n n e l .

The exclamation point within

an equilateral triangle is

intended to alert the user to

the presence of important

operating and maintenance

(servicing) instructions in the

literature accompanying the

appliance.

ENGLISH

E-

NAMES OF CONTROLS

1. SPEAKERS (L & R)

16. CD STOP BUTTON

2. FUNCTION SWITCH

17. BAND S

WITCH

3. PHONES JACK

18. CASS. PAUSE KEY

4. CD

RANDOM

BUTTON

19. CASS. STOP/EJECT KEY

5. CD REPEAT BUTTON

20. CASS. FAST FORWARD KEY

6. CD PROGRAM

(MEMORY)

BUTTON

21. CASS. REWIND KEY

7. POWER ON/O

FF BUTTON

22. CASS. PLAY KEY

8. CD

ESP

BUTTON

23. CASS. RECORD KEY

STANDBY

INDICATOR

24. CASSETTE COMPARTMENT

10.

LCD DISPLAY

25. SPEAKER CONNECTORS

11.CD

COMPARTMENT

26. AC VOLTAGE SELECTOR(

for dual voltage only)

12.

REMOTE SENSOR

27. AC POWER PLUG

13.VOLUME

UP/DOWN

CONTROL

28. FM ANTENNA WIRE

14. CD PLAY/PAUSE BUTTON

15.

CD SKIP UP/DOWN

/RADIO TUNING

CONTROL

REMOTE CONTROL

POWER SWITCH

7. CD STOP /RADIO BAND

SELECTING BUTTON

CD REPEAT BUTTON

8. FUNCTION BUTTON

CD RANDOM BUTTON

9. CD MEMORY(PROGRAM)/EQ BUTTON

VOLUME UP/DOWN BUTTON

10. CD SKIP BACK/ RADIO TUNING DOWN BUTTON

CD PLAY/PAUSE BUTTON

11. MUTE BUTTON

CD SKIP NEX

T/RADIO TUNING UP BUTTON

12. BATTERY COMPARTMENT

INTRODUCTION

Thank you for purchasing this product.

Please read through these operating instructions, so you will know how to operate your equipment properly.

After you finished reading the instructions ma

nual, put it away in a safe place for future reference.

CAUTION:

Do not block the ventilation openings or holes.

Do not place any naked flame sources, such as lighted candles, on the apparatus.

Invisible laser radiation when open and interlock failed or d

efeated. Avoid direct exposure to beam.

To prevent fire or shock hazard, do not expose this appliance to rain or moisture.

NOTE:

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications

could void the user's

authority to operate the equipment.

IMPORTANT FOR LASER PRODUCTS

REPRODUCTION OF LABELS

1. CLASSIFICATION LABEL, PLACED ON REAR ENCLOSURE

2. WARNING LABEL, PLACED INSIDE THE UNIT

CAUTION:

Do not open the unit. There are no user serviceable parts inside the unit; consult all servicing to

qualified service personnel.

Discs for Playback

This system can playback all digital audio CD

/MP3

, finalized digital audio CD-Recordable (CD-R) discs and

E-

finalized digital audio CD

Rewritable (CD

RW) discs. This

system can playback CD

DA format digital audio CD,

finalised digital audio CD

R discs and finalised digital audio CD

RW discs.

POWER SOURCE

This unit is designed to be operated on AC.

Plug the power cord into standard household AC wall outlet. For dual voltage version, make sure that the AC

VOLTAGE SELECTOR is switched to your local voltage(optional).

BASIC FUNCTION

SWITCHING ON THE UNIT

Note: Before switching on the unit, Please make sure that all connections have been got ready.

Press the POWER ON

OFF

button, the LCD display will illuminate

and show

HELLO

moving

Press FUNCTION

switch to select playing mode (CD/TUNER/TAPE).

TO ADJUST VOLUME

Press and/or hold

the

electronic

VOLUME

UP/DOWN

CONTROL to increase or decrease volume.

Press MUTE button on remot

e control to switch off the sound. Press again to turn on.

HEADPHONES

For private listening, plug the headphones/earphones (not included) into PHONES jack

(3.5 mm diameter).

CAUTION:

Long time listening with headphones/earphones at high volume may cause ha

rmful

damage to users ears.

USING THE RADIO

TUNING IN RADIO STATIONS

Press

the FUNCTION switch to

select

RADIO

mode, the display will show

TUNER

Press

the BAND switch to select the desired wave band: AM

(MW)/

FM ST..

Tune to

des

ired station

press

ing the TUNING

CONTROL/CD SKIP UP/DOWN CONTROL, the display will

show the band frequency

Example:

FM 97.10

MHz

Adjust

the ELECTRONIC

VOLUME CONTROL to desired volume level.

Extend ANTENNA WIRE to its full length if you are listening to FM broadcasting. Gently rock the unit back

and forth to get the best reception when you are listening to AM programme, or place the unit in an open

location.

Note:

hen you are receiving FM stereo programme

, the display will show

(

)).

Turn off the radio, press the FUNCTION switch to enter CD or TAPE operation, or switch off the unit by

pressing POWER ON/OFF button (the display will say

GOOD BYE

to you).

AUTO SCAN(SEARCH) RADIO PROGRAMME

Press and hold the

TUNING

CONTROL/CD SKIP UP/DOWN CONTROL for 1 or 2 seconds and release, the

unit will auto scan until searched a strong signal programme. Press and hold again to search other stations.

USING THE CASSETTE

Note:

Before starting to operate cassette, remember to flip over the cassette cover which hides all cassette

keys in front panel.

UNDERSTANDING THE BUTTONS

RECORD

Press to record from the radio or CD player.

PLAY

Press to play cassettes.

REWIND

From stop mode, press to rewind the tape toward the beginning.

F.FWD

From stop mode, press to advance the ta

pe toward the end.

STOP/EJ.

- Press to stop current tape activity or to open the cassette compartment door when no

buttons are active.

PAUSE

- Press to interrupt tape play or record mode. Press the second time to resume tape play or tape

record m

ode.

PLAYING A CASSETTE TAPE

E-

Press

the FUNCTION switch to

select

TAPE

, the display will show

TAPE

Flip over the cassette cover and p

ress STOP/EJ. key to open the cassette compartment door.

3. Insert cassette tape into the compartment with th

e open edge facing down and the full reel on the left.

4. Close the door securely.

5. Press REWIND or F.FWD to move tape to the desired starting point.

6. Press PLAY key to begin playing the tape.

7. Adjust the volume to your desired listening level.

AUTOMATIC STOP FEATURE

When the cassette deck is operating in play or record mode and the end of the tape is reached, the unit

automatically shuts itself off and returns all buttons to the off position.

RECORDING FROM THE RADIO

Load a cassette tape into th

e tape deck and close the door.

Tune in to desired station by

press

ing the TUNING

CONTROL/CD SKIP UP/DOWN CONTROL

Depress RECORD key to begin recording. RECORD key and PLAY key are engaged simultaneously.

Press STOP/EJ. key to end recording.

To hear what

you recorded, press the REWIND key to start recording point, follow instructions in PLAYING A

CASSETTE TAPE.

NOTE:

PAUSE FOR A MOMENT - Using the PAUSE key on the cassette deck instead of the STOP/EJ. key to

momentarily interrupt recording gives you a much clear recording.

RADIO RECORDING TIPS

To temporarily pause the recording, press PAUSE key on the cassette deck. Press PAUSE key again to resume

recording.

RECORDING FROM CD/MP3

Insert a blank cassette tape into the tape deck.

Press

the FUNCTION switch to

select CD/MP3 playing mode

Open the disc compartment and l

oad a disc and select the desired track you want to record.

Press CD PLAY/PAUSE button to start CD playback. Press RECORD key and the PLAY key will

automatically engage to begin recording.

Press P

AUSE key to interrupt or edit recording. Press it again to resume recording.

Press STOP/EJ. key to end recording.

To hear what you recorded, press the REWIND key to start recording point, follow instructions in PLAYING A

CASSETTE TAPE.

AUTOMATIC LEVEL CON

TROL (ALC)

This unit has the latest circuitry-Auto Level Control (ALC), While recording, adjusting the VOLUME control will

not affect the recording volume, it keeps in a right and flat volume.

USING THE CD/MP3

LOADING A DISC

Press

the FUNCTION switch to

elect CD/MP3 playing mode

Open the CD door.

Place an audio CD

/MP3

into the tray with the label side facing up.

Close the CD door.

The display will show

CD READ

, then the total number of tracks and playing time will appear in the

display after 5 se

conds

Example :

47: 12

To remove the CD, press OPEN to open CD compartment lid, the display will show

OPEN

. Grasp the CD

by its edges, and carefully take it out.

Note:

To ensure good system performance; wait until the disc tray completely reads

the disc before proceeding.

If no disc loaded into the compartment, or the disc is unreadable, the display will show

no disc.

E-

PLAYING A DISC

Press PLAY/PAUSE button to start playback.

The playback starts from track 1, PLAY appears in the display.

To interrupt playback, press PLAY/PAUSE button. The elapsed time will flash on and off in the

display

Example:

00:57

flashes on and off.

To resume playback, press PLAY/PAUSE button again.

To stop playback, press STOP button,

the to

tal number of tracks

and playing

time

will appear in the display

SELECTING A DESIRED TRACK/PASSAGE

To select a desired track

Press TUNING CONTROL/CD SKIP UP/DOWN CONTROL button repeatedly in stop mode or during

playing until the desired track appears on the display.

Press PLAY/PAUSE but

ton to start play.

To search for a particular passage during playback( track scanning at high speed)

Press and hold TUNING

CONTROL/CD SKIP UP/DOWN CONTROL

button to scan the current playing track at

high speed until desired point(passage), then release the

button.

Playback will start again from this point.

PROGRAM TRACKS

Program tracks of disc are possible when playback is stopped. Up to 30 tracks can be stored in the memory in

any order.

1. In stop mode, press

MEMORY

button to enter program setting, the d

isplay

will show

00 P

2. Press TUNING CONTROL/CD SKIP UP/DOWN CONTROL to select the first desired track to be

programmed. (example: track 6)

3. Press

MEMORY

button to enter. The display

changes to

show

00 P

4. Repeat steps 2 & 3 to store

other desired tracks until all tracks programmed.

5. Press PLAY/PAUSE button to start playback from the first programmed track. The display will show 06

00:01.

6. Press STOP button to stop program playback.

To Erase the Memory(Program)

To clear the prog

ram, you may have two ways:

Press STOP button when the disc stopped, or

Open the CD compartment lid, program will be erased.

REPEAT

You can play one track or all tracks on the disc repeatedly.

To Repeat a Single Track

Press REPEAT button once in play, " R

EPEAT

" appears in upper left corner of the display. The current

track will be played over and over again till you press STOP button.

To cancel repeat play, press REPEAT button twice. "

REPEAT

" goes off from display.

To repeat all the Tracks

Press REPEAT button twice in play, "REPEAT ALL" shows in the display, all tracks on the disc will be

played over and over again till you press STOP button.

To cancel repeat play, press REPEAT button once. "

REPEAT

" goes off from display.

Note: Repeat function als

o can be done in stop mode.

RANDOM PLAY

Press RANDOM button in stop mode, the unit will start playback automatically in random order.

40 Seconds ESP (Electronic Shock Protection) System

This unit has a built-in 40 seconds shock protection system to prevent sound skipping and distorting when the

unit is shocked and rocked to vibrate. Press ESP button to activate this function. Press again to cancel.

E-

Note: The ESP button has combined another function Title and subtitle displaying. To view the title and/or

subtitle of a song, press and hold the ESP button for 1 or 2 seconds.

REMOTE HANDSET

LOADING THE BATTERIES INTO THE REMOTE HANDSET

Open the battery compartment cover.

Insert two

batteries (not included) as indicated inside the battery compartment.

ose the cover.

REMOTE CONTROL OPERATION

To operate the unit with the remote control, point the remote handset at the remote sensor on the front panel

and press the appropriate button on the remote handset.

The remote works best within a range of 6 ~ 7 met

ers from the front panel and on an angle of 30 degrees. Bright

sunlight or room light conditions can interfere with the remote control. If the remote operation is unsatisfactory or

stops working entirely, first try replacing the remote batteries, then try

reducing the room lighting conditions.

SPEAKER CONNECTION

Connect each speaker to the corresponding speaker terminals on the back

panel of the main unit. Make sure that the left speaker is connected to the

left pair of speaker terminals and the right speaker to the right pair of

speaker terminals. Also make sure that the speaker wires are correctly

connected: that the red wires are connected to the red terminals and the

black wires to the black terminals.

GENERAL INFORMATION

MAINTENANCE

Types of C

assette

Use only good quality cassettes (IEC TYPE 1) for making recordings. May be used to replay other types of

cassette but is unable to make proper recordings on these more specialized tapes.

The use of C120 cassettes is NOT recommended in this machine.

Protecting Recording

Normally, anything recorded on the tape is automatically erased when new recording is made. It is

possible

to protect your recording from accidental erasure by removing the tabs found on the rear of the cassette.

When the cassette is held with the recorded side uppermost and exposed tape facing the front, the

protective tab will be found on the left rear of the cassette.

All prerecorded cassette are protected in this way to prevent accidental erasure of the commercial recording.

"Prote

cted" cassette will prevent the record button from being operated.

Cleaning discs

When a disc becomes dirty, clean it with a cleaning cloth, wipe the disc from the center out. Do not wipe in

circular motion.

Do not use solvents such as benzene, thinner commercially available cleaners, or antistatic spray intended

for analogue records.

Cleaning the disc lens

E-

After prolonged use, dirt or dust may accumulate at the disc lens. To ensure good playback quality, clean the

disc lens with CD lens cleaner or any commercially available cleaner: Follow the instructions supplied with

cleaner.

Cleaning the heads and tape path

To ensure good recording and playback quality, clean the heads, the capstan(s) and pressure roller(s) after

every 50 hours of tape operation.

e a cotton swab slight moistened with cleaning fluid or alcohol.

Demagnetizing the heads

Use a demagnetizing tape available at your dealer.

SPECIFICATIONS

GENERAL

Power Requirement ................................................................AC110 /

220V (Selectable) or

120/ 220V (Selectable) or

120 / 230V (Selectable) or

127 / 220V (Selectable) or

110V or 220V or 230V or 240V

(YOUR EXACT AC POWER CAN

CHECKED FROM THE BACK

PLATE

OF UNIT)

Remote Handset

...............................................

.................... . 3V UM-

3 size x 2

Power consumption ................................................................... .

AC 18 Watts

Weight....................................................................................... ..

Approx. 2.5 kg

Dimensions...................................................................

Approx.306mm(W)x245mm(H)x 155mm(D)

Operation temperature..............................................................

+5 o C - +35 o C

RECEIVER SECTION

Receiving B

ands.......................................................................

AM/FM

Tuning Range ........................................................ AM 530 - 1600 KHz

FM 88 - 108 MHz

COMPACT DISC SECTION

Optical Pickup.............

...............................................................

Beam Laser

Frequency Response.................................................................

100Hz

- 16KH z

CASSETTE SECTION

Recording System.................................

................................... ,

2 Tracks 2 Channel

(Stereo)

Biasing System......................................................................... .

DC bias

Frequency Response ............................................................... . 1

6.3 K H z

WowAnd Flutter ......................................................................

0.35% WRMS (JIS)

AUDIO SECTION

Power output .......

......................................................................

Maximum

5 Watts x 2

Speaker Impedance...................................................................

4 Ohm x 2

Headphone Impedance .............................................

................

4 ~ 32 Ohms

ACCESSORIES

Instruction Booklet......................................................................

Specifications are subject to change for continuous improvement, we reserve the rights to modification without

rior notice.

Andere Handbücher für MC-129 MP3 RDS

Inhaltsverzeichnis

Andere LENCO Lautsprechersystem Handbücher

Beliebte Lautsprechersystem Handbücher anderer Marken

JVC

JVC CA-MXK5R Bedienungsanleitung

LG NB4532B Bedienungsanleitung

JVC

JVC CA-FSH100 Bedienungsanleitung

5Core

5Core Pro Series Bedienungsanleitung

EAW

EAW MQV1394e Bedienungsanleitung

Lynx

Lynx GXR-LA10A Bedienungsanleitung

iLive

iLive ITB066B Bedienungsanleitung

RDX

RDX QuickStation 4 Bedienungsanleitung

Electro-Voice

Electro-Voice S-122 Bedienungsanleitung

Sven

Sven SPS-619 GOLD Bedienungsanleitung

Pioneer

Pioneer CS-7070 Bedienungsanleitung

EAW

EAW UB82e Bedienungsanleitung

Sondpex

Sondpex Active Speaker System and Digital Music... Bedienungsanleitung

JVC

JVC NX-PN7 Bedienungsanleitung

Yamaha

Yamaha NX-A01 - Speaker Sys Bedienungsanleitung

SE Audiotechnik

SE Audiotechnik I-LINE Bedienungsanleitung

Gemini

Gemini WRX-843 Series Bedienungsanleitung

TCL

TCL 6100 Series Bedienungsanleitung