Lenovo C51 Bedienungsanleitung

E-1

EDERAL

OMMUNICATIONS

OMMISSION

(FCC) W

ARNING

Instruction to Users

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant

to part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful in-

terference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation.

If this equipment does cause harmful interference to

radio and television reception, which can be

determined by turning the equipment off and on, the

user is encouraged to try to correct the interference

by one or more of the following measures.

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment

and the receiver.

- Connect the equipment into an outlet on a cir-

cuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/ TV

technician for help.

This equipment has been certified to comply with the

limits for a Class B computing device, pursuant to

part 15 of the FCC rules. Only peripherals (computer

input / output devices, terminals, printers etc.) certified

to comply to the Class B limits may be attached to

this computer. Operation with non-certified

peripherals is likely to result in interference to radio

and TV reception.

Remarks

TomeetFCCrequirement,shieldedcablesarerequired

to connect the device to a personal computer or other

Class B certified device.

Information to Users

Any change or modifications expressly approved by

the party responsible for compliance could void the

user's authority to operate this equipment.

DOC

OTICE

This product conforms to Canadian Class B emissions

regulations.

Ce produit est conforme aux réglements d’émission

Canadienne class B.

E-2

POWER SAVING

The monitor will be driven to different power saving

states upon receiving

control signals from the

display controller, this meets the EPA

(

Environment Protection Agency) Energy Star

requirements and reduces power consumption.

The monitor will work in the following 4 states

according to the VESA standard Display Power

Management Signal:

The power saving states will be kept until a control

signal has been detected or the keyboard or mouse is

activated. The recovery time from STANDBY/

SUSPEND state to ON state shall be within 3 seconds.

It will take about less than 15 seconds from OFF state

back to ON state.

INTRODUCTION

This microprocessor-based, digital control 15” color

monitor is a high performance and easy to use product.

It employs the latest on-screen-menu technology. The

microprocessor capability offers 12 most commonly

used VESA timing modes preset in the factory, and 6

modes for user to adjust to the special timings that

user might have.

We hope that you will find this manual is helpful in

obtaining the fullest use of your monitor, and in

ensuring your personal safety during operation.

INSTALL THE

MONITOR

• To connect the tilt/swivel base to the monitor, align

hooks with the sockets on bottom side of the

monitor, and gently push the base towards the front

of the monitor.

• The 15-pin D-shell signal connector on the signal

cable will connect easily to the video adapter

output on your personal computer. Lock both

screws on the connector to ensure a firm

connection.

• Turn the PC power switch ON. Then turn the

monitor power switch ON, by pressing the switch

inward. The green power indicator will light up.

• Allow about 30 seconds for the CRT tube to warm

up. Data will be displayed on the screen.

• If your display fails to function properly, please

first refer to the section "Troubleshooting" in this

manual.

etatS rewoP noitpmusnoC DEL thgiL

NOlamroNneerG

YBDNATSW51<wolleY

DNEPSUSW51<wolleY

FFOW8<rebmA

E-3

USER CONTROLS AND INDICATORS

1. Press " " button to select control parameters in

sequence as belows

Sequence 1 Contrast

Sequence 2 Brightness

Sequence 3 Horizontal Size

Sequence 4 Horizontal Position

Sequence 5 Vertical Size

Sequence 6 Vertical Centering

Sequence 7 Pincushion/Barrel

Sequence 8 Trapezoid

Then repeat from sequence 1.

Keeping on pressing button continually, the

sequence will repeat automatically.

2. Push “+” or “-” button to adjust the value of the

selected function. When the control value reach

the maximum value (either positive or negative)

the LED will flash, indicating that no more

adjustment value is possible.

RECALL SELECT DEG

3. The “Recall” function is activated by pressing “+”

and “-” buttons at the same time.

4. The manual “Degaussing” function enables user

to clear the picture impurity caused by monitor

position/ orientation change.

When adjustments have been done, all data will be

stored into system memory immediately.

E-4

TROUBLESHOOTING

If your monitor fails to operate functionally, it may

be possible to correct the problem by making simple

checks as follows:

Refer to the operation instructions for your computer/

video adapter to ensure that you have the correct signal

output source for the monitor. Ensure that the switches

on the video adapter are set correctly for operation

with this monitor.

If the above steps fail to correct the problem contact

your dealer for servicing by qualified service

personnel.

Please remember that the monitor should be returned

for servicing together with the power cord.

* Note: You can easily distinguish the problem is on

the monitor or on the computer by using the

monitor’s built-in selftest function.

With the monitor power ON, disconnect the

signalcablefrommonitor.Ifthereisnoimage

on the monitor screen, disconnect the signal

cable. If a full-white image is diaplayed on

the screen, the monitor is function properly,

and the problem is at PC side, or signal cable.

SERVICING

Refer all servicing to qualified service personnel.

Serious shock hazards exist within the covers of

this monitor.

Do not open the covers under any circumstances-

there are no serviceable parts inside.

*Note: This pin is used for self test detection; at

PC side, this pin has to be connected to

ground.

SIGNAL CONNECTOR

INFORMATION

melborPtsujdA&kcehC

neercsknalB

).eton*( ,hctiwsrewoprotinoM

,elbaclangis,drocrewop

rotcennocro

hctiwsrewopCP

tsartnoc&ssenthgirB

slortnoc

noitisopyalpsiD

retnec-ffo &gniretneclacitreV

slortnocesahplatnoziroh

llamsootyalpsiD

egralootro ezislatnoziroh&lacitreV

slortnoc

thgirbootyalpsiD

midootro tsartnoc&ssenthgirB

slortnoc

niPnoitcnuFniPnoitcnuF

1langisdeR9CN

2langisneerG01dnuorglatigiD

3langiseulB11dnuorG

4dnuorG21)B2CDD/1CDD(ADS

5* 31 latnoziroH noitazinorhcnyS

6nruterdeR41 noitazinorhcnyslacitreV)1CDD(KLCV&

neerG

nruter 51)B2CDD(LCS

8nrutereulB

E-5

* Specifications are subject to change without notice.

TECHNICAL SPECIFICATIONS

eziSneercS

lanogaidlausiv"51 ezisneercselbaweiV "8.31 gnitaoCeralG-itnA

tnerruC gnitaR A4.1

hctiPtoDmm82.0 rewoP

noitpmusnoC ).XAM(W08

aerAyalpsiD

)WxH( ,)mm(262x691

lacipyt noisnemiD X083X5.573

)mm(883

sroloCyalpsiDetinifnIthgieWgk2.21

.xaM

noituloseR 867xstoD4201

seniL gnitarepO

erutarepmeT C53otC01

ytilibitapmoC

sedomcihpargllA

latnozirohhtiw

neewtebseicneuqerf

zHK45otzHK03

egarotS

erutarepmeT C56otC0

noitazinorhcnyS

:latnoziroH

:lacitreV zHK45ot03

zH021ot05 ytidimuH %08ot%02

)gnisnednoc-non(

langiStupnI golanABGRoediV

etarapeSLTT.cnyS edutitlAtf0007otpU

elbaClangiS bus-Dnip-51

rotcennoc IIRPM

,01:0991RPM

noitaidaRwoL

ylnoledom

)lanoitpO(

tupnIrewoP

egatloV

ycneuqerF CAV042ot001

zH06-05

E-6

PRESET MODES

edoM noituloseR )VxH( .qerF.H )zHK( .qerF.V )zH( edoM noituloseR )VxH( .qerF.H )zHK( .qerF.V )zH(

1053x0274.13077 006x0088.7306

2004x0274.13078 084x0463.3458

3084x0464.13069 006x0088.6457

4006x0081.536501006x0080.8427

5084x0465.735711867x42013.8406

6084x0468.732721006x0086.3558

Inhaltsverzeichnis

Andere Lenovo Monitor Handbücher

Lenovo

Lenovo D22-17 Bedienungsanleitung

Lenovo

Lenovo L215P Bedienungsanleitung

Lenovo

Lenovo 6135-AB2 Bedienungsanleitung

Lenovo

Lenovo Y27q-20 Bedienungsanleitung

Lenovo

Lenovo L32P-30 Gebrauchsanweisung

Lenovo

Lenovo ThinkVision T27q-20 Bedienungsanleitung

Lenovo

Lenovo 61C1RAR2US Bedienungsanleitung

Lenovo

Lenovo D19-10 Gebrauchsanweisung

Lenovo

Lenovo ThinkVision LT1952p Wide Bedienungsanleitung

Lenovo

Lenovo 9419HB2 Bedienungsanleitung

Lenovo

Lenovo Q24h-10 Gebrauchsanweisung

Lenovo

Lenovo T2454p Bedienungsanleitung

Lenovo

Lenovo ThinkVision LT2452p Wide Bedienungsanleitung

Lenovo

Lenovo SPECTRUM Series Bedienungsanleitung

Lenovo

Lenovo R27q-30 Bedienungsanleitung

Lenovo

Lenovo Think Vision LT2013p Bedienungsanleitung

Lenovo

Lenovo ThinkVision L195 Bedienungsanleitung

Lenovo

Lenovo ThinkVision L193p Bedienungsanleitung

Lenovo

Lenovo D27-45 Bedienungsanleitung

Lenovo

Lenovo Legion Y27g Bedienungsanleitung

Lenovo

Lenovo L24e-20 Bedienungsanleitung

Lenovo

Lenovo L24i-40 Bedienungsanleitung

Lenovo

Lenovo G27e-20 Bedienungsanleitung

Lenovo

Lenovo L24-28 Gebrauchsanweisung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung