Lenze E82ZAFCC210 Bedienungsanleitung

Montageanleitung

Mounting Instructions

Instructions de montage

EDK82ZAFCC-210

.ñP^

Ä.'P^ä

CAN-I/O PT



E82ZAFCC210

Funktionsmodul

Function module

Module de fonction

EDK82ZAFCC-210 DE/EN/FR 2.0

30 

legende_kopfzeile-TIP_download

Legend for fold-out page See

Function module E82ZAFCC210

DIP switch for

znode address

zBaud rate

QT

Plug connector X3.1, connection for CAN bus

QO

Plug connector X3.2, connection for digital inputs

Plug connector X3.3, connection for

zController inhibit (CINH)

zController inhibit internal supply

Nameplate PN

Tip!

Current documentation and software updates for Lenze products can be found

on the Internet in the ”Downloads” area under

http://www.Lenze.com

EDK82ZAFCC-210 DE/EN/FR 2.0 31



-M5-einsetzbarkeitAFCC210

Validity

These Instructions are valid for

ƒ Function modules E82ZAFCC210, CAN-I/O PT, as of version 3A

These Instructions are only valid together with the Operating Instructions for the basic

devices permitted for the application.

Identification

E82AF000P0B201XX



APPLICATION

010 / 3A22



A22A22

APPLICATION

010 / 3A22



Type

Id.-No.

Prod.-No.

Ser.-No.

E82ZAFX005

c d e

E82ZAF C C 210 3A

Series

CAN

Generation

Variant 210: PT version

Hardware version

Software version

Function

The function module connects the basic device to the serial communication system CAN

(Controller Area Network).

Application range

The function module E82ZAFCC210 (CAN I/O PT) can be used

with the following basic devices

As of version

Frequency inverter 8200 vector Vx21

iContents

EDK82ZAFCC-210 DE/EN/FR 2.0

32 

Inhalt

1 Safety instructions 33.................................................

Definition of notes used 33.............................................

Residual hazards 34...................................................

2 Scope of supply 35....................................................

3 Mechanical installation 36.............................................

4 Electrical installation 37...............................................

Wiring to a host 37....................................................

Wiring according to EMC 38............................................

Connection terminals 39..............................................

Terminal assignment 41...............................................

Bus cable length 43...................................................

5 Commissioning 46....................................................

Before switching on 46................................................

Baud rate and node address (node ID) setting 47...........................

Address 48...........................................................

Baud rate 49.........................................................

Initial switch-on 50...................................................

Basic identifiers of the CAN objects 52...................................

6 Technical data 53.....................................................

General data and operating conditions 53.................................

Protective insulation 54...............................................

Dimensions 55.......................................................

Safety instructions

Definition of notes used

EDK82ZAFCC-210 DE/EN/FR 2.0 33



H1sic_EN-restgef

1 Safety instru ctions

Definition of notes used

The following pictographs and signal words are used in this documentation to indicate

dangers and important information:

Safety instructions

Structure of safety instructions:

Danger!

(characterises the type and severity of danger)

Note

(describes the danger and gives information about how to prevent dangerous

situations)

Pictograph and signal word Meaning

Danger!

Danger of personal injury through dangerous electrical voltage.

Reference to an imminent danger that may result in death or

serious personal injury if the corresponding measures are not

taken.

Danger!

Danger of personal injury through a general source of danger.

Reference to an imminent danger that may result in death or

serious personal injury if the corresponding measures are not

taken.

Stop!

Danger of property damage.

Reference to a possible danger that may result in property

damage if the corresponding measures are not taken.

Application notes

Pictograph and signal word Meaning

Note! Important note to ensure troublefree operation

Tip! Useful tip for simple handling

Reference to another documentation

1 Safety instructions

Residual hazards

EDK82ZAFCC-210 DE/EN/FR 2.0

34 

H1sic_EN-restgef

Residual hazards

Danger!

Observe the safety instructions and residual hazards included in the

Instructions for the basic device.

Scope of supply 2

EDK82ZAFCC-210 DE/EN/FR 2.0 35



H1_LIF-Liefumfg

2 Scope of supply









E82ZAFC300B/AFX007,016-019

Pos. Item Info

Function module E82ZAFCC210

Mounting Instructions

Terminal strip with double screw connection, 3-pole For connection see 42

Terminal strip with spring connection, 2-pole

Terminal strip with spring connection, 4-pole

Mounting clip For usage see operating

instructions/mounting

instructions for

8200 vector

Two bus terminating resistors (120 Ωeach) 38

3Mechanical installation

EDK82ZAFCC-210 DE/EN/FR 2.0

36 

H1_MechINS-MechInst

3 Mechanical installation

Please see the Mounting Instructions for the basic device for the mechanical installation of

the function module.

The Mounting Instructions for the basic device

ƒ are part of the scope of supply and are enclosed with each device.

ƒ provide tips for avoiding damage through improper handling.

ƒ describe the obligatory order of installation steps.

Electrical installation

Wiring to a host

EDK82ZAFCC-210 DE/EN/FR 2.0 37



H1_E_INST-leitungsspez

4 Electricalinstallation

Wiring to a host

77GND

8200 vector 8200 vector SPS/PC

E82ZAFCCxxx E82ZAFCCxxx

120

LO LO LO

HI HI HI

+++

E82ZAFC013

Fig. 2 Basic structure

System bus cable specification

Total length ≤300 m ≤1000 m

Cabletype LIYCY2x2x0.5mm

(twisted in pairs with shield)

CYPIMF2x2x0.5mm

(twisted in pairs with shield)

Cable resistance ≤80 Ω/km ≤80 Ω/km

Capacitance per unit length ≤130 nF/km ≤60 nF/km

Connection Pair 1 (white/brown):

Pair 2 (green/yellow):

LOW and HIGH

GND

4Electrical installation

Wiring according to EMC

EDK82ZAFCC-210 DE/EN/FR 2.0

38 

H2_EMV_Verdraht-EMV

Wiring according to EMC

Please observe the following for wiring according to EMC guidelines:

Note!

ƒSeparate control cables from motor cables.

ƒConnect the shields of the control or data cables as follows:

ÓAt both ends for cables with digital signals.

ƒPotential differences between thenodescanbeavoidedbyusingan

equalizing conductor with a large cross-section (reference: PE).

ƒPlease observe the further notes concerning EMC-compliant wiring given

in the Instructions of the basic devices.

General wiring information

1. Do not change the bus topology, i.e. do not use stubs.

2. Connect the bus terminating resistors of 120 Ωeach (scope of supply):

zbetween CAN-LOW and CAN-HIGH

zonly to the physical beginning and end of the cable

3. Use bus cable according to the specification on 37.

4. Do not exceed the permissible bus cable length (see 43).

Inhaltsverzeichnis

Andere Lenze Steuereinheit Handbücher

Lenze

Lenze L-force Communication ModemCAN EMF2181IB Bedienungsanleitung

Lenze

Lenze L-force SM301 Bedienungsanleitung

Lenze

Lenze E94AYCDN Bedienungsanleitung

Lenze

Lenze 2173 Bedienungsanleitung

Lenze

Lenze EZAEDE1001 Bedienungsanleitung

Lenze

Lenze EMB934 Series Bedienungsanleitung

Lenze

Lenze E94AYFLF Bedienungsanleitung

Lenze

Lenze AC Tech MotionView OnBoard PositionServo... Bedienungsanleitung

Lenze

Lenze EDK94AZMAC Bedienungsanleitung

Lenze

Lenze SM302 Bedienungsanleitung

Lenze

Lenze E94AZMAC Bedienungsanleitung

Lenze

Lenze E82ZAFPC201 Gebrauchs- und Pflegehandbuch

Lenze

Lenze 8250 Series Bedienungsanleitung

Lenze

Lenze E84AYCEC Gebrauchs- und Pflegehandbuch

Lenze

Lenze L-force Communication LECOM-B Bedienungsanleitung

Lenze

Lenze E84DGFCG Series Gebrauchs- und Pflegehandbuch

Lenze

Lenze 2130IB Series Bedienungsanleitung

Lenze

Lenze L-force CANopen EMF2178IB Gebrauchs- und Pflegehandbuch

Lenze

Lenze E82ZAFSC Bedienungsanleitung

Lenze

Lenze EPM-H312 Bedienungsanleitung

Lenze

Lenze L-force E94AYCEN Bedienungsanleitung

Lenze

Lenze i5CA Series Bedienungsanleitung

Lenze

Lenze 2131 Bedienungsanleitung

Lenze

Lenze ETC Series Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung