LevelOne FGP-1031 Bedienungsanleitung

FGP-1031

Gigabit Switch Manual

Package Contents

•

FGP-1031

•

User Manual

•

Power Cord

CE Marking Warning

CE marking is a certification mark that indicates conformity with health, safety, and

environmental protection standards for products sold within the European Economic Area

(EEA).The CE marking is also found on products sold outside the EEA that have been

manufactured to EEA standards. This makes the CE marking recognizable worldwide even to

people who are not familiar with the European Economic Area.

WEEE

WEEE is waste electrical and electronic equipment. It is end-of-life electrical and electronic

equipment and covers virtually everything with a plug or battery. ... The EC introduced the

WEEEDirectivein2002to addresstheenvironmentalimpactsofunwanted electricaland

electronicequipmentat end-of-lifedisposal.

FCC Certifications

This Equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be required to correct

the interference at his own expense.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference, and (2) this device must

accept any interference received; including interference that may cause undesired

operation.

Features

Overview

Product Display

◆

PoE Standard:

Flow control method:full duplex adopts IEEE 802.3x ,half duplex adopts Back pressure.

Port supports Auto MDI/MDIX.

supports lightning protection(secondary level requirements).

Single port supports PoE power:30W(first port outputs

Exchanging Mechanism: Store and forward.

All ports support exchange at wirespeed.

Zero-configuration:automatically supply for adaptive devices.

Panel indicator monitors operating status and helps fault analysis.

IEEE802.3af/at PoE++/HiPoE, support all ports standard detection.

Support power supply for PoE devices such as AP and network monitoring cameras connected by

Cat5/6 ethernet cables.

Port

HiPoE_60W).

◆

Automatically detecting and supplying power for powered devices conformed to IEEEE

802.3af/at PoE++/HiPoE, unmanaged PoE switch supports first port output HiPoE_60W. It can

provide a convenient service for PoE network equipments like wireless access points(AP) and IPC

surveillance cameras.

Function Switch

Mark Mode Description

Standard Normal

Port Isolation

Super Mode

All ports communicate freely,adapting to common data transmission environment

Switch to VLAN mode;downlink isolating from each other,uploads and downloads data

through uplink;suppress network failure like broadcast storm and virus attack

Downlink speed limitation:10M(Ultral-far transmission:250 meters)

Indicator

Status

Always ON

Always OFF

Flashes

Port circuit or cunrrent over-loaded

Port Isolation LED：V

Super Mode LED：S

Port Isolation mode ON

Super mode ON

PoE LED

Orange

Green

Powered equipments connected and power supply narmally

No powered equipments connected or no power supply

Network signal communicated

Network signal not communicated

Indicator Description

Normal

Power Unconnected

Always ON

Always OFF

Always ON

Power LED:P

PoE L ink

8FE P oE+2G E UP8FE P oE+2G E UP

Hyb rid PoE S witchHyb ri d PoE S witch

123 4 9-UP 1 0-UP

567 8

100M PoE port 1000M Uplink Function switchIndicator

Figure1.2.1 three-pin power socket(Single-phase)

Check up the power cable securely wrapped and connected to the AC power adapter connector or not.

Ensure the adequate space for heat dissipation and ventilation around the switch.

Do not stack heavy objects on the switch.

Connection of the Power Cable

1. Check up that the power supply is consistent with the marked requirements on the switch or not ;

2. The built-in power adapter is not needed, and it can be directly connected to AC100~240V and

50~60Hz;see Fig.1.2.2.

Specification of power socket

The inspection after installation

Installation and attentions

Desktop

When installing the switch on the desktop, the device must be placed flat on the table to keep it stable.

Please leave aside enough space between the device and other surrounding objects for good ventilation.

For the safe installation operation of switch, suggestions are as follows:

The switch adopts single-phase three-pin power socket, the middle one is the G wire,

the left one is the N wire, and the right one is the L wire. Please check before operation.

Please check up the following items after installation:

1. Enough space around the switch for heat dissipation and smooth ventilation or not.

2. The s

3. The power supply, switch, frame and other equipments are properly grounded;

upplying power of the power socket conformed to the specification of the switch.

Fig 1.1.2 Power connection schematic diagram

PoE Link

8FE PoE+2GE UP8FE PoE+2GE UP

Hybrid PoE SwitchHybrid PoE Switch

123 4 9-UP 10 -UP

567 8

FGP-1031

8*10/100Base-TX PoE port（Data/Power）

2*10/100/1000Base-TX uplinkRJ45 port (Data)

1-8 port support PoE(first port supports output HiPoE_60W)

IEEE 802.3

IEEE 802.3i 10BASE-T

IEEE 802.3u100BASE-TX

IEEE 802.3x

IEEE 802.3ab1000BASE-T

IEEE 802.3af/at//PoE++

hasivo HiPoE

5.6Gbps

4.03Mpps

2.5M

10BASE-T ： Cat3,4,5 UTP(≤250 meter)

100BASE-TX ： Cat5 or later UTP(150 meter)

1000BASE-TX ： Cat6 or later UTP(150 meter)

MAX 120W （AC100-240V 50/60HZ）

210mm*150mm*35mm

270*mm220mm*68mm

0.8kg/1.2kg

Function

Single port power

Power Pin

Total Power/Input Voltage

Hybrid Gigabit PoE Switch

N:(Standard Normal)+V:(Port Isolation)+ S(Super Mode)(specific port refers to user manual)

10/100/1000BaseT（X）Auto

Default1/2(+),3/6(-);Optional 4/5(+),7/8(-)

Average15.4W;MAX 30W

Built-in power AC：100～240V 50-60Hz 1A

-10～+55°C；5%～90% RH Non coagulation

-40～+75°C；5%～95% RH Non coagulation

Desktop(optional wall+machine hanger parts)

3KV 8/20us；

Ip30

CE mark, commercial；CE/LVD ； FCC Part 15

Class B；RoHS；

Parameter

Model

Product

Port

Network Protocol

Port Specification

Transmission Mode

Bandwidth

Packet Forwarding

MAC Address

Buffer

Transmission

Distance

Watt

LED Indicator

Power

Operating Temperature/

Humidity

Storage Temperature/

Humidity

Product size

/Packing size

（L*W*H）

N.W/G.W(kg)

Installation

Lightning protection

level

Certificate

Store and Forward(full wirespeed)

Standby Power Consumption:≤5W

P:Power LED(Over-power LED)

Uplnik:(Green=10/100M LED+Orange=1000M LED)

V:(Port Isolation LED）

S:(Super ModLED)

Port:(Green=Link LED+Orange=PoE LED)

Andere Handbücher für FGP-1031

Inhaltsverzeichnis

Andere LevelOne Schalten Handbücher

LevelOne

LevelOne GTL-2881 Bedienungsanleitung

LevelOne

LevelOne GEP-0823 Bedienungsanleitung

LevelOne

LevelOne FSW-0803TX Bedienungsanleitung

LevelOne

LevelOne ProCon GSW-1291 Bedienungsanleitung

LevelOne

LevelOne GEL-2060 Kurzanleitung

LevelOne

LevelOne KVM-0221 Bedienungsanleitung

LevelOne

LevelOne GEL-1061 Bedienungsanleitung

LevelOne

LevelOne FEP-0812v4 Bedienungsanleitung

LevelOne

LevelOne Infinity IES-0510 Bedienungsanleitung

LevelOne

LevelOne GSW-4870TGX Bedienungsanleitung

LevelOne

LevelOne ViewCon KVM-0205 Bedienungsanleitung

LevelOne

LevelOne GEP-1022 Bedienungsanleitung

LevelOne

LevelOne GEL-2060 Kurzanleitung

LevelOne

LevelOne FEP-0311 Bedienungsanleitung

LevelOne

LevelOne GSW-2494 Bedienungsanleitung

LevelOne

LevelOne KVM-0306 Bedienungsanleitung

LevelOne

LevelOne IGP-0502 Bedienungsanleitung

LevelOne

LevelOne FEP-0800 Bedienungsanleitung

LevelOne

LevelOne KVM-0221 Bedienungsanleitung

LevelOne

LevelOne GTP-2871 Bedienungsanleitung

LevelOne

LevelOne FGP-1000 Bedienungsanleitung

LevelOne

LevelOne GEP - 5271 Bedienungsanleitung

LevelOne

LevelOne GTL-2890 Bedienungsanleitung

LevelOne

LevelOne ProCon GSW-4896 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung