LevelOne KCM-0832 Bedienungsanleitung

LevelOne

KCM-0832 / KCM-1632

8 / 16-Port KVM Module

Quick Installation Guide

PackageChecklist

KCM-0832 or KCM 1632

Quick Installation Guide

Introduction

Each Host port connectoris HDDB15 type. The 3-in-1 VGA cable has a HDDB15 male connectorat one end, plug it into PC

port of KVM switch back panel, and plug theother end’s connectors to PC VGA port, and if

■PS/2 Computers --- Connect PS/2 keyboard connectorto keyboard port, and PS/2 mouse connectorto mouse port.

■USB Computers --- connect PS/2-USB changerto PS/2 keyboard connector, then plug the changerinto available USB

port. This single USB port can communicate both keyboard and mouse signals. It works as a standard HID (Human

Interface Device), no extra driver needed.

■Note: the PS/2 mouse connectorshould be left disconnected.

HardwareInstallation

Before installation, please make sure all of peripherals and computers have been turned off.

Install ModularKVMSwitch

1. Push KVM switch into the rails from rear of cabinet.

2. Slide the unit into therack and secure it to the rack.

Install the Computer/Server on Host Side

Local Console --- Connect the keyboard, mouse and monitor to the local consoleports.

The recommended Power Up sequence is as follows: monitor, KVM Switch, finally the computers.

Hotkeys& OSD

The table blow lists all supported hotkey commands.

Command

Function

Space bar

Bring up the OSD overlay screen

↑or↓

Moving Up or Down

[1,2,..,8] bank,

[01, 02,..,32] port

■The first digit is bank number starting with “1”. The first KVM

switch unit on the Daisy chain line is of bank 1 (the Master). A

standalone KVM switch is fixed in bank 1.

■The second & third digits are port number starting with “01”

PgUp

Previous bank

PgDn

Next bank

To enable/disable beep sound function

To enable/disable theScreen Saving function and 10min

auto-logout function. This function is default OFF (Disable).

To enable Firmware upgrade function

To log out the OSD. If Security is enabled it will showup the Login

window waiting for username and password.If Security is disabled

it will showup the Status window

For SUPERVISOR to set the OSD back to factory default value

(except User Security settings).

For SUPERVISOR to activate the Auto-Scan function

For SUPERVISOR to enable/disable Security function. If the

Security is off, we don’t need user name & password to access to the

KVM system. This function is default OFF (Disable).

Example #1 –To bring up the OSD overlay window, press “Caps Lock”, “Caps Lock”, and the “Space Bar”. Immediately,

the OSD overlay screen will appear. The superimposed menu screen is generated by the KVM switch, and does not affect your

computers or software function in any way.

Example #2 –To switch to Bank 1 Port1, press “Caps Lock”, “Caps Lock”, and “1”, “0”, “1”.

Caps

Lock

Caps

Lock

Caps

Lock

Caps

Lock

Space Bar

please enter next key in

2 seconds in the

Hotkey sequence

please enter next key in

2 seconds in the

Hotkey sequence

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere LevelOne Schalten Handbücher

LevelOne

LevelOne GEU-0522 Bedienungsanleitung

LevelOne

LevelOne KVM-0223 Bedienungsanleitung

LevelOne

LevelOne ProCon GSW-4896 Bedienungsanleitung

LevelOne

LevelOne FEP-0800 Bedienungsanleitung

LevelOne

LevelOne FGP-1031 Bedienungsanleitung

LevelOne

LevelOne FSW-1640TX Bedienungsanleitung

LevelOne

LevelOne FEP-1601 Bedienungsanleitung

LevelOne

LevelOne GTL-2690 Bedienungsanleitung

LevelOne

LevelOne PLI-3211 Bedienungsanleitung

LevelOne

LevelOne FGP-1000 Bedienungsanleitung

LevelOne

LevelOne FSW-0803TX Bedienungsanleitung

LevelOne

LevelOne ProCon GSW-1290 Bedienungsanleitung

LevelOne

LevelOne GEP-0950 Bedienungsanleitung

LevelOne

LevelOne IFP-0503 Bedienungsanleitung

LevelOne

LevelOne GSW-2476 Bedienungsanleitung

LevelOne

LevelOne IGP-1061 Bedienungsanleitung

LevelOne

LevelOne GTL-2882 Bedienungsanleitung

LevelOne

LevelOne GTL-2881 Bedienungsanleitung

LevelOne

LevelOne Infinity IES-1085 Bedienungsanleitung

LevelOne

LevelOne INFINITY IES-0520 Bedienungsanleitung

LevelOne

LevelOne ProCon GSW-1291 Bedienungsanleitung

LevelOne

LevelOne FEP-0931 Bedienungsanleitung

LevelOne

LevelOne FSW-0508TX Bedienungsanleitung

LevelOne

LevelOne GEP-0950 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung