LevelOne KVM-0306 Bedienungsanleitung

LevelOne

KVM-0306

3-Port DVI KVM Switch

with Audio

User Manual

Bedienerhandbuch

Version 1.0-0605

ENGLISH

1. Introduction

Thank you for purchasing LevelOne KVM-0306. You now have a high quality,

durable system that will enable you to control 3 host computers and/or servers by

using PS/2 and/or USB Connectors from one console (PS/2 & USB Mouse, PS/2 &

USB Keyboard, and Monitor).

1.1 Features

1. Console your Keyboard/Mouse via either way of PS/2 and/or USB arbitrarily.

2. Controls 3 DVI computers from a single console (Keyboard/Mouse) over USB

and/or PS/2 connections.

3. Speaker enabled.

4. Microphone enabled.

5. Supports Windows, Linux, Mac OS9/OSX, Sun Microsystems.

6. Emulates a keyboard on each PC to allow your computers to boot normally

without keyboard error.

7. Supports hot-swap. All devices connected to the KVM can be added or

removed at any time, without shutting the unit down.

8. Supports 2 types of switching: (1) Hardware Push Button, (2) Hot-Keys on

PS/2 and/or USB keyboard.

9. Supports Auto-Scan function to switch video automatically among computers in

preset intervals sequentially.

10. Supports LED display for PC status monitoring.

11. Supports DVI UXGA resolutions up to 1600 x 1200 @ 60HZ.

12. Supports Beeper during switching enabled.

13. Self powered through USB connection.

14. Fully compliant with the USB 1.1/ 2.0 specification.

1.2 Physical Diagram

1.3 Package Contents

The product you purchased should contain the following equipment and accessories:

1. KVM-0306

2. User Manual

3. Three sets of cables (DVI + USB/Audio)

Selected LED On-Line LED Push Button

Microphone / Speaker DVI Port USB Connector

Reset

2. Specifications

2.1 General: Specification

Number Of Computers Controlled 3

Selection Method Push Button and Hot-Key (PS/2 and/or USB Keyboar

LEDs Red for PC Selection

Green for PC Power On

Video 3 x DVI UXGA female

USB 3 x USB - B type female

Speaker 3 x audio female jack

PC Connectors

Microphone 3 x audio female jack

Keyboard 1 x 6 pin mini-DIN female

Mouse 1 x 6 pin mini-DIN female

Video 1 x DVI UXGA female

Keyboard 1 x USB - A type female

Mouse 1 x USB - A type female

Speaker 1 x audio female jack

Console Ports

Microphone 1 x audio female jack

Auto-Scan Interval From 5 to 250 Seconds

DDC, DDC2 DVI UXGA monitor Up to resolution: 1600 x 1200

Hot Swappable Yes

Operating systems supported Windows 98SE/ME/2000/XP/2003 Server, Linux

Mac OS9/OSX and Sun Microsystems

Device driver No Need

Power By PS/2 and/or USB

Cable Length 6 feet (1.80 Meter)

Dimensions (L X W X H) 21.5 x 8.8 x 4.5 cm (5.5 X 3 X 1.7 inches)

Unit Weight 650 g

Housing material Metal

Operating Temperature 32~ 122°F (0~ 50°C )

Humidity 0%~80%RH

2.2 LED indicator:

Selected : RED LED indicates that the KVM Switch is selected to the corresponding

PC.

On-Line : GREEN LED indicates that the PC on corresponding port is connected

and powered on.

3. Installing KVM-0306

3.1 System Requirements:

1.Console

DVI monitor capable of the highest resolution.

PS/2 and/or USB Keyboard/Mouse

2.Computer or Server

The following equipment must be equipped with each computer or server.

- Type A USB port.

- DVI connector.

3.Cables

KVM-0306 uses separate (DVI + USB/Audio) cables.

3.2 Hardware Installation:

1. Make sure that the USB port of host PC is enabled and working properly.

2. Connect the USB cable Type-A end to the USB port of host PC, and the USB

cable Type-B end to the any available upstream on KVM-0306.

3. Connect the DVI male-to-female cable between the DVI port of host PC and DVI

port that corresponds to the USB port you selected in step 2.

4. Repeat steps 1-3 for any other computers you are connecting up and up to 3

computers can be connected at the same time.

Precaution:

1. The KVM switch does not support the USB keyboard which has built-in USB

HUB.

2. If your keyboard and mouse connected on KVM-0306 could not work at the

Windows login screen, it may be caused because the HID driver has not been

installed, please follow these steps to solve this problem:

a. Shut down the host PC.

b. Connect keyboard to the PS/2 port on host PC and turn on the PC.

c. Log in Windows system, and it will install the HID driver.

d. You can remove the keyboard and KVM-0306 should work properly.

4. Operating KVM-0306

KVM-0306 has the ability to switch the keyboard, video, mouse simultaneously. It

supports 2 methods to switch between computers: hardware push button and

Hot-Key commands.

Note: When using the two-step Hot Key sequences, the keys must be pressed within

5 seconds; otherwise the Hot Key action will be terminated.

4.1 Manual switch by push button:

You can switch to any other available active USB host connection by simply push the

appropriate switch button on KVM-0306. The LED will be lit to indicate which port is

currently selected.

4.2 Hotkey Selection (USB and/or PS/2 keyboard)

4.2.0 Instead hotkey Selection

If your keyboard is without < Scroll Lock > button, please press < Caps Lock > or

<Num Lock > instead of Scroll Lock.

Hot Key:

[Ctrl] →[Ctrl] →[Caps Lock] →[Enter] : The hotkey changed to [Caps Lock]

[Ctrl] →[Ctrl] →[Num Lock] →[Enter] : The hotkey changed to [Num Lock]

[Ctrl] →[Ctrl] →[Scroll Lock]→[Enter] : The hotkey reversed to [Scroll Lock]

Note : The default hotkey setting is <Scroll Lock> button as if you change the hotkey

default setting, the new setting will effect on the KVM switch until power off or

reset.

4.2.1 PCs Selection

Hot Key:

[Scroll] →[Scroll] →[ 1 ] →[Enter] or

[Scroll] →[Scroll] →[ 2 ] →[Enter] or

[Scroll] →[Scroll] →[ 3 ] →[Enter]

You can synchronize the PC selection, by using the following two-step Hot Key

sequence. To send commands to the DVI KVM Switch, press the [Scroll] key twice

(Step 1), then press key [1] or [2] or [3] and [Enter] (step 2) to assign the PC to a

particular PC. (If you press key [1] or [2] or [3] on the number pad, the keyboard,

mouse & video will also be switched synchronously)

4.2.2 Auto-Scan Function

Hot Key:

[Scroll] →[Scroll] →[S] →[Enter] to BEGIN.

[Scroll] →[Scroll] →[S], →[Enter] to STOP.

You can activate the Auto-Scan function by using the following two-step Hot Key

sequence. To send commands to the DVI KVM Switch, press the [Scroll] key twice

(Step 1), then press [S] and then press [Enter] (Step 2). When you press the

Auto-Scan hot key sequence, the DVI KVM Switch alternates between the three PCs

and displays them on the monitor.

Each PC is display one of time interval from 5 ~ 250 seconds (The interval is

adjustable) before switching to the next. When you press theAuto-Scan Hot Key

sequence again, the Auto-Scan will stop and the monitor screen will jump back to the

original PC.

Adjustable scan time interval setting ( 5 ~ 250 sec. )

Hot-key: Pressing the <Scroll >, <Scroll > then <S> and <10 ~250 > <Enter>

4.2.3 Beeper Enable

Hot Key:

[Scroll] →[Scroll] →[B] →[Enter] to Disable

[Scroll] →[Scroll] →[B] →[Enter] to Enable

The Speaker/Beeper’s default setting is “Enable”. While the switching connections

are activated and Speaker/Beeper is in “Enable” status, the beeper has a short

beeping sound.

4.3 Audio (Speaker + Microphone) Selection

4.3.1 (PC + Audio) Combination Selection

Hot Key:

[Scroll] →[Scroll] →[ F1 ]→[Enter] or

[Scroll] →[Scroll] →[ F2 ]→[Enter] or

[Scroll] →[Scroll] →[ F3 ]→[Enter]

4.3.2 Single Audio ( Speaker + Microphone ) Selection

Hot Key:

[Scroll] →[Scroll] →[A] →[Enter] to enable or disable the audio auto switch mode

[Scroll] →[Scroll] →[A] →[1]→[Enter] to select PC1 Speaker and Microphone

[Scroll] →[Scroll] →[A] →[2]→[Enter] to select PC2 Speaker and Microphone

[Scroll] →[Scroll] →[A] →[3]→[Enter] to select PC3 Speaker and Microphone

Note 1: Audio auto switch mode, the default setting of KVM switch is enabled,

means when you used the push button, the PCs and Audio will be

switched at the same time. In case of the Audio auto switch mode is

disabled, then the push button only switch PCs.

Note 2: One long sound – Audio auto switch disabled

Two short sound – Audio auto switch enabled

Hot Key definition table

Step 1 Step 2 Action

[Scroll] + [Scroll] [1] + [ Enter ] Switch the active connection to PC 1

[Scroll] + [Scroll] [2] + [ Enter ] Switch the active connection to PC 2

[Scroll] + [Scroll] [3] + [ Enter ] Switch the active connection to PC 3

[Scroll] + [Scroll] [A] + [ Enter ] Disable or enable the Audio auto switch mode

[Scroll] + [Scroll] [F1] + [ Enter ] Combined switching (PC+Audio) to PC 1

[Scroll] + [Scroll] [F2]+ [ Enter ] Combined switching (PC+Audio) to PC 2

[Scroll] + [Scroll] [F3] + [ Enter ] Combined switching (PC+Audio) to PC 3

[Scroll] + [Scroll] [A] + [1] + [ Enter ] Single switching the active audio to PC 1

[Scroll] + [Scroll] [A] + [2] + [ Enter ] Single switching the active audio to PC 2

[Scroll] + [Scroll] [A] + [3] + [ Enter ] Single switching the active audio to PC 3

[Scroll] + [Scroll] [B] + [ Enter ] Disable or enable beeper

[Scroll] + [Scroll] [S] + [Enter] Activate the Auto-Scan mode, default 5 sec.

[Scroll] + [Scroll] [S] + [5 -250 ] +

[ Enter ] Select the Auto-Scan interval from 5 to 250 Sec.

Inhaltsverzeichnis

Sprachen:

Andere LevelOne Schalten Handbücher

LevelOne

LevelOne FSW-0507TX Bedienungsanleitung

LevelOne

LevelOne PLI-3211 Bedienungsanleitung

LevelOne

LevelOne IES-2881 Bedienungsanleitung

LevelOne

LevelOne GTL-5280 Bedienungsanleitung

LevelOne

LevelOne GSW-0840T Bedienungsanleitung

LevelOne

LevelOne GEP - 5271 Bedienungsanleitung

LevelOne

LevelOne IFE-0500 Bedienungsanleitung

LevelOne

LevelOne Infinity IES-0920 Bedienungsanleitung

LevelOne

LevelOne GEP-1070 Bedienungsanleitung

LevelOne

LevelOne KVM-0261 Bedienungsanleitung

LevelOne

LevelOne POH-1260 Bedienungsanleitung

LevelOne

LevelOne FEP-0800 Bedienungsanleitung

LevelOne

LevelOne GEP-2421 Series Bedienungsanleitung

LevelOne

LevelOne GSW-0890 Bedienungsanleitung

LevelOne

LevelOne 1650 Bedienungsanleitung

LevelOne

LevelOne Infinity IES-1081 Bedienungsanleitung

LevelOne

LevelOne FSW-2208TX Bedienungsanleitung

LevelOne

LevelOne GSW-2493 Bedienungsanleitung

LevelOne

LevelOne ViewCon KVM-0850 Bedienungsanleitung

LevelOne

LevelOne GSW-5270 Bedienungsanleitung

LevelOne

LevelOne GEP-1022 Bedienungsanleitung

LevelOne

LevelOne 20 GE PoE-Plus Bedienungsanleitung

LevelOne

LevelOne GEL-1072 Bedienungsanleitung

LevelOne

LevelOne FEP-0511v1 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung