LevelOne KVM-8916 Bedienungsanleitung

LevelOne

KVM-0808/KVM-8916

19” Widescreen LCD Rack Console with

8/16-Port KVM Switch

Quick Installation Guide

Console Combo KVM Switch

Package Checklist

KVM Switch Unit

Quick Installation Guide

Computers/Servers Installation

Each Host port connector is KVM-Cabel type. The 3-in-1 VGA cable has a KVM-Cabel male connector at one end,

plug it into PC port of KVM switch back panel, and plug the other end’s connectors to PC VGA port, and if

■PS/2 Computers --- Connect PS/2 keyboard connector to keyboard port, and PS/2 mouse connector to mouse

port.

■USB Computers --- connect PS/2-USB changer to PS/2 keyboard connector, then plug the changer into

available USB port. This single USB port can communicate both keyboard and mouse signals. It works as a

standard HID (Human Interface Device), no extra driver needed.

■Note: the PS/2 mouse connector should be left disconnected.

Console Installation

Local Console --- Connect the keyboard, mouse and monitor to the local console ports.

Remote Console --- With a CAT5 cable, one end connecting to the RJ45 connector on the CAT5 extender module,

and the other end connecting to CAT5 Receiver.

The recommended Power Up sequence is as follows: monitor, KVM Switch, finally the computers.

Hotkeys & OSD

The table blow lists all supported hotkey commands.

Command

Function

Space bar

Bring up the OSD overlay screen

↑or↓

Moving Up or Down

[1,2,..,8] bank,

[01, 02,..,32] port

■The first digit is bank number starting with “1”. The first

KVM switch unit on the Daisy chain line is of bank 1 (the

Master). A standalone KVM switch is fixed in bank 1.

■The second & third digits are port number starting with “01”

PgUp

Previous bank

PgDn

Next bank

To enable/disable beep sound function

To enable/disable the Screen Saving function and 10min

auto-logout function. This function is default OFF (Disable).

To enable Firmware upgrade function

To log out the OSD. If Security is enabled it will show up the

is disabled it will show up the Status window

For SUPERVISOR to set the OSD back to factory default

value (except User Security settings).

For SUPERVISOR to activate the Auto-Scan function

For SUPERVISOR to enable/disable Security function. If the

Security is off, we don’t need user name & password to access

to the KVM system. This function is default OFF (Disable).

Example #1 –To bring up the OSD overlay window, press “Caps Lock”, “Caps Lock”, and the “Space Bar”.

Immediately, the OSD overlay screen will appear. The superimposed menu screen is generated by the KVM switch,

and does not affect your computers or software function in any way.

Example #1 –To bring up the OSD overlay window, press “Caps Lock”, “Caps Lock”, and the “Space Bar”.

Immediately, the OSD overlay screen will appear. The superimposed menu screen is generated by the KVM switch,

and does not affect your computers or software function in any way.

Example #2 –To switch to Bank 1 Port1, press “Caps Lock”, “Caps Lock”, and “1”, “0”, “1”.

please enter next key in

2 seconds in the

Hotkey sequence

please enter next key in

2 seconds in the

Hotkey sequence

Caps

Lock

Caps

Lock

Space Bar

please enter next key in

2 seconds in the

Hotkey sequence

Caps

Lock

Caps

Lock

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere LevelOne Schalten Handbücher

LevelOne

LevelOne GTL-2890 Bedienungsanleitung

LevelOne

LevelOne IES-0853 Bedienungsanleitung

LevelOne

LevelOne OfficeCon GSW-0841 Bedienungsanleitung

LevelOne

LevelOne GSW-1676 Bedienungsanleitung

LevelOne

LevelOne GEP-2651 Bedienungsanleitung

LevelOne

LevelOne KVM-0290 Bedienungsanleitung

LevelOne

LevelOne GSW-2494 Bedienungsanleitung

LevelOne

LevelOne Infinity IES-1080 Bedienungsanleitung

LevelOne

LevelOne FSW-1611TX Bedienungsanleitung

LevelOne

LevelOne FSW-1650 Bedienungsanleitung

LevelOne

LevelOne GSW-5150 Bedienungsanleitung

LevelOne

LevelOne GTL-2691 Bedienungsanleitung

LevelOne

LevelOne GSW-4870TGX Bedienungsanleitung

LevelOne

LevelOne FSW-1621 Bedienungsanleitung

LevelOne

LevelOne FSW-2470 Bedienungsanleitung

LevelOne

LevelOne GEP-1070 Bedienungsanleitung

LevelOne

LevelOne FGL-2870 Bedienungsanleitung

LevelOne

LevelOne GES-0852 Bedienungsanleitung

LevelOne

LevelOne GSW-2470TGX Bedienungsanleitung

LevelOne

LevelOne GSW-0509 Bedienungsanleitung

LevelOne

LevelOne HDSpider Series Bedienungsanleitung

LevelOne

LevelOne ProCon GSW-2456 Bedienungsanleitung

LevelOne

LevelOne FEP-1601 Bedienungsanleitung

LevelOne

LevelOne FSW-0507TX Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung