LevelOne ViewCon KVM-0205 Bedienungsanleitung

LevelOne Palm-Sized

KVM Switch

KVM-0205 KVM-0405

User's Guide

Table of Content

■Introduction

Overview……………...……………………………....1

Features………………….………………………..….2

■Installations

Console Connection……………….………………...3

Computers Connection……………….……….….…5

Initial Power-up……………….………………..…….6

■Operations

Front Panel operation…………...…………...…..….7

Hot-key commands…...…………...……………..….7

■Appendices

Specifications………………..……………………...10

Troubleshooting..………………..……….…………11

Please read this manual thoroughly

and follow the Installation procedures to

prevent any damage to the LevelOne

Palm-Sized KVM or any connecting device.

----------------- Introduction

Overview

The LevelOne Palm-Sized KVM, KVM-0205 and

KVM-0405 are computer switches that allows access to

two or four IBM compatible computers respectively from

one PS/2 keyboard, mouse and monitor. Switching

between computers is as easy as pressing the push

button or entering hot-key commands from your

keyboard. There is no interface card and software to

install and the LevelOne Palm-Sized KVM is independent

of the computer operating system.

Ready to run right out of the box, this Kit comes with

everything you need - a switch and complete cable sets,

just hook them up and go. By allowing one console to

manage all your computers, the LevelOne Palm-Sized

KVM eliminates the expense for extra consoles, the

spaces for extra peripherals and the time hopping around

for accessing different computers.

Features

!Unique loose-free cables included preventing

keyboard or mouse connector from getting loose.

!Supports PS/2 keyboard and mouse.

!Keyboard and mouse emulation for error-free PC boot

up.

!Keyboard and mouse hot pluggable at any time

without turning either LevelOne Palm-Sized KVM or

PCs off.

!Space-saving design.

!Auto scan automatically selects computers

sequentially.

!Supports M/S IntelliMouse (Pro), Explorer, Optical.

!Hot-key and push button allow easy computer

access.

!Keyboard states automatically saved and restored

when switching computers.

!Operating system independent, transparent to all

applications.

!High VGA resolution 1920x1440.

!DDC2B compatible.

!Power-free operation - the LevelOne Palm-Sized

KVM draws power from the attached PCs.

-----------------Installation

Console Connection

Turn your computers off. Connect a PS/2 keyboard to

the mini-DIN-6 port marked with “Keyboard” and a PS/2

mouse to the mini-DIN-6 port marked with “Mouse”.

Then connect your VGA monitor cable directly to the

HDB-15 port as shown in figure 1.

Figure 1: KVM-0205 Console Connection

The figure 2 shows 4-port LevelOne Palm-Sized KVM

console connection.

Figure 2: LevelOne KVM-0405 Console Connection

The multi-sync monitor must be capable of synchronizing

with the computer's video signal. If you are uncertain

about the monitor type, please consult the monitor user's

manual.

The LevelOne Palm-Sized KVM consumes negligible

power and is designed to run reliably without an external

power adapter.

Computers Connection

LevelOne Palm-Sized KVM comes with complete cable

sets facilitating computer connection. One side of the

cable has an HDB-15 connector and the other side has

three connectors (one HDB-15 and two mini-DIN6s).

The PC 1 ~ PC 4 marks on the LevelOne Palm-Sized

KVM are for computer connection as shown in figure 3.

Figure 3: COMPUTER Connection

NOTE: If your computer uses an AT style keyboard, you

will need an "AT-to-PS/2 keyboard adapter" at the

computer keyboard port. 6

Initial Power-up

Make sure all computers and the LevelOne

Palm-Sized KVM are powered down during

installation. You may power up the computers after

installation,. The LevelOne Palm-Sized KVM can be

powered from the computers. This procedure

ensures the LevelOne Palm-Sized KVM receive

computer settings correctly when computer boots.

NOTE: You may hot plug any additional powered-down

computer to the LevelOne Palm-Sized KVM at any time

after the initial power up.

----------------- Operations

Front Panel operation

You may switch to a different computer by pressing the

front panel push-button directly or by issuing hot-key

commands. The front-panel LED illuminates indicating

the active port. The LED flashes while in either Auto

Scan or Manual Scan mode.

Should you encounter any keyboard or mouse problem,

press and hold down the push-button for 3 seconds to

initialize the keyboard and mouse.

Hot-key commands

Hot-key command is a short keyboard sequence to

select a computer or to activate computer scanning.

LevelOne Palm-Sized KVM interprets keystrokes for

hot-keys all the time. A hot-key sequence starts with

two left Ctrl keystrokes followed by one or two more

keystrokes.

!To select a computer:

leftCtrl + left Ctrl + 1

Selects the computer at PC 1.

leftCtrl + left Ctrl + 2

Selects the computer at PC 2.

left Ctrl + left Ctrl + 3

Selects the computer at PC 3 (for

KVM-0405 only).

leftCtrl + left Ctrl + 48

Selects the computer at PC 4 (for

KVM-0405 only).

NOTE: Do not use the keypad at the right side of

the keyboard for hot key commands.

!To start Auto Scan, automatically scans all

ports one by one at a fixed interval:

leftCtrl + left Ctrl + F 1

To abort the Auto Scan mode, press the left Ctrl

key twice. Keyboard and mouse are both

operational during Auto Scan. When it detects

any keyboard or mouse activity, it suspends Auto

Scan until the activity stops; it then resumes with

the next computer in sequence. The length of

the Auto Scan interval (Scan Rate) is adjustable,

see below. LED flashes during Auto Scan for

KVM-0405 only.

!Manual Scan enables you to manually switch

back and forth between computers.

leftCtrl + left Ctrl + F2

Press ↑or ↓to select the previous or the next

computer in sequence. And, press any other

key to abort the Manual Scan. LED flashes

during Manual Scan for KVM-0405 only.

!To adjust Scan Rate which sets the duration

before switching to the next computer in Auto

Scan: leftCtrl + left Ctrl + F3

There are four options: 3, 8, 15 and 30 seconds.

NOTE: Scan Rate is set to default of 3 seconds

after LevelOne Palm-Sized KVM loses power, i.e.,

all connected computers are turned off.

!To adjust keyboard typematic rate

(characters/sec), this setting over-rides that of

BIOS and any operating system:

leftCtrl + left Ctrl + F4

There are four options: 10, 15, 20 and 30

characters/sec.

NOTE: The keyboard typematic Rate is set to

default of 10 characters/sec when LevelOne

Palm-Sized KVM loses all power sources, i.e., all

connected computers are turned off.

----------------- Appendices

Specifications

Specification KVM-0205 KVM-0405

Console port number 1

Computer port number 2 4

Port selection push button 1

Hot plug-and-play Yes

Hot-key control Yes

VGA 1920 x 1440, DDC2B

Y2K compliance Yes

Computer connector HDB15 x 2 HDB15 x 4

Console connector

Keyboard

Mouse

Monitor

PS/2

HDB15

Automatic scan interval 3, 8, 15, 30 seconds

Cable length 1.8m x 2 1.8m x 4

H x W x D (mm) 120 x 40 x 77

Power-free operation Yes

Troubleshooting

Ensure that all cables are well seated. Check

that keyboard/mouse cables are not swapped.

Label the cables for each computer to avoid

confusion when connected to the device.

Symptom Causes Solutions

Keyboard or

mouse does not

work

Improper power-up

sequence.

Keyboard or

mouse not properly

initialized.

Press and hold down the

push button for 3

seconds, the LevelOne

Palm-Sized KVM will

re-initialize the keyboard

and mouse.

If problem persists,

unplug the keyboard or

mouse, wait for few

seconds then plug it back.

Keyboard error

on boot Loose keyboard

connection. Make sure keyboard

cables are well seated.

Keyboard

strokes shifted The computer was

in shifted state

when last switched

Press both SHIFT keys.

Computer can

not use serial

mouse.

The

LevelOne

Palm-Sized KVM does

not support serial mouse.

Scan Rate was

set to 30 sec

and becomes 3

sec.

All connecting

computers are

powered off.

LevelOne

Palm-Sized KVM

r resets.

Set the Scan Time again

and keep at least one

computer on all the time.

Package Contents:

▓The complete KVM-0205 contains:

KVM-0205(2-port KVM) x 1

Custom cable set 1.8M(6ft) x 2

User’s manual x 1

▓The complete KVM-0405 contains:

KVM-0405(4-port KVM) x 1

Custom cable set 1.8M(6ft) x 4

User’s manual x 1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere LevelOne Schalten Handbücher

LevelOne

LevelOne GEP - 5271 Bedienungsanleitung

LevelOne

LevelOne KVM-0830 Bedienungsanleitung

LevelOne

LevelOne GEL-2681 Bedienungsanleitung

LevelOne

LevelOne GSW-2493 Bedienungsanleitung

LevelOne

LevelOne FSW-2106 Bedienungsanleitung

LevelOne

LevelOne kvm-0201 Bedienungsanleitung

LevelOne

LevelOne INFINITY IES-0520 Bedienungsanleitung

LevelOne

LevelOne GSW-1676 Bedienungsanleitung

LevelOne

LevelOne GEU-1628 Bedienungsanleitung

LevelOne

LevelOne ProCon GSW-2496 Bedienungsanleitung

LevelOne

LevelOne FSW-0508TX Bedienungsanleitung

LevelOne

LevelOne FEP-0811 Bedienungsanleitung

LevelOne

LevelOne ProCon GSW-1291 Bedienungsanleitung

LevelOne

LevelOne KVM-0211 Bedienungsanleitung

LevelOne

LevelOne GEP-2650 Bedienungsanleitung

LevelOne

LevelOne GSW-2475T Bedienungsanleitung

LevelOne

LevelOne KVM-0831 Bedienungsanleitung

LevelOne

LevelOne IES-0820 Bedienungsanleitung

LevelOne

LevelOne 20 GE PoE-Plus Bedienungsanleitung

LevelOne

LevelOne FGL-2870 Bedienungsanleitung

LevelOne

LevelOne IGP-1271 Bedienerhandbuch

LevelOne

LevelOne 59910203 Bedienungsanleitung

LevelOne

LevelOne GEL-2870 Programmierhandbuch

LevelOne

LevelOne GEL-5261 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung