Levolor InMotion Installations- und Betriebsanleitung
Solar Panel Installation and Reference Guide
InMotion™Motorization
Declarations............................................................................................................. 2
Safety Instructions ................................................................................................. 3
InMotion™Solar Panel Overview........................................................................... 4
Before Installation –What you need to know..................................................... 5
InMotion™Solar Panel Installation Guide ........................................................... 7
Troubleshooting ...................................................................................................... 9
2
DECLARATIONS
U.S. Radio Frequency FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
ISED RSS Warning:
This device complies with Innovation, Science and Economic Development Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the
device. Le présent appareil est conforme aux CNR d’ISED applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2)
l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d’en compromettre le fonctionnement.
InMotion™Solar Panel |Reference Guide
Do not dispose of in general waste.
Please recycle batteries and damaged electrical products appropriately.
SAFETY INSTRUCTIONS
ATTENTION: IMPORTANT SAFETY INSTRUCTION TO BE READ BEFORE INSTALLATION:
• Any changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
• Incorrect installation can lead to serious injury and will void manufacturer’s liability and warranty.
IMPORTANT SAFETY INSTRUCTIONS TO BE READ PRIOR TO OPERATION:
• It is important for the safety of persons to follow the enclosed instructions. Save these instructions for
future references.
• Persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience
or knowledge should not be allowed to use this product.
• Keep Solar Panel away from children.
• Frequently inspect for improper operations. Do not use if repair or adjustment is necessary.
IMPORTANT SAFETY INSTRUCTIONS:
• Do not expose motor to moisture or extreme temperature.
• Do not allow children to play with this device.
• Use or modification outside the scope of this instruction manual will void warranty.
• Installation and programming to be performed by a suitable quality installer.
• For use with Li-ion motors and rechargeable battery packs only.
• Do not cut power cables.
• NOT suitable for exterior application.
• Do not drill into motor body or solar panel body.
• The routing of cable through walls shall be protected by isolating bushing or grommets.
• Ensure power cable is clear and protected from moving parts.
• If cable or power connector is damaged do not use.
3InMotion™Solar Panel |Reference Guide
Wood/Faux
Tilt-Only
INMOTION™ SOLAR PANEL OVERVIEW
Roller Shades Cellular Shades Roman Shades
Banded Shades Natural Woven
AVAILABLE PRODUCTS
Working Voltage (Vm): 5V Electrical performance tolerance: voltage ±10%;
current ±10%
Open circuit voltage (Voc): 6.3V International solar energy inspection
standards:
solar radiation 1000W/m2;
1.5 Air Mass; humidity 25° C
Short-circuit current (lsc): 659mA
Electricity requirements
(each solar panel includes solar
battery cells):
conversion efficiency 21%;
open circuit voltage (Voc) 6.3V
Working current (lm): 606mA IP Rating: IP55
Max. Output Power (Under
1000W/m2): 3W Temp Working Range: 14°F to 122°F
(-10°C to 50°C)
SPECIFICATIONS
2"
52mm
18.7"
475mm
15.6"
395mm
59"
1.5m
DIMENSIONS
1
2
3 4 5
1. Solar Panel
2. Cable: Male Micro USB (compatible with all InMotion™rechargeable battery products)
3. VHB™Installation tape (Recommended method)
4. Metal “L” Installation Bracket (Alternative method)
5. Screws and Anchors (x4pcs)
SOLAR PANEL PARTS
4InMotion™Solar Panel |Reference Guide
Sheer Shadings
Source: http://www.fsec.ucf.edu
Suns path on Summer solstice at a southern latitude
The Solar Panel may not be a good fit for every
window. In the summer, the sun rises higher in
the sky than in the winter months. The further
north, the lower the midday winter sun will be.
Due the sun position, Solar panels installed
facing north produce 4 times less energy than
a device installed facing south. For this reason,
we do no recommend the use of solar panel on
windows facing North.
Summer Performance Winter Performance
South Face 100% 70%
West Face 95% 90%
East Face 90% 70%
North Face 60% 25%
BEFORE INSTALLATION – WHAT YOU NEED TO KNOW
CONSIDER THE GEOGRAPHIC LOCATION OF THE INSTALLATION
Understanding the sun’s motion relative to a site
is a crucial element to predict the solar panel
performance. In other words, a solar panel
located in Texas will harvest more energy than a
unit installed in Canada (considering both facing
south, using similar window). The same can
be said between Summer and Winter harvest
performance.
As a main recommendation, installations on
northern areas are recommended only for small
and middle size shades (up to 48" x 60"), with up to
one cycle per day. More aspects affect the performance of
solar panels and should be considered, not being possible
a “one size fits all” approach.
Understanding the sun’s motion relative to a site is a crucial element to
predict the solar panel performance. A solar panel located in Texas
will harvest more energy than a unit installed in Canada (considering both
facing south, using similar window).
Suns path on Winter solstice at a southern latitude
Solar Noon
Sunset
Sunrise
38°
Altitude
Angle
S
E
W
N
Solar Noon
86° Sunset
Sunrise
S
E
W
N
5InMotion™Solar Panel |Reference Guide
DEFINE THE BEST LOCATION TO INSTALL
The solar panel is designed for indoor use only. To maximize the performance of the solar panel, it should be
installed as close as possible to the window glass, allowing as much natural light as possible to reach the panel.
Important
Any element between the Sun light and the solar panel will impact the charging time, and in some situations,
prohibit the use of a solar panel. Overcast weather is an example of possible obstruction that impossible to
predict or control, but there are other elements that we should consider before installing a solar panel, like:
• Awnings
• Trees
• Deep Eaves
• Tall buildings and walls
• Insect Screen
• Others
Other elements are not so obvious but can make it difficult to use a solar panel. The solar panel will have a low
performance when installed on locations with:
• Tinted windows
• High performance glass (also known as energy efficiency glass)
• Multi panel glass
• Any window with treatment that reduces the light transmission below 65%
• Window dividers overlapping solar panel
BEFORE INSTALLATION – WHAT YOU NEED TO KNOW
Single or Double Pane
OK
Light Transmission
>65%
Clear Tinted
Do Not Use Solar Panel Under Below Conditions
Awnings Deep Eaves Vegetation Blocking Light Insect Screen
6InMotion™Solar Panel |Reference Guide
INSTALLATION USING PROVIDED INSTALLATION TAPE
First, clean solar panel corners and window area using alcohol and a cloth pad. Let dry for a few minutes.
On a flat surface, place the solar panel facing up and carefully apply the VHB™installation tape on both sides
of the solar panel.
Remove the “face” of the applied adhesive. Position the solar panel facing to outdoors, then press entire panel
with firm, even pressure into the glass for 10–15 seconds. The panel is now supported by the adhesive to glass
bond but will require 24 hours of cure time to allow full strength characteristics. Do not disturb during this period.
HOW EFFICIENT WILL MY SOLAR PANEL PERFORM?
There is no direct answer for this question. Beside all the elements already described that impact how much
energy will be harvested from the sun, there is also the question of how fast the energy will be drained by
the shade itself due to:
• Shade composition (fabric weight)
• Number of cycles per day
• Size of shade (how long the motor will run per cycle)
The answer for these questions should be considered to evaluate if the solar panel is the best fit for the application.
The solar panel must always be install indoors, directly against the window glass to allow as much natural light
as possible to reach the panel. For your convenience, the solar panel can be installed using VHB™ installation tape
(recommended method) or Metal “L” Installation Bracket (alternative method).
BEFORE INSTALLATION – WHAT YOU NEED TO KNOW
INMOTION™SOLAR PANEL INSTALLATION GUIDE
7InMotion™Solar Panel |Reference Guide
Finally, attach the solar panel
into the installation bracket,
position the bracket in the
center of the solar panel.
First, install the mounting
bracket to wall/mounting
point using the screws
provided.
Next, adjust the bracket
length by lengthening or
shortening the “extendable”
bracket with the 2 screws.
ATTACHING “L” INSTALLATION BRACKET TO WINDOW FRAME
The “L” installation bracket is provided as an
option when an installation direct on the glass is
not possible. A common application is to mount
the “L” Bracket on the window frame–either
top mount or side mount. Ensure the Solar
panel and it’s bracket are not blocking the free
movement of the bottom rail.
INMOTION™SOLAR PANEL INSTALLATION GUIDE
Top Mount Side Mount
8
InMotion™Solar Panel |Reference Guide
Solar Panel
USB Charging Cable
CONNECT WITH BUILT IN RECHARGEABLE BATTERY MOTOR
INMOTION™SOLAR PANEL INSTALLATION GUIDE
Issues Possible Causes Solution
The motor has no
response
Battery in motor is depleted Recharge with compatible charger and check
connection and positioning of solar panel
Insufficient charging from solar panel Check connection and orientation of solar PV panel
Remote control battery is discharged Replace battery
Battery is inserted incorrectly into
remote control Check battery polarity
Radio interference/shielding Ensure remote control and the antenna on the motor
are positioned away from metal objects
Motor/receiver distance is too far
from remote control Move remote control to a closer position
Power failure Check power supply to motor is connected and active
Incorrect wiring Check that wiring is connected correctly (refer to
motor installation instructions)
Motor beeps 10 times
when in use
Battery voltage is low/PV
(solar panel issue)
Recharge with charger or check connection and
positioning of solar panel
TROUBLESHOOTING
9InMotion™Solar Panel |Reference Guide
Micro-USB
Charging Port
(Cellular, Natural,
and Roman Shades)
Micro-USB Charging Port
Guía de referencia e instalación de paneles solares
Motorización InMotion™
Declaraciones ......................................................................................................... 11
Instrucciones de seguridad..................................................................................12
Resumen del panel solar InMotion™....................................................................13
Antes de la instalación: lo que necesita saber..................................................14
Guía de instalación del panel solar InMotion™..................................................16
Solución de problemas ........................................................................................ 18
Andere Handbücher für InMotion
3
Inhaltsverzeichnis
Sprachen:
