Levolor Sheer Shadings Bedienungsanleitung
Motorized Operating System
Sistema de funcionamiento motorizado
Système motorisé
Sheer Shadings
Persianas traslúcidas
Stores diaphanes
INSTALLATION • OPERATION • CARE
INSTALACIÓN • FUNCIONAMIENTO • CUIDADO
INSTALLATION • FONCTIONNEMENT • ENTRETIEN
WARNING: Keep all small parts, components and packaging away
from children as they pose a potential choking hazard which may
result in serious injury or death. Please reference all warning tags
and labels in the instructions and on the shade.
!
CANADIAN RESIDENTS ONLY
• Control operation systems vary by country. Call 1-866-937-1875 for
more information.
• For all safety, related inquiries, call 1-866-662-0666 or visit www.canada.ca,
search "blind cords".
• These instructions include references to some product features and operating
capabilities that may not be available in Canada.
WARNINGSTRANGULATION HAZARD —
Young children can be strangled by cords. Immediately remove
this product if a cord longer than 22 cm or a loop exceeding
44 cm around becomes accessible.
Getting Started
Product View ....................................................................................................3
Tools and Fasteners Needed ..........................................................................4
Installation
Installation Overview .......................................................................................5
Before You Begin..............................................................................................6
Mount the Installation Brackets–Inside Mount ........................................6–7
Mount the Installation Brackets–Outside Mount .................................... 7–9
Mount the Installation Brackets–Side Mount ...............................................9
Install the Shading ......................................................................................... 10
Attach the Magnetic Hold-Down Brackets (Optional) ................................ 10
Operation
Remote Operation ..........................................................................................11
Battery Charging ............................................................................................11
Troubleshooting ........................................................................................11–13
Care
Removing the Shading ...................................................................................14
Cleaning Procedures ............................................................................... 14–15
Warranty ........................................................................................................ 15
CONTENTS
2© 2022 LEVOLOR®
Sheer Shadings Motorized Operating System
Product View
Headrail
Headrail
End Cap
End Cap
Magnetic
Hold-Down
Bracket
(optional)
Installation
Bracket
Limit Stop
Bottom Rail
Hub
(optional)
Remote Control Kit
(optional)
AAA Battery
(2-Pack) Remote Control Remote Control
Holder
Power Adapter
Micro-USB
Charging Cable Magnetic
Charging Adapter
GETTING STARTED
3
Sheer Shadings Motorized Operating System
Thank you for purchasing LEVOLOR® Sheer Shadings. With proper installation,
operation, and care, your new shadings will provide years of beauty and performance.
Please thoroughly review this instruction booklet before beginning the installation. For
information regarding operation and programming, refer to the guide included with
your remote control.
Tools and Fasteners Needed
• Flat and Phillips head screwdrivers • Level (laser level is recommended)
• Measuring tape and pencil • Pliers and/or Scissors (heavy-duty)
• Power drill, 3
/
32" drill bit,
and ¼" hex driver
In addition, you will need fasteners designed to work with your specific mounting
surface(s).
• #6 Hex Head Screws (Provided) Two 1½" screws are provided per
installation bracket.
• Longer #6 Hex Head Screws (Not Provided) If using spacer blocks, use
#6 screws long enough for a secure attachment.
• Speed Nuts and Screws (Provided) Extension brackets come with screws
and speed nuts.
• Drywall Anchors (Not Provided) Use drywall anchors when mounting
into drywall.
Large Fabric Roll Small Fabric Roll
Importance of Limit Stops on Window Shadings
Limit stops serve as the upper travel limit for the bottom rail, preventing it from
rotating around the fabric roll. Limit stops are located 6" from the ends of the
headrail or are centered on shadings less than 36" wide.
When a shading is made, the limit stops are adjusted according to the size of the
fabric roll. Occasionally, this adjustment changes during shipping or installation.
If this happens, problems can be fixed by readjusting the limit stops. See page 12
in the Troubleshooting section if shading operation is difficult or if the bottom rail
rotates around the fabric roll. Shown below are the four possible positions of limit
stops for large to small fabric rolls.
Speed Nut
and Screw
(Two Provided with
Each Extension Bracket)
#6 x 1
1
/
2
"
Hex Head Screw
(Provided)
Longer #6 Hex Head Screw
for Use with Spacer Blocks
(Not Provided)
GETTING STARTED
4Sheer Shadings Motorized Operating System
Shim– A thin strip of material used to align parts to make them fit.
• Refer to the appropriate page below based on your order:
— Inside Mount Page 6
— Outside Mount Page 7
— Side Mount Page 9
Mounting Types and Window Terminology
If the installation brackets are mounted correctly, the rest of the installation process
follows easily. To prepare for this important first step, review the mounting types and
basic window terminology illustrated below.
Installation Overview
• Your order will include the correct number of installation brackets for your shading
width, as shown in the table below.
• Shading orders may also include spacer blocks or extension brackets, if they were
specified for added clearance.
— Extension brackets are used for side mount shadings, as well.
For Added Clearance
1⁄4" and 1⁄2"
Spacer Blocks
Extension Bracket
3
3
⁄
16
"
Installation Bracket For Added Clearance
Panel Width Brackets
2
3
4
5
Extension
Bracket
1
/
4
" and
1
/
2
"
Spacer Blocks
12" – 36"
36
1
/
8
" – 79"
79
1
/
8
" – 96"
96
1
/
8
" – 120"
3"
Installation Bracket
For Added Clearance
Panel Width Brackets
2
3
4
Extension Bracket
1
/
4
" and
1
/
2
"
Spacer Blocks
18" – 36"
36
1
/
8
" – 79"
79
1
/
8
" – 84"
CAUTION: Failure to follow ALL installation instructions may cause the shading
to fall, possibly resulting in injury or property damage.
!
Outside Mount
Shading mounts
outside window
opening.
Inside Mount
Shading fits within
window opening.
Collectively, the sill and
jambs are called the
“window casement.”
Molding
Head Jamb
Sill
Jamb Jamb
INSTALLATION
5
Sheer Shadings Motorized Operating System
Pair Shade Before Installing
REMOTE CONTROL
• Use the – and + buttons to select the
channel to pair to.
• Press and hold the programming button
on the window covering for about 2
seconds until the shade jogs and/or
beeps once.
• In the next 10 seconds, press and hold
the on the remote until the shade jogs
twice and/or beeps three times.
USING THE INMOTION APP
• If you purchased a hub, download the LEVOLOR InMotion™ app to get started.
• Shade can be directly paired to app, but it is recommended to pair to remote first.
Before You Begin
INSIDE MOUNT
Mount the Installation Brackets
• Measure and mark 5" in from each jamb for bracket location.
— If more than two installation brackets come with your order, space additional
bracket(s) evenly between the two end brackets and mark their location.
Mount into wood whenever possible.
Motor
Side
JambJamb
Limit stops should be equal
distance from the ends of headrail.
5"
Space Evenly Space Evenly
5"
TOP VIEW WINDOW SIDE
ROOM SIDE
• Center the brackets on your marks, then mark the screw hole locations.
— The minimum depth for installation brackets is 1¼".
— The minimum depth for a fully recessed mount is 3½".
Micro-USB Charging Port
Indicator Light
Programming
Button
INSTALLATION
6Sheer Shadings Motorized Operating System
OUTSIDE MOUNT
Mount the Installation Brackets
• Center the headrail over the window opening at the desired height. Use a pencil to
lightly mark each end of the headrail.
— Alternatively, measure the width of the headrail and use that width to mark the
headrail end points over the window opening.
• Mark 5" from each end of the headrail.
— If more than two installation brackets came with your order, space additional
bracket(s) evenly between the two end brackets and mark their location.
Mount into wood whenever possible.
Lever
• Drill the screw holes using a 3
/
32" drill bit.
IMPORTANT: Use drywall anchors when mounting
into drywall.
• Use a level to check that the mounting surface is level.
Shim the brackets, if necessary.
• Attach the installation brackets using the screws provided.
IMPORTANT: Do not overtighten the screws. Check to ensure the lever can be
moved easily side to side. If not, loosen the screws in one-eighth turn increments
until the lever can be moved easily.
• If using spacer block(s), stack spacer block(s) on
top of the installation brackets. Using #6 Hex Head
Screws, long enough for secure installation (not
provided), install screws up through the underside
of the installation bracket and spacer block(s) into
mounting surface.
IMPORTANT: Do NOT add more than 1 ½". of clearance using the spacer blocks.
— Mark location for the screws within the slots in the
bracket. The bracket location can be adjusted back or
forth based on the casement depth.
IMPORTANT: The front edges of the installation brackets
must be level and aligned to each other.
5"
Mounting
Depth
CAUTION: Failure to properly align the brackets could result in the
headrail releasing from the brackets causing the shading to fall, possibly
resulting in injury or property damage.
!
Spacer
Blocks 1½"
Maximum
INSTALLATION
7
Sheer Shadings Motorized Operating System
1
1
/
8
"Extension
Bracket
1
1
/
4
"
Headrail End Marks
Window Opening
Motor
Side
Space EvenlySpace Evenly
5" 5"
• Center the installation brackets or extension brackets on your marks and mark
where to drill the screw holes.
— A minimum 1
1
/
8
" flat vertical surface is required for the installation brackets and
extension brackets require 1
1
/
4
".
— The tops of the installation brackets or extension brackets should be at the
desired height. The brackets should be level and aligned.
IMPORTANT: The rear of the brackets must be flush against a flat mounting
surface. Do NOT mount brackets on curved molding.
• Drill the screw holes using a 3
/
32" drill bit.
IMPORTANT: Use drywall anchors when mounting into drywall.
• Attach the installation or extension brackets
using the screws provided.
IMPORTANT: The tops of the
installation brackets or extension
brackets must be level with
their front edges aligned.
INSTALLATION
8Sheer Shadings Motorized Operating System
• If using spacer block(s): stack spacer block(s)
on the backside of the installation brackets.
Using #6 Hex Head Screws (not provided), which
are long enough to provide secure installation,
install screws through the installation bracket and
spacer block(s) into mounting surface.
IMPORTANT: Do not add more than 1½"
of clearance using spacer blocks.
IMPORTANT: The tops of the installation
brackets must be level with the front
edges aligned.
IMPORTANT: Use drywall anchors when
mounting into drywall.
• If using extension brackets, attach an installation
bracket to the underside of each extension bracket
using the speed nut and screw provided.
1
1
/
2
"
Maximum
Spacer
Blocks
Longer
Screw
SIDE MOUNT
Prepare the Installation Brackets
Side mount the headrail when conventional mounting techniques will not work–for
example, in an arched window opening.
• Mount the extension brackets on a surface at least 1¼" wide.
• Attach the installation brackets to the extension
brackets using the provided screws and speed nuts.
IMPORTANT: When securing side mounted shadings into
a surface other than a secure wall stud, use medium to
heavy-duty wall anchors (not provided). Match anchors to
the wall thickness. Failure to mount the brackets securely
may result in injury or property damage.
NOTE: Spacer blocks cannot be used with side mount
installations.
Extension
Bracket
1
1
/
4
"
Minimum
Depth
Speed Nut
Extension
Bracket
Screw
INSTALLATION
9
Sheer Shadings Motorized Operating System
Install the Shading
• Position the shading so that the
front (colored fabric) faces you.
• Slide the headrail into the
installation brackets so the edge
of the headrail is between the lever
and the bracket, as shown.
• Firmly push the headrail into each bracket until it clicks and the lever
snaps to the right side of the bracket.
IMPORTANT: Carefully pull on the headrail at each bracket to ensure it is
installed securely.
Headrail
Installation
Bracket
Lever
Slide the Headrail
between the Lever
and the Bracket.
Outside Mount Inside Mount
Preferred PreferredAlternate Alternate
Attach the Magnetic Hold-Down Brackets (Optional)
• Lower the shading while keeping the vanes closed.
• Place the magnetic hold-down bracket onto the bottom rail just
inside the end cap, oriented as shown.
• Hold the bracket while opening and closing the vanes (it may
be necessary to have someone else assist you). Adjust the
bracket to the best overall position.
• Mark the screw location using the mounting options shown below.
— The screw should be placed in the middle of the channel. This will
allow for adjustment.
• Drill the screw holes using a 3
/
32" drill bit.
IMPORTANT: Use drywall anchors when mounting into drywall.
• Attach the hold-down brackets to the mounting surface
using the screws provided.
• If necessary, adjust bracket height by loosening the screw
and sliding the bracket up or down.
Hold-Down
Bracket
Bottom
Rail
Adjust the
bracket
using the
channel.
INSTALLATION
10 Sheer Shadings Motorized Operating System
Andere Handbücher für Sheer Shadings
4
Inhaltsverzeichnis
Sprachen:
Andere Levolor Jalousie Handbücher
Levolor
Levolor Riviera Blind Bedienungsanleitung
Levolor
Levolor Natural Shades Remote Control Bedienungsanleitung
Levolor
Levolor InMotion Bedienungsanleitung
Levolor
Levolor Shutters Remote Control Stücklistenhandbuch
Levolor
Levolor Sheer Shadings Stücklistenhandbuch
Levolor
Levolor Corded Lift Control Bedienungsanleitung
Levolor
Levolor Real Wood Blind Series Stücklistenhandbuch
Levolor
Levolor Roman Shades Bedienungsanleitung
