Lexar SILVER Series Bedienungsanleitung

Q&A 1 –Card not recognized by computer

The issue could be the card is not recognized on a card reader.

1. Memory card locked or write protected? If you see “SD card locked” on your digital

camera or “The disk is write-protected?” on your computer, you should turn off the

write-protect lock.

2. Insert the card into a UHS-II card reader, and connect the reader to your computer.

We suggest using a Lexar Card reader for confirmed compatibility. If the connection

works fine, open the Disk Management on your computer and check if the capacity

and the formatting with SD Formatter tool is successful.

3. If you cannot format the card and there is no appearance damage, suggest

contacting Lexar Technical Support for RMA process.

Q&A 2 - Card not recognized by camera

1. It’s important to choose the right card for your camera. Please refer to the Lexar

Compatibility Guide on Lexar.com or your device’s user manuals to choose the right

card for your camera and applications. If you choose an unsuitable card, it will cause

the continuous high-bit video recording to record slowly and cause dropped frames

or loss of data.

2. Make sure the card's file system is compatible with your camera. The file system of

RAW will not be recognized by a camera.

3. Check whether the card is caused by poor contact: whether the card is fully inserted

into the card slot, or the card PIN is dirty.

4. Connect the card to the computer with a UHS-II card reader. If the card is

recognized by computer, check if the SD Formatter tool works normal. If you can

format successfully, insert the card into the camera to check if the card works. If you

cannot format the card, suggest contacting Lexar Technical Support for RMA

process.

Q&A

1667x UHS-II Cards

SILVER Series

Q&A 3 - Not recognized on computer

1. When inserting an SD card via UHS-II Card Reader or natively via the SD slot in

your laptop or desktop computer, make sure that the metal contacts face down and

point toward the computer. Do not force the media into the SD card slot, as this

might cause damage.

2. If you insert your card and it does not mount, remove the card and insert it again.

Sometimes the SD card will not mount properly if you insert the card too slowly or

too quickly. If the card still won't mount, you might need to reformat your SD card.

Please refer to the following guide to reformat an SD card on MAC:

https://support.apple.com/en-gb/guide/disk-utility/dskutl14079/mac

3. Connect the card to a computer with a UHS-II card reader. If the connection works

fine, check if the SD Formatter tool works normal. If you can format successfully,

insert the card into the camera to check if the card works. If you cannot format the

card, suggest contacting Lexar Technical Support for RMA process.

Q&A 4 –Why is my SD card not showing its full capacity?

1. Actual usable memory capacity may vary. 1GB equals 1 billion byte.

Standard capacity is not equal to the actual usable capacity. Since the capacity of

flash memory products is mostly calculated according to 1MB=1000KB,

1GB=1000MB, the operating system uses the binary algorithm, 1MB=1024KB,

1GB=1024MB. Therefore, there will be a difference between the actual usable

capacity and advertised capacity on the flash memory products. The actual capacity

is about 90% of the full capacity, and that is normal. For instance, the standard

capacity is 32GB, the actual capacity should be about 28.8GB. The standard

capacity is 64GB, the actual capacity should be about 57.7GB.

2. Some of the capacity is used for formatting and store specific functions, including

flash memory optimizations that maximize product performance and life, so users

cannot use this capacity to store files.

3. Check the card through a computer: you can check the disk management on the

computer. If it shows no allocation space, please delete the allocated one and format

the card with an SD Formatter tool. If you cannot format the card, suggest contacting

Lexar Technical Support for RMA process.

2000x UHS-II Cards

GOLD Series

Q&A

1667x UHS-II Cards

SILVER Series

Q&A 5 - Speed slow on camera:

1. It’s important to choose the right card for your camera. Please refer to the Lexar

Compatibility Guide on web guidelines or your device’s user manuals to choose the

right card for your camera and applications. If you choose an unsuitable card, it will

cause the continuous shooting/high-bit video recording to prompt the card slowly

and data loss, etc.

2. Confirm the shooting mode and check if the card write speed meets the

requirements, especially when recording with high frame rate/RAW/ slow-motion

modes. If not, lower the shooting mode or replace the card with a high-speed

memory card.

3. Confirm the device card slot protocol: Some devices [for example, SONY A7 III]

have two SD card slots, UHS-I and UHS-II. If the UHS-II card is inserted into the

UHS-I card slot of the device, the speed of the UHS-II card will not reach its

performance.

4. Please format and clear data before using the camera.

a) Format the card on the camera.

b) It is strongly recommended to use the SD Memory Card Formatter to format

rather than using formatting tools provided with individual operating systems.

In general, formatting tools provided with operating systems can format

various storage media including SD Cards, but it may not be optimized for SD

Cards, and it may result in lower performance.

https://www.sdcard.org/downloads/formatter/

Q&A 6 - About the speed test

1. Select a test environment that matches the card specs. For example, SD UHS-II

needs to use UHS-II card reader instead of UHS-I, and the USB interface of the

computer need to be USB 3.1 interface.

2. It is recommended to format the card in low-speed mode, then use

CrystalDiskMark/ATTO test speed software

https://crystalmark.info/en/software/crystaldiskmark/#google_vignette to achieve

spec performance. It is recommended to use overwrite format through SD Memory

Card Formatter to format the card or to use normal format (deselect quick format

mode) to format the card, then use speed test software like CrystalDiskMark/ATTO

to verify the performance.

3. When use on MAC: Mac Studio introduced in 2022, MacBook Pro introduced in

2021, iMac introduced in 2020, and iMac Pro have the SD card slot to support UHS-

II that can get the maximize Lexar® Professional 1667x UHS-II Card SILVER Series

performance.

2000x UHS-II Cards

GOLD Series

Q&A

1667x UHS-II Cards

SILVER Series

Q&A 7 - How do I recover missing or deleted files on my memory card?

Lexar recommends using the Lexar Recovery Tool. You can download the Tool

at https://www.lexar.com/en/download_cat/recovery_tool. Please refer to the Lexar

Recovery Tool Quick Start Guide for instructions.

Disclaimer: Lexar does not guarantee to recover any of your missing or deleted files. Lexar assumes no

liability for damage to the customer’s equipment or data caused by the use or misuse of the format

functions.

2000x UHS-II Cards

GOLD Series

Q&A

1667x UHS-II Cards

SILVER Series

I. Additional tips for card health

1. When using the card on a different camera, format the card on the new camera or

through the card reader. Please back up the data in the card before formatting.

2. Do not remove the card while data is being written to the card to avoid incomplete

data capture.

3. Do not pull out or insert the card while the power is on, to avoid damage to the card

or loss of data.

4. If your device gets too warm, please pause the shooting process until your device

cools down. This will keep your device within an acceptable operating temperature.

a) For environment temperature, please refer to the high temperature standard of

the meteorological station.

b) For the product temperature, if the high temperature warning appears in the

camera shooting display, please pause the shooting process until your device

cools down.

II. Always use a card reader

When reading or transferring content to your computer we recommend using a

matching an UHS-I or UHS-II card reader that matched your card performance. We also

recommend using a Lexar Card Reader for additional compatibility as 3rd party readers

may not meet the rated specs as defined by Lexar products.

1667x UHS-II Cards

SILVER Series

Useful Tips

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Lexar Lagerung Handbücher

Lexar

Lexar ECHO SE BACKUP DRIVE - DATASHEET REV B Bedienungsanleitung

Lexar

Lexar GAMING MEMORY STICK M2 - DATASHEET REV A Bedienungsanleitung

Lexar

Lexar PLATINUM II SDHC CARD - DATASHEET REV B Bedienungsanleitung

Lexar

Lexar 233X COMPACT FLASH - DATASHEET REV B Bedienungsanleitung

Lexar

Lexar PLATINUM II MEMORY STICK PRO DUO - DATASHEET REV... Bedienungsanleitung

Lexar

Lexar JUMPDRIVE S50 Bedienungsanleitung

Lexar

Lexar 400X COMPACTFLASH CARD Bedienungsanleitung

Lexar

Lexar USB FLASH DRIVE Bedienungsanleitung

Lexar

Lexar JUMPDRIVE SECURE II PLUS - DATASHEET REV A Bedienungsanleitung

Lexar

Lexar JUMPDRIVE S50 Bedienungsanleitung

Lexar

Lexar 133X SDHC CARD - DATASHEET REV E Bedienungsanleitung

Lexar

Lexar MOBILE MICROSD - DATASHEET REV A Bedienungsanleitung

Lexar

Lexar JUMPDRIVE FIREFLY Bedienungsanleitung

Lexar

Lexar VIDEO SDHC Bedienungsanleitung

Lexar

Lexar HIGH-SPEED MOBILE MICRO SDHC Bedienungsanleitung

Lexar

Lexar 600X COMPACTFLASH Bedienungsanleitung

Lexar

Lexar ECHO MX Bedienungsanleitung

Lexar

Lexar DS-SDHC-133-381 Bedienungsanleitung

Lexar

Lexar ECHO ZX Bedienungsanleitung

Lexar

Lexar SD HIGH-SPEED CARD - DATASHEET REV B Bedienungsanleitung

Lexar

Lexar JumpDrive Trio Bedienungsanleitung

Lexar

Lexar MOBILE MICROSDHC - DATASHEET REV B Bedienungsanleitung

Lexar

Lexar FULL-HD VIDEO - DATASHEET REV C Bedienungsanleitung

Lexar

Lexar Platinum II Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung