Lexmark X746 Bedienungsanleitung
Copy guide
Note: You can load paper sizes in short‑edge‑first orientation. For more information, see the “Supported paper sizes, types,
and weights” section in the User's Guide.
Making a quick copy
1Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Notes:
•When loading a document into the ADF, adjust the paper guides.
•Make sure the size of the original document and the copy paper size are the same. Failure to set the proper size may
result in a cropped image.
•Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
2From the printer control panel, press to start copying.
Copying using the ADF
1Load an original document faceup, short edge first into the ADF.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
2Adjust the paper guides.
3From the home screen, navigate to:
Copy > change the copy settings > Copy It
Copying using the scanner glass
1Place an original document facedown on the scanner glass in the upper left corner.
2From the home screen, navigate to:
Copy > change the copy settings > Copy It
3If you have more pages to scan, then place the next document on the scanner glass, and then touch Scan the Next Page.
4Touch Finish the Job to return to the home screen.
Understanding the copy options
Copy from
This option opens a screen where you can enter the paper size of the original document.
•Touch a paper size that matches the original document.
•Touch Mixed Sizes to copy an original document that contains mixed paper sizes with the same width.
•Touch Auto Size Sense to allow the scanner to automatically determine the size of the original document.
Copy guide
Page 1 of 4
Copy to
This option opens a screen where you can enter the paper size and type on which your copies will be printed.
•Touch the paper size and type that matches the paper loaded.
•If the settings for “Copy from” and “Copy to” are different, then the printer automatically adjusts the Scale setting to
accommodate the difference.
•If the paper type or size that you want to copy onto is not loaded in one of the trays, then touch Manual Feeder, and manually
load the paper in the multipurpose feeder.
•When “Copy to” is set to Auto Size Match, each copy matches the paper size of the original document. If a matching paper
size is not in one of the trays, then Paper size not found appears and prompts to load a paper in a tray or multipurpose
feeder.
Copies
This option allows you to set the number of copies to be printed.
Scale
This option creates an image from your copy that is proportionally scaled anywhere between 25% and 400%. Scale can also be
set for you automatically.
•When you want to copy from one size of paper to another, such as from legal‑size to letter‑size paper, setting the “Copy
from” and “Copy to” paper sizes automatically changes the scale to keep all the original document information on your copy.
•Touch the left arrow to decrease the value by 1%; touch the right arrow to increase the value by 1%.
•Hold your finger on an arrow to make a continuous increment change.
•Hold your finger on an arrow for two seconds to cause the pace of the change to accelerate.
Darkness
This option adjusts how light or dark your copies will turn out in relation to the original document.
Sides (Duplex)
Use this option to select duplex settings. You can print copies on one or two sides, make two-sided copies (duplex) of two-sided
original documents, make two-sided copies from one-sided original documents, or make one-sided copies (simplex) from two-
sided original documents.
Collate
This option keeps the pages of a print job stacked in sequence when printing multiple copies of the document. The factory default
setting for Collate is on; the output pages of your copies will be ordered (1,2,3) (1,2,3) (1,2,3). If you want all the copies of each
page to remain together, turn Collate off, and your copies will be ordered (1,1,1) (2,2,2) (3,3,3).
Content
This option lets you set the original document type and source.
Choose content type from Text, Text/Photo, Photo, or Graphics.
•Text—Use when the content of the original document is mostly text or line art.
•Graphics—Use when the original document is mostly business‑type graphics such as pie charts, bar charts, and animations.
Copy guide
Page 2 of 4
•Text/Photo—Use when the original document is a mixture of text, graphics, and photos.
•Photo—Use when the original document is mostly a photo or an image.
Choose content source from Color Laser, Black/White Laser, Inkjet, Photo/Film, Magazine, Newspaper, Press, or Other.
•Color Laser—Use when the original document was printed using a color laser printer.
•Black/White Laser—Use when the original document was printed using a mono laser printer.
•Inkjet—Use when the original document was printed using an inkjet printer.
•Photo/Film—Use when the original document is a photo from film.
•Magazine—Use when the original document is from a magazine.
•Newspaper—Use when the original document is from a newspaper.
•Press—Use when the original document was printed using a printing press.
•Other—Use when the original document was printed using an alternate or unknown printer.
Color
This option enables or disables color for the scanned image.
Advanced Options
Touching the Advanced Options button opens a screen where you can change the following settings:
•Advanced Duplex—Use to specify the document orientation, whether documents are one-sided or two-sided, and how
documents are bound.
Note: Some Advanced Duplex options are available only on select printers.
•Advanced Imaging—Use to change or adjust Auto Center, Background Removal, Color Balance, Color Dropout, Contrast,
Mirror Image, Negative Image, Scan Edge to Edge, Shadow Detail, Sharpness, and Temperature settings before you copy the
document.
•Create Booklet—Use to create a booklet. You can choose between 1‑sided and 2‑sided.
Note: This option appears only when a print duplexer and printer hard disk are installed.
•Cover Page Setup—Use to set copy cover page and booklet cover page.
•Custom Job—Use to combine multiple scanning jobs into a single job.
•Edge Erase—Use to eliminate smudges or information around the edges of a document. You can choose to eliminate an equal
area around all four sides of the paper, or pick a particular edge. Edge Erase will erase whatever is within the area selected,
leaving nothing on that portion of the scan.
•Header/Footer—Use to turn on Date/Time, Page number, Bates number, or Custom text, and prints them in the specified
header or footer location.
•Margin Shift—Use to increase the size of the margin of a specified distance by shifting the scanned image. This can be useful
in providing space to bind or hole-punch copies. Use the increase or decrease arrows to set how much of a margin you want.
If the additional margin is too large, then the copy will be cropped.
•Overlay—Use to create a watermark (or message) that overlays the content of your copy. You can choose from Urgent,
Confidential, Copy, and Draft, or you can enter a custom message in the ”Enter custom text” field. The word you pick will
appear, faintly, in large print across each page.
Note: A custom overlay can also be created by your system support person. When a custom overlay is created, a button
with an icon of that overlay will be available.
Copy guide
Page 3 of 4
•Paper Saver—Use to print two or more sheets of an original document together on the same page. Paper Saver is also called
N-up printing. The N stands for Number. For example, 2-up would print two pages of your document on a single page, and
4-up would print four pages of your document on a single page. Touching Print Page Borders adds or removes the outline
border surrounding the original document pages on the output page.
•Separator Sheets—Use to place a blank piece of paper between copies, pages, or print jobs. The separator sheets can be
drawn from a tray that contains a type or color of paper that is different from the paper your copies are printed on.
Save As Shortcut
This option allows the current settings to be saved as a shortcut by assigning a number.
Copy guide
Page 4 of 4
Andere Handbücher für X746
11
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Lexmark Multifunktionsdrucker Handbücher
Lexmark
Lexmark Prospect Pro205 Bedienungsanleitung
Lexmark
Lexmark XC9225 Bedienungsanleitung
Lexmark
Lexmark MB790MFP Bedienungsanleitung
Lexmark
Lexmark X5470 Bedienungsanleitung
Lexmark
Lexmark Xs463de - Mono Laser Mfp P/C/S 40Ppm 1200X Bedienungsanleitung
Lexmark
Lexmark MX710 Series Bedienungsanleitung
Lexmark
Lexmark X73 - X 73 Color Inkjet Bedienungsanleitung
Lexmark
Lexmark W01 Bedienungsanleitung
Lexmark
Lexmark S410 series Bedienungsanleitung
Lexmark
Lexmark 20R1000 - X 6650 Color Inkjet Montage- und Wartungsanleitung
Lexmark
Lexmark X215 MFP Bedienungsanleitung
Lexmark
Lexmark CX417de Bedienungsanleitung
Lexmark
Lexmark CX510de Bedienungsanleitung
Lexmark
Lexmark X642E Bedienungsanleitung
Lexmark
Lexmark 5400 Series Handbuch
Lexmark
Lexmark 4600MFP Bedienungsanleitung
Lexmark
Lexmark C780 Betriebsanleitung
Lexmark
Lexmark 19Z0200 - X 860de 4 B/W Laser Betriebsanleitung
Lexmark
Lexmark X2470 Bedienungsanleitung
Lexmark
Lexmark X734DE Bedienungsanleitung
Beliebte Multifunktionsdrucker Handbücher anderer Marken
Triumph Adler
Triumph Adler DC 2016 Handbuch
Epson
Epson WorkForce WF-2510 Benutzerhandbuch
Epson
Epson Stylus Scan 2000 Installations- und Betriebshandbuch
Epson
Epson PictureMate Snap PM 240 Bedienungsanleitung
Konica Minolta
Konica Minolta bizhub C35 Bedienungsanleitung
Brother
Brother MFC-J430w Bedienungsanleitung
Brother
Brother Business Smart MFC-J4510dw Bedienungsanleitung
Epson
Epson Stylus CX8400 Series Bedienungsanleitung
Oce
Oce VarioLink 5022 Bedienungsanleitung
Copystar
Copystar CS 4551ci Bedienungsanleitung
Konica Minolta
Konica Minolta Magicolor 4650EN Bedienungsanleitung
Brother
Brother MFC-9840CDW Bedienungsanleitung