Lexmark 650dn - T B/W Laser Printer Technisches Handbuch

Information guide

Help menu

The Help menu consists of a series of Help pages that are stored in the printer as PDFs. They contain information about using

the printer and performing printing tasks.

English, French, German, and Spanish translations are stored in the printer. Other translations are available on the Software

and Documentation CD.

Menu item Description

Print All Prints all the guides

Print Quality Provides information about solving print quality issues

Printing Guide Provides information about loading paper and other speciality media

Media Guide Provides a list of the paper sizes supported in trays, drawers, and feeders

Print Defects Provides information about resolving print defects

Menu Map Provides a list of the printer control panel menus and settings

Information Guide Provides help in locating additional information

Connection Guide Provides information about connecting the printer locally (USB) or to a network

Moving Guide Provides instructions for safely moving the printer

Supplies Guide Provides part numbers for ordering supplies

Setup

sheet

The Setup sheet packaged with the printer provides information about setting up the printer.

Software and Documentation

The Software and Documentation CD packaged with the printer includes a User's Guide. The User's Guide provides information

about loading paper, printing, ordering supplies, troubleshooting, clearing jams, and maintaining the printer.

Additional language support

The User's Guide, Setup sheet, and Help pages are also available in other languages on the Software and Documentation CD.

Information guide

Page 1 of 42

Connection guide

Windows instructions for a locally attached printer

Before installing printer software for Windows

A locally attached printer is a printer connected to a computer using a USB cable or parallel cable. When setting up this type

of printer with a USB cable, install the printer software before connecting the USB cable. For more information, see the setup

documentation.

The SoftwareandDocumentation CD can be used to install the necessary printer software on most Windows operating systems.

Note: If the operating system is not supported by the Software and Documentation CD, the Add Printer Wizard must be used.

Updates for the printer software may be available on the Lexmark Web site at www.lexmark.com.

Installing software using the CD

Using the Software and Documentation CD, you can install printer software for the following operating systems:

•Windows Server 2008

•Windows Vista

•Windows Server 2003

•Windows XP

•Windows 2000

1Insert the Software and Documentation CD. Wait for the Welcome screen to appear.

If the Welcome screen does not appear after a minute, do one of the following:

In Windows Vista:

aClick .

bIn the Start Search box, type D:\setup.exe, where Dis the letter of your CD or DVD drive.

In Windows XP and earlier:

aClick Start.

bClick Run.

cType D:\setup.exe, where Dis the letter of your CD or DVD drive.

2Press Enter.

3Select Install Printer and Software.

4Select Suggested, and then click Next.

5Select Local Attach, and then click Next.

The printer software is copied to your computer.

6Connect the USB or parallel cable, and then turn on the printer.

The Plug and Play screen appears, and a printer object is created in the Printers folder.

Connection guide

Page 2 of 42

Installing software using the Add Printer Wizard

You can install printer software for the following operating systems:

•Windows 98 First Edition (USB not supported)

•Windows 95 (USB not supported)

1Insert the Software and Documentation CD.

If the CD automatically starts, click Exit.

2Click Start Settings Printers, and then click Add Printer to start the Add Printer Wizard.

3When prompted, select to install a local printer, and then click Have Disk.

4Specify the location of the printer software. The path should be similar to D:\Drivers\Print\Win_9xMe\, where

Dis the letter of your CD or DVD drive.

5Click OK.

Windows instructions for network attached printers

What is network printing?

In Windows environments, network printers can be configured for direct printing or shared printing. Both network printing

methods require the installation of printer software and the creation of a network port.

Printing method Example

IP printing

•Printer is connected directly to the network using a network cable, such as an Ethernet

cable.

•Printer software is typically installed on each network computer.

Shared printing

•Printer is connected to one of the computers on the network using a local cable, such

as a USB or parallel cable.

•Printer software is installed on the computer attached to the printer.

•During software installation, the printer is set up to be “shared” so that other network

computers can print to it.

Installing software for direct IP printing

1Insert the Software and Documentation CD. Wait for the Welcome screen to appear.

If the Welcome screen does not appear after a minute, do one of the following:

In Windows Vista:

aClick .

bIn the Start Search box, type D:\setup.exe, where Dis the letter of your CD or DVD drive.

Connection guide

Page 3 of 42

In Windows XP and earlier:

aClick Start.

bClick Run.

cType D:\setup.exe, where Dis the letter of your CD or DVD drive.

2Press Enter.

3Select Install Printer and Software.

4Select Suggested, and then click Next.

Note: Select Custom instead of Suggested to select the components you want to install.

5Select Network Attach, and then click Next.

6Select the printer model you are installing.

The printer is automatically discovered on the network, and an IP address is automatically assigned.

7From the list of discovered printers, select the one you want to print to.

Note: If the printer does not appear in the list, click Add Port, and then follow the instructions on the screen.

8Click Finish to complete the installation.

9Click Done to exit the installer.

Installing optional printer software

If you want to use any of the other programs available on the Software and Documentation CD, install them by following the

Custom install path:

1Insert the Software and Documentation CD. Wait for the Welcome screen to appear.

If the Welcome screen does not appear after a minute, do one of the following:

In Windows Vista:

aClick .

bIn the Start Search box, type D:\setup.exe, where Dis the letter of your CD or DVD drive.

In Windows XP and earlier:

aClick Start.

bClick Run.

cType D:\setup.exe, where Dis the letter of your CD or DVD drive.

2Press Enter.

3Select Install Printer and Software.

4Select Custom, and then click Next.

5Select Select Components, and then click Next.

6Specify whether to install software on the Local computer or on a Remote computer on your network, and then click

Next.

7Click the +boxes under Select Components to view the list of available software.

Connection guide

Page 4 of 42

8Select the check box next to each program you want to install, and then click Finish.

The software is copied to the computer.

9Connect the USB or parallel cable, and then turn the printer on.

The Plug and Play screen appears, and a printer object is created in the Printers folder.

Macintosh instructions for a locally attached printer

Before installing printer software for Macintosh

A locally attached printer is a printer connected to a computer using a USB cable. When setting up this type of printer, install

the printer software before connecting the USB cable. For more information, see the setup documentation.

The Software and Documentation CD can be used to install the necessary printer software.

Note: A PPD for the printer is also available in a downloadable software package on the Lexmark Web site at

www.lexmark.com.

Creating a print queue

For local printing, you need to create a print queue:

1Install a PostScript Printer Description (PPD) file on the computer. A PPD file provides detailed information to the Macintosh

computer about the capabilities of the printer.

aInsert the Software and Documentation CD.

bDouble-click the installer package for the printer.

cFrom the Welcome screen, click Continue, and then click Continue again after viewing the Readme file.

dClick Continue after viewing the license agreement, and then click Agree to accept the terms of the agreement.

eSelect a Destination, and then click Continue.

fFrom the Easy Install screen, click Install.

gEnter the user password, and then click Okay. All the necessary software is installed on the computer.

hClick Close when installation is complete.

2Do one of the following:

•In Mac OS X version 10.5:

aFrom the Apple menu, choose System Preferences.

bClick Print & Fax.

•In Max OS X version 10.4 and earlier:

aFrom the Go menu, choose Applications.

bDouble-click Utilities, and then double-click Print Center or Printer Setup Utility.

3Verify that the print queue was created:

•If the USB-attached printer appears in the Printer list, then the print queue was successfully created.

•If the USB-attached printer does not appear in the Printer list, then make sure the USB cable is properly connected and

the printer is turned on, and then check the Printer list again.

Connection guide

Page 5 of 42

Mac instructions for network-attached printers

Installing software for network printing

To print to a network printer, each Macintosh user must install a custom PostScript Printer Description (PPD) file and create a

print queue in Print & Fax, Print Center, or Printer Setup Utility.

1Install a PPD file on the computer:

aInsert the Software and Documentation CD.

bDouble-click the installer package for the printer.

cFrom the Welcome screen, click Continue, and then click Continue again after viewing the Readme file.

dClick Continue after viewing the license agreement, and then click Agree to accept the terms of the agreement.

eSelect a Destination, and then click Continue.

fFrom the Easy Install screen, click Install.

gEnter the user password, and then click OK.

All the necessary software is installed on the computer.

hClick Close when installation is complete.

2Create a print queue:

•For IP printing:

In Mac OS X version 10.5

aFrom the Apple menu, choose System Preferences.

bClick Print & Fax.

cClick +.

dSelect the printer from the list.

eClick Add.

In Mac OS X version 10.4 and earlier

aFrom the Go menu, choose Applications.

bDouble-click Utilities.

cDouble-click Printer Setup Utility or Print Center.

dFrom the Printer List, click Add.

eSelect the printer from the list.

fClick Add.

•For AppleTalk printing:

In Mac OS X version 10.5

aFrom the Apple menu, choose System Preferences.

bClick Print & Fax.

cClick +.

dClick AppleTalk.

eSelect the printer from the list.

fClick Add.

In Mac OS X version 10.4 and earlier

aFrom the Go menu, choose Applications.

bDouble-click Utilities.

Connection guide

Page 6 of 42

cDouble-click Print Center or Printer Setup Utility.

dFrom the Printer List, click Add.

eChoose the Default Browser tab.

fClick More Printers.

gFrom the first pop-up menu, choose AppleTalk.

hFrom the second pop-up menu, select Local AppleTalk zone.

iSelect the printer from the list.

jClick Add.

Installing other software for Macintosh

The following Macintosh utilities can be found on the Software and Documentation CD:

•Printer File Loader

•Printer Status

•Auto Updater

•Printer Settings

The Software and Utilities documentation is copied to the Macintosh hard disk during the printer installation process.

Connection guide

Page 7 of 42

Media guide

The printer supports the following paper and other specialty media sizes. Select custom sizes up to the maximum specified

for the Universal setting.

Supported paper sizes, types, and weights

The following tables provide information on standard and optional paper sources, the types of paper they support, and

capacities.

Note: For an unlisted paper size, select the closest larger listed size.

Paper sizes supported by the printer

Paper size Dimensions 250- or

550-sheet trays

(standard or

optional)

Optional

2000-sheet tray

Multipurpose

feeder

Duplex unit

A4 210 x 297 mm

(8.3 x 11.7 in.)

A5 148 x 210 mm

(5.8 x 8.3 in.)

A61,2 105 x 148 mm

(4.1 x 5.8 in.)

X X X

JIS B5 182 x 257 mm

(7.2 x 10.1 in.)

Letter 216 x 279 mm

(8.5 x 11 in.)

Legal 216 x 356 mm

(8.5 x 14 in.)

Executive 184 x 267 mm

(7.3 x 10.5 in.)

Oficio1216 x 340 mm

(8.5 x 13.4 in.)

Folio1216 x 330 mm

(8.5 x 13 in.)

Statement1140 x 216 mm

(5.5 x 8.5 in.)

X X

1This size appears in the Paper Size menu only when the paper source does not support size sensing or when size sensing

is turned off.

2Only the standard output bin supports this size.

3This size setting formats the page for 216 x 356 mm (8.5 x 14 in.) unless the size is specified by the software application.

4To support duplexing, the Universal width must be between 148 mm (5.8 in) and 216 mm (8.5 in); Universal length must

be between 182 mm (7.2 in) and 356 mm (14 in).

Media guide

Page 8 of 42

Paper size Dimensions 250- or

550-sheet trays

(standard or

optional)

Optional

2000-sheet tray

Multipurpose

feeder

Duplex unit

Universal2,3 138 x 210 mm

(5.5 x 8.3 in.) up to

216 x 356 mm

(8.5 x 14 in.)

X X

70 x 127 mm

(2.8 x 5 in.) up to

216 x 356 mm

(8.5 x 14 in.)

X X X

148 x 182 mm

(5.8 x 7.7 in.) up to

216 x 356 mm

(8.5 x 14 in.)

7 3/4 Envelope

(Monarch)

98 x 191 mm

(3.9 x 7.5 in.)

X X X

9 Envelope 98 x 225 mm

(3.9 x 8.9 in.)

X X X

10 Envelope 105 x 241 mm

(4.1 x 9.5 in.)

X X X

DL Envelope 110 x 220 mm

(4.3 x 8.7 in.)

X X X

Other Envelope 98 x 162 mm

(3.9 x 6.4 in.) to

176 x 250 mm

(6.9 x 9.8 in.)

X X X

1This size appears in the Paper Size menu only when the paper source does not support size sensing or when size sensing

is turned off.

2Only the standard output bin supports this size.

3This size setting formats the page for 216 x 356 mm (8.5 x 14 in.) unless the size is specified by the software application.

4To support duplexing, the Universal width must be between 148 mm (5.8 in) and 216 mm (8.5 in); Universal length must

be between 182 mm (7.2 in) and 356 mm (14 in).

Note: An optional 250-sheet Universally Adjustable Tray is available for sizes smaller than A5, such as index cards.

Media guide

Page 9 of 42

Paper types and weights supported by the printer

The printer engine supports 60–176 g/m2(16–47 lb) paper weights. The duplex unit supports 63–170 g/m2(17–45 lb) paper

weights.

Paper type 250- or 550-sheet

trays (standard or

optional)

Optional 2000-sheet

tray

Multipurpose feeder Duplex unit

Paper

•Plain

•Bond

•Colored

•Custom

•Letterhead

•Light

•Heavy

•Preprinted

•Rough/Cotton

•Recycled

Card stock

Envelopes X X X

Labels 1

•Paper

•Vinyl

Transparencies

1Printing labels requires a special label fuser cleaner which prevents duplexing. The label fuser cleaner is included with the

special cartridge required for label applications.

Paper types and weights supported by the finisher

Use this table to determine the possible output destinations of print jobs which use supported paper types and weights. The

paper capacity of each output bin is listed in parentheses. Paper capacity estimations are calculated based on 75 g/m2(20 lb)

paper.

Media guide

Page 10 of 42

Andere Handbücher für 650dn - T B/W Laser Printer

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Lexmark Drucker Handbücher

Lexmark

Lexmark M3150 Kurzanleitung

Lexmark

Lexmark M3250 Bedienungsanleitung

Lexmark

Lexmark X945E Bedienungsanleitung

Lexmark

Lexmark Optra T522 Bedienungsanleitung

Lexmark

Lexmark MS810n Bedienungsanleitung

Lexmark

Lexmark C 540n Bedienungsanleitung

Lexmark

Lexmark E350d Bedienungs- und Sicherheitshinweise

Lexmark

Lexmark MS810de Bedienungsanleitung

Lexmark

Lexmark X203N series Betriebsanleitung

Lexmark

Lexmark PRO700 Bedienungsanleitung

Lexmark

Lexmark C524n Bedienungsanleitung

Lexmark

Lexmark C530 series, C532 series, C534 series Kurzanleitung

Lexmark

Lexmark T 430 Gebrauchs- und Pflegehandbuch

Lexmark

Lexmark Z600 Bedienungsanleitung

Lexmark

Lexmark C925de Bedienungsanleitung

Lexmark

Lexmark C950 Series Kurzanleitung

Lexmark

Lexmark S310 Series Bedienungsanleitung

Lexmark

Lexmark CS921 Bedienungsanleitung

Lexmark

Lexmark 13P0150 - C 750dtn Color Laser Printer Bedienungsanleitung

Lexmark

Lexmark MS710 Series Bedienungsanleitung

Lexmark

Lexmark T65X Bedienungsanleitung

Lexmark

Lexmark MS617 Bedienungsanleitung

Lexmark

Lexmark C910 Finisher Produktinformationsblatt

Lexmark

Lexmark C910 Finisher Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung