Lexmark T630 - Printer - B/w Bedienungsanleitung

Page 1 of 8

Quick Reference

Operator panel

Press Menu to:

•Enter the menus from the Ready state.

•Scroll through menus or values.

•Increase or decrease a numerical value.

•Display the Job Menu while the printer is busy.

Press Select to:

•Select the item on the second line of the display.

•Save the selection as a new default setting.

Press Return to return to the previous menu level.

Press Go to:

•Exit printer menus and return to the Ready state.

•Clear messages.

Press Stop to temporarily stop all print activity without losing data.

Printing this quick reference

1Press Menu until you see Help Menu, and then press Select.

2When you see Quick Reference, press Select. The Quick Reference prints.

Note: This Quick Reference is also included on the Publications CD that shipped with your printer.

1Menu 2Select 3

Return 4

Go 5Stop 6

Page 2 of 8

Operator panel menus

Paper Menu

Paper Source

Paper Size

Paper Type

Custom Types

Universal Setup

Output Bin

Configure Bins

Overflow Bin

Assign Type/Bin

Substitute Size

Configure MP

Envelope Enhance

Paper Texture

Paper Weight

Paper Loading

Finishing Menu

Duplex

Duplex Bind

Copies

Blank Pages

Collation

Separator Sheets

Separator Source

Multipage Print

Multipage Order

Multipage View

Multipage Border

Staple Job

Staple Prime Src

Offset Pages

Utilities Menu

Print Menus

Print Net <x> Setup

Print Fonts

Print Directory

Factory Defaults

Format Flash

Defragment Flash

Format Disk

Job Acct Stat

Hex Trace

Quality Menu

Print Resolution

Toner Darkness

PictureGrade

Job Menu

Confidential Job

Held Jobs

Cancel Job

Reset Printer

Print Buffer

Prime Stapler

Reset Active Bin

Setup Menu

Printer Language

Power Saver

Resource Save

Download Target

Print Timeout

Wait Timeout

Auto Continue

Jam Recovery

Page Protect

Display Language

Alarm Control

Toner Alarm

Staple Alarm

Job Accounting

Serial Menu

PCL SmartSwitch

PS SmartSwitch

NPA Mode

Serial Buffer

Job Buffering

Serial Protocol

Robust XON

Baud

Data Bits

Parity

Honor DSR

Network Menu

PCL SmartSwitch

PS SmartSwitch

NPA Mode

Network Buffer

Job Buffering

Network <x> Setup

Mac Binary PS

USB Menu

PCL SmartSwitch

PS SmartSwitch

NPA Mode

USB Buffer

Job Buffering

Mac Binary PS

PCL Emul Menu

Font Source

Font Name

Point Size

Pitch

Symbol Set

Orientation

Lines per Page

A4 Width

Tray Renumber

Auto CR after LF

Auto LF after CR

Parallel Menu

PCL SmartSwitch

PS SmartSwitch

NPA Mode

Parallel Buffer

Job Buffering

Advanced Status

Protocol

Honor Init

Parallel Mode 1

Parallel Mode 2

Help Menu

Quick Reference

PostScript Menu

Print PS Error

Font Priority

PDF Menu

Page 3 of 8

Printing confidential jobs

If you want to print a job that is personal or confidential, and you do not want anyone else to see it, the printer can

hold your job in memory until you arrive at the printer.

Note: This only works with custom printer drivers. These drivers are located on the drivers CD that

shipped with your printer.

To print a confidential job:

1In your word processor, spreadsheet, browser, or other application, select

File Print.

2Click Properties (or Options, Printer, or Setup depending on the application) to view the printer driver

settings.

3Click Help and refer to the topic “Confidential print” or “Print and hold.”Follow the instructions.

Note: If you send a large file to a shared network printer, it remains in the printer memory until you print

it. This could prevent others from printing. Retrieve your print jobs as soon as possible. To check the

amount of memory in your printer, see Printing a menu settings page.

4Go to the printer and use the operator panel to access your confidential print job:

aPress Menu until you see Job Menu, and then press Select.

bPress Menu until you see Confidential Job, and then press Select.

cPress Menu until you see your user name, and then press Select.

dEnter your four-digit personal identification number (PIN) using the numbered buttons on the operator panel. As you

enter your PIN, asterisks appear on the display.

ePress Menu until you see Print A Job, and then press Select. (Print All Jobs sends all jobs with the same user name

and PIN immediately to the printer.)

fPress Menu until you see the job you want to print, and then press Select.

gPress Go to send the job to the printer.

After the job prints, the job is deleted from printer memory and the printer returns to the Ready state.

Canceling a print job

To cancel a print job after it has started printing:

1Press Menu until you see Job Menu, and then press Select.

2Press Menu until you see Cancel Job, and then press Select.

Printing a menu settings page

To verify Paper Size and Paper Type settings, and check installed options and memory, print a menu settings

page:

1Press Menu until you see Utilities Menu, and then press Select.

2Press Menu until you see Print Menus, and then press Select. The menu settings page prints.

Page 4 of 8

Common printer messages

Message Actions

Change Tray x

The printer is

requesting a different

size or type of print

media than what is

loaded.

•Remove the currently loaded print

media from the specified tray, and

then load the requested print media.

•Press Select to clear the message

and print on the print media currently

loaded in the tray.

•Cancel the current job.

Load Manual

The printer is ready for

print media to be

inserted into the

multipurpose feeder.

•Load the multipurpose feeder with

the print media specified on the

second line of the display.

•Press Select or Go to ignore the

manual feed request and print on

print media already installed in one of

the trays.

•Cancel the current job.

Waiting

The printer has

received data to print

but is waiting for a

command or

additional data.

•Press Go to print the contents of the

buffer.

•Cancel the current job.

Not Ready

The printer is not

ready to process data.

Press Go to ready the printer to receive

jobs.

Flushing Buffer

The printer is

discarding the current

print job.

•Wait for the message to clear.

•Sometimes this message means the

driver data did not match what the

printer was expecting. If the situation

recurs, try printing from another

printer driver.

Page 5 of 8

Loading letterhead

Letterhead must be loaded differently depending on what options you have installed.

In a tray In the multipurpose

feeder

Without

finisher,

single-sided

printing

Without

finisher,

double-sided

printing

With finisher,

single-sided

printing

With finisher,

double-sided

printing

Page 6 of 8

Loading a tray

Load print media into any of the standard or optional trays. All trays are loaded the same way.

1Remove the tray.

2Squeeze the width guide tab and the width guide, and slide the guide to the far right side of the tray.

3Squeeze the length guide lever, and slide the length guide to the correct position for the size paper you are

4Place the print media into the tray with the recommended print side face down for single-sided printing and

face up for double-sided printing. Do not load print media above the load line.

5Squeeze the width guide tab and the width guide, and slide the width guide to the left until it lightly rests

against the edge of the paper stack.

Squeeze

Width

guide

Size indicators

Length

guide

Width guide

tab

Page 7 of 8

Loading the multipurpose feeder

1Push the lower release latch and open the multipurpose feeder door.

2Pull the metal bar out far enough to support your print media size.

3Slide the width guide to the far right.

4Place the print media in the multipurpose feeder and push it forward without forcing it.

5Slide the width guide to the left until it lightly touches the side of the print media.

Paper and transparencies Envelopes

Width

guide

Page 8 of 8

Accessing jam areas

You open doors and covers, remove trays, and remove options to access jam areas. The illustration shows the

location of sources and possible jam areas. Be sure to remove any print jobs from the standard bin before opening

the upper front door.

CAUTION: Floor-mounted configurations require additional furniture. You must use either a printer stand or

printer base if you are using a 2000-sheet drawer, a duplex unit and an input option, or more than

one input option. If you purchased a multifunction printer (MFP) that scans, copies, and faxes, you

may need additional furniture.

Warning: Do not attempt to clear any jam using tools or instruments. This may permanently damage the

printer.

27x Paper Jam

28x Paper Jam

Rear door of:

5-bin mailbox

Output expander

(high-capacity

output stacker

and finisher

not shown)

202 Paper Jam

Printer rear door

23x Paper Jam

Duplex rear door

200 Paper Jam

201 Paper Jam

Upper front door

250 Paper Jam

Lower front door

(down when envelope

feeder is installed)

24x Paper Jam

Standard input tray

23x Paper Jam

Duplex front access cover

(remove standard input tray)

24x Paper Jam

Paper trays

260 Paper Jam

Envelope feeder

Andere Handbücher für T630 - Printer - B/w

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Lexmark Drucker Handbücher

Lexmark

Lexmark MX6500e 6500e Service-Handbuch

Lexmark

Lexmark C4342 Bedienungsanleitung

Lexmark

Lexmark 20D0000 - X 340 MFP B/W Laser Montage- und Wartungsanleitung

Lexmark

Lexmark 25A0450 - C 736N Color Laser Printer Bedienungsanleitung

Lexmark

Lexmark C935 Series Bedienungsanleitung

Lexmark

Lexmark M1145 Bedienungsanleitung

Lexmark

Lexmark W820n Bedienungsanleitung

Lexmark

Lexmark 13P0150 - C 750dtn Color Laser Printer Bedienungsanleitung

Lexmark

Lexmark MS00321 - X 738de Color Laser Montage- und Wartungsanleitung

Lexmark

Lexmark C2335 Bedienungsanleitung

Lexmark

Lexmark CS510de Bedienungsanleitung

Lexmark

Lexmark Universal Driver Bedienungsanleitung

Lexmark

Lexmark MX6500e 6500e Service-Handbuch

Lexmark

Lexmark 4227 - Forms Printer B/W Dot-matrix Bedienungsanleitung

Lexmark

Lexmark E460DN - Taa Govt Compliant Bedienungsanleitung

Lexmark

Lexmark 22W0024 Bedienungsanleitung

Lexmark

Lexmark C920 SERIES Bedienungsanleitung

Lexmark

Lexmark 18H0500 - Z 54 Color Jetprinter Inkjet... Bedienungsanleitung

Lexmark

Lexmark P700 Bedienungsanleitung

Lexmark

Lexmark C910 Finisher Bedienungsanleitung

Lexmark

Lexmark 4098-001 Bedienungsanleitung

Lexmark

Lexmark 25C0010 - X 500n Color Laser Bedienungsanleitung

Lexmark

Lexmark Pinnacle Pro901 Montage- und Wartungsanleitung

Lexmark

Lexmark C910 Finisher Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung

IRA3D

IRA3D POETRY4 Bedienungsanleitung