Lexmark W820n Bedienungsanleitung

Lexmark™ W820

Quick Referenceck Reference

Loading the trays

1 Open the tray.

2 Slide the guides out of the way. Pull up on the right guide, and

press the lever on the back guide. (Trays 4 and 5 only have a

back guide.)

3 Place the print media against the front left corner of the tray.

Labels on the tray indicate paper size and orientation.

Note: Do not overload the trays. This can

cause print media jams. The label on the

back guide indicates the maximum stack

height.

4 Adjust the back and side guides so they lightly touch the

sides of the stack.

Loading the multipurpose feeder

Use the multipurpose feeder to print on special media that is not

already loaded in the trays.

The multipurpose feeder accepts plain paper, envelopes,

transparencies, card stock, and labels.

1 In your word processor, spreadsheet, browser, or other

application, select File Print.

2 Click Properties (or Options, Printer, or Setup depending

on the application) to view the printer driver settings.

3 Select MP Feeder from the Form Source list box.

4 Specify the size and type of your print media.

5 Click OK, and then send your print job as usual.

6 Go to the printer. A display message prompts you to load print

media.

7 Open the multipurpose feeder.

8 Slide the side guide to the back.

9 Pull out the extension guide so it supports the entire length of

the print media.

Note: Do not overload the multipurpose

feeder. This can cause print media jams.

The label on the guide indicates the

maximum stack height.

10 Place the print media along the front side of the multipurpose

feeder. Labels indicate paper size and orientation.

11 Push the print media gently into the printer.

12 Adjust the side guide so it lightly touches the side of the

stack.

13 Press Go.

Printing on special media

Envelopes

Your printer may have a multipurpose feeder, or it may have an

envelope feeder. Use either one for envelopes.

To load the envelope feeder:

1 Slide the guide out of the way.

2 Lift the envelope weight and hold it.

3 Place the envelopes along the right side of the envelope

feeder.

Load envelopes face down, with the flap up. Labels indicate

envelope size, orientation, and maximum stack height.

4 Lower the envelope weight.

5 Adjust the guide so it lightly touches the side of the stack.

Transparencies

You can use the multipurpose feeder or Tray 1 for transparencies.

Load transparencies just as you would any other print media.

Canceling a print job

To cancel a print job after it has started printing:

1 Press Menu until you see Job Menu, and then press Select.

2 Press Menu until you see Cancel Job, and then press Select.

➤

Multipurpose feeder

Envelope weight

Guide

Printed in U.S.A.

This document is printed on recycled paper. 3/01

E.C. 5B0000 P/N 12B0025

Printing a menu settings page

To verify Paper Size and Paper Type settings, and check installed

options and memory, print a menu settings page:

1 Press Menu until you see Utilities Menu, and then press

Select.

2 Press Menu until you see Print Menus, and then press

Select.

Printing confidential jobs

If you want to print a job that is personal or confidential, and you do

not want anyone else to see it, the printer can hold your job in

memory until you arrive at the printer.

Note: This only works with Lexmark W820 custom printer drivers.

These drivers can be found on the drivers CD that shipped

with your printer and on the Web at www.lexmark.com.

To a print confidential job:

1 In your word processor, spreadsheet, browser, or other

application, select File Print.

2 Click Properties (or Options, Printer, or Setup depending

on the application) to view the printer driver settings.

3 Click Help and refer to the topic confidential print or print and

hold. Follow the instructions.

4 Go to the printer when you are ready to retrieve your

confidential print job, and follow these steps:

aOn the operator panel, press Menu until you see

Confidential Job, and then press Select.

bPress Menu until you see your user name, and then press

Select.

cEnter your four-digit PIN using the numbered buttons on

the operator panel. As you enter your PIN, asterisks

appear on the display.

dPress Menu until you see Print A Job, and then press

Select. (Print All Jobs sends all jobs with the same user

name and PIN immediately to the printer.)

ePress Menu until you see the job you want to print, and

then press Select.

fPress Go to send the job to the printer.

After the job prints, the job is deleted from printer memory and the

printer returns to the Ready state.

Common printer messages

➤

Enter PIN

=****

1 Menu 2Select 3Return 4

Go 5Stop 6

Message Actions

Change Tray <x>

The printer is

requesting a different

size or type of print

media than what is

loaded.

• Remove the currently loaded print

media from the specified tray, and

then load the requested print media.

• Press Select to clear the message

and print on the media currently

loaded in the tray.

• Cancel the current job.

Load MP Feeder

The printer is ready for

print media to be

inserted into the

multipurpose feeder.

• Load the multipurpose feeder with the

print media specified on the second

line of the display.

• Press Select or Go to ignore the

manual feed request and print on print

media already installed in one of the

print media trays.

• Cancel the current job.

Check <source>

Paper Guide

The guide in the print

media source is set

incorrectly or the print

media is loaded

incorrectly.

• Move the guide to the proper position

or load the print media correctly.

Waiting

The printer has

received data to print

but is waiting for a

command or

additional data.

• Press Go to print the contents of the

buffer.

• Cancel the current job.

Not Ready

The printer is not

ready to process data.

•PressGo to ready the printer to

receive jobs.

Flushing Buffer

The printer is

discarding the current

print job.

• Wait for the message to clear.

• Sometimes this message means the

driver data did not match what the

printer was expecting. If the situation

recurs, try printing from another

Lexmark W820 printer driver

(Lexmark W820 PS3 or Lexmark

W820).

No Jobs Found.

Retry?

The PIN you entered

on the operator panel

does not match the

one you specified

when you sent the

print job.

•PressGo to reenter the PIN.

•PressReturn until the printer returns

to the Ready state.

Message Actions

Andere Handbücher für W820n

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Lexmark Drucker Handbücher

Lexmark

Lexmark 4098-001 Bedienungsanleitung

Lexmark

Lexmark Optra T522 Bedienungsanleitung

Lexmark

Lexmark E460dw Bedienungsanleitung

Lexmark

Lexmark 33S0300 - Mono Chrome Laser Printer Service-Handbuch

Lexmark

Lexmark S300 Bedienungsanleitung

Lexmark

Lexmark E120n Bedienungsanleitung

Lexmark

Lexmark C792 Family Bedienungsanleitung

Lexmark

Lexmark CS310 Series Handbuch

Lexmark

Lexmark 3300 Series Bedienungsanleitung

Lexmark

Lexmark X5100 Series Handbuch

Lexmark

Lexmark Infoprint 1332 Bedienungsanleitung

Lexmark

Lexmark Optra C Bedienungsanleitung

Lexmark

Lexmark C720 SERIES Betriebsanleitung

Lexmark

Lexmark C910 Finisher Bedienungsanleitung

Lexmark

Lexmark E350d - E B/W Laser Printer Bedienungsanleitung

Lexmark

Lexmark 810 Series Bedienungsanleitung

Lexmark

Lexmark X748dte Bedienungsanleitung

Lexmark

Lexmark Color Jetprinter 1020 Bedienungsanleitung

Lexmark

Lexmark C720 SERIES Bedienungsanleitung

Lexmark

Lexmark CS921 Bedienungsanleitung

Lexmark

Lexmark C720 SERIES Bedienungsanleitung

Lexmark

Lexmark 4039-1XX Bedienungsanleitung

Lexmark

Lexmark E 330 Originalbetriebsanleitung

Lexmark

Lexmark T420d Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung