LG AX310 Bedienungsanleitung

USER GUIDE AX310

Please read this manual carefully before operating your mobile

phone. Retain it for future reference.

ⓒ

LG and the LG logo are registered trademarks of LG

Group and its related entities. All other trademarks are the

property of their respective owners.

Part 15.21 statement

" Change or Modifications that are not expressly approved by the manufacturer could void

the user's authority to operate the equipment. “

Part 15.105 statement

This equipment has been tested and found to comply with the limits for a class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference or

television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Part 15 Class B Compliance

This device and its accessories comply with part15 of FCC rules.

Operation is subject to the following two conditions:

(1) This device & its accessories may not cause harmful interference.

(2) This device & its accessories must accept any interference received,

including interference that may cause undesired operation.

Body-worn Operation

This device has been tested for typical body-worn operations

with the distance of 0.79inches (2.0cm) from the user’s body.

To comply with FCC RF exposure requirements, a minimum separation distance

of 0.79inches(2.0cm) must be maintained from the user's body.

Additionally, Belt clips, holsters & other body-worn accessories may not contain

metallic components.

Installing the Battery

Remove the battery cover by sliding it downward followed by the arrow indicator. Align the

battery with the terminals near the top of the phone. Align the battery cover then slide it to the

right side until it clicks into place.

Removing the Battery

Turn the phone off. Slide the battery cover to left side and remove it. Use the opening near the

bottom of the battery to lift the battery out.

Charging the Battery

To use the charger provided with your phone:

Warning! Use only the charger provided with the phone. Using any charger other than the one

included with the AX310 may damage your phone or battery.

Note

It is important to fully charge the battery before initial use of the phone.

Notice

Please make sure that the LG logo faces down before inserting a charger, data cable, etc into the charger port

of your phone.

1. Plug the end of the adapter into the phone’s charger port and the other end into an

electrical outlet.

2. The charge time varies depending upon the battery level.

Battery Charge Level

The battery charge level is shown at the top right of the LCD screen. When the battery charge

level becomes low, the low battery sensor alerts you in three ways: sounding an audible tone,

blinking the battery icon, and displaying a warning message. If the battery charge level

becomes exceedingly low, the phone automatically switches off and any function in progress

is not saved.

Turning the Phone On and Off

Turning the Phone On

1. Install a charged battery or connect the phone to an external power source.

2. Press END for about 3 seconds until the LCD screen lights up.

Turning the Phone Off

1. Press END and hold until the display turns off.

Signal Strength

Call quality depends on the

Getting Star ted with Your Phone signal strength in your area. The signal strength is indicated

on the screen as the number of bars next to the signal strength icon

-- the more bars, the better the signal strength. If the signal quality is poor, move to an open

area. If you are in a building, the reception may be better near a window. Screen Icons To

see the icon glossary, go to Menu -> Settings -> Phone Info. -> Icon Glossary on your phone.

Making Calls

1. Make sure the phone is turned on. If not, press END for about 3 seconds.

2. Enter the phone number (include the area code if needed).

3. Press .lf the phone is locked, enter the lock code (the last 4 digits of your phone number by

default and it's changeable in Settings menu).

Note The call quality is also affected by the places where you are and weather conditions with RF

emission changes.

Note

If the phone is restricted, you can only dial phone numbers saved in the Emergency Numbers or

your Contact List. To turn off this function: Menu -> 9. Settings -> 3. Security -> Lock Code -> OK

-> 2. Restrictions -> 1. Calls -> 4. None -> OK

4. Press END to end the call.

Correcting Dialing Mistakes If you make a mistake while dialing a number, press BACK

once to erase the last digit entered, or hold down BACK for at least 2 seconds to go to the

standby mode.

Redialing Calls

1. Press TALK twice to redial the last number you dialed. The last 120 numbers (missed,

received, dialed) are stored in the call history list and you can also select any of these to redial.

Receiving Calls

1. When the phone rings or vibrates, press TALK to answer.

2. Press twice to end the call.

Tip

To choose answer options: Menu -> 9. Settings -> 4. Call Settings -> 1. Answer Options. Choose

from the

following options:

Flip Open/ Any Key/ Send Key

Only/ Auto Answer

Note

If you press or (the side keys), while the phone is ringing, the ringing or vibration is muted for that

call.

Quick Access to Convenient Features

Lock Mode

Sets your phone to require a 4-digit password in order to use the phone.

To quickly lock your phone press for three seconds. To cancel, press Left Soft Key Unlock,

enter the password and press .

Mute Function

The Mute Function is used during a phone call. To quickly activate Mute press Left Soft Key

Mute, then to cancel press Left Soft Key Unmute.

Volume Quick Adjustment

Use the side keys to adjust the ringer volume while in standby mode, and the earpiece volume

during a phone call. The upper key increases the volume and the lower key decreases the

volume.

Call Waiting

Your cellular service may offer call waiting. While a call is in progress, two beeps indicate

another incoming call. When call waiting is enabled, you may put the active call on hold while

you answer the other incoming call. Check with your cellular service provider for information

about this function.

Note

Until you change it, the default lock code/password is the last 4

digits of your phone number.

Note

Keypad Volume is adjusted through the Sound Volume menu:

Menu -> 9. Settings -> 1. Sound -> 2. Volume -> 2. Keypad

Quick Acces s to Convenient Features

1. Press TALK to receive a waiting call.

2. Press TALK again to switch between calls.

Caller ID

Caller ID displays the phone number or name of the incoming call. If the caller’s

identity is stored in Contacts, the name will appear along with the phone number.

Check with your service provider to ensure they offer this feature.

Speed Dialing

Speed dialing is a convenient feature that allows you to make phone calls quickly. A

number key can be assigned to a specific phone number. By pressing and holding

down a number key, your phone will recall the phone number associated from the

Contact List and display it briefly while simultaneously dialing that phone number for

you. Speed Dial Number 1 is set to Voice Mailbox by default and is unchangeable.

Dialing Single Digit Speed Dials (from 2 to 9)

Press and hold the Speed Dial number. OR Enter the Speed Dial number and press .

Dialing Double Digit Speed Dials (from 10 to 99)

Press the first digit and then press and hold the key of the second digit.

Enter the first and second digits and press .

Entering and Editing Information

Text Input

You can input and edit your Banner, Calendar, Contacts, Alarm Clock, Notepad, and

Messages.

Key Functions

Left Soft Key:

Press to scroll through the following text input modes:

T9Word(T9WORD/T9Word/T9word) -> Abc(ABC/Abc/abc) -> 123 -> Symbols

“*” Shift: Press to change capitalization T9 text : T9Word -> T9WORD -> T9word

Abc text : Abc -> ABC -> abc

“0” Next: In T9 mode, press to display other matching words.

“#” Space: Press to complete a word and insert a space.

“BACK” Clear: Press to delete a single space or character. Hold to delete the whole

message.

“1” Punctuation: In T9 mode, press to insert punctuation in a word and complete a

sentence.

Contacts in Your Phone’s Memory

The Basics of Storing Contacts Entries

1. From standby mode enter the phone number you want to save (up to 48 digits).

2. Press Left Soft Key Save.

3. Select either Save New or Update Existing.

4. Use to highlight a Label and press OK . Mobile 1/ Home/ Work/ Mobile 2/ Fax

5. Enter a name for the phone number (up to 22 characters) and press OK . A confirmation

message is displayed briefly.

Phone Numbers With

Pauses

When you call automated systems, such as voice mail or credit billing numbers, you

often have to enter a series of numbers to navigate through the system. Instead of

entering these numbers by hand, you can store the numbers in your Contacts

separated by special pause characters (W, P). There are two different types of

pauses you can use when storing a number: Wait (W) The phone stops dialing until

you press Left Soft Key Release to advance to the next number. Pause (P) The phone

waits 2 seconds before sending the next string of digits.

Note

Use Update Existing to add another phone number to a contact already stored in memory.

Contacts in Your Phone’s Memory

Storing a Number with Pauses

1. Press OK Menu.

2. Press 1 Contacts.

3. Press 1 New Contact.

4. Enter a name (up to 22 characters) and enter a number.

5. Press Right Soft Key Options.

6. Press 3 Wait or 4 Pause.

7. Enter additional number(s) then press OK .

Adding a Pause to an Existing Number

1. Press Right Soft Key Contacts to display your Contacts alphabetically.

2. Use to highlight the Contact entry to edit, then press OK.

3. Press Left Soft Key Edit.

4. Use to highlight the number.

5. Press Right Soft Key Options.

6. Press 3 Wait or 4 Pause.

7. Enter additional number(s), then press OK.

Searching Your Phone’s Memory

The AX310 phone is able to perform a dynamic search of the contents in your phone’s

memory. A dynamic search compares entered letters or numbers against the entries in your

Contacts. A matching list is displayed in descending order. You can then select a number

from the list to call or edit.

Scrolling Through Your Contacts

1. Press Contacts to display your Contacts alphabetically.

2. Use to scroll through the list.

Searching by Letter

1. Press Contacts to display your Contacts alphabetically.

2. Press (or press repeatedly) the key on the keypad that corresponds with the search letter.

Accessing Options

1. Press Right Soft Key Contacts.

2. Press Right Soft Key Options.

3. Select an option (use then press OK ,or press the corresponding number on the

keypad):

“1” Send Message: Send a text message or picture message to the selected contact.

“2” Delete: Delete the selected entry in your Contacts.

“3” Edit: Edit the selected contact information.

“4” Delete Multiple: Choose from Selective/ All to delete multiple entries at one time.

“5” Send via Bluetooth: Send a contact(vCard) via Bluetooth. In case Bluetooth power is not

on, a notice pops up to turn Bluetoothon.

“6” Set Speed Dial/ Remove

Speed Dial: Set a speed dial or remove the speed dial.

Making a Call From Your Phone’s Memory

Once you have stored phone numbers in your Contacts, you can place calls to those numbers

quickly and easily.

_ By pressing Send Key TALK after searching for a phone number in Contacts or Recent Calls

and highlighting it.

_ By using Speed Dialing. From Contacts

1. Press Right Soft KeyContacts to display your Contacts.

2. Use to highlight the Contact entry, then press OK.

3. Use to highlight the phone number.

4. Press TALK to place the call.

From Call History

1. Press Left Soft Key Menu.

2. Press “3” Call History.

3. Use to highlight the type of recent call, then press OK.

Missed Calls/Received Calls/Dialed Calls/All Calls

4. Use to highlight the phone number.

5. Press TALK to place the call.

Speed Dialing For a single-digit Speed Dial, press and hold the digit or press the digit, then

press TALK. For a double-digit Speed Dial, press the first digit and hold the second digit or

press the first and second digits, then press TALK.

Using Phone Menus

Contacts

The Contacts Menu allows you to store names, phone numbers and other information in your

phone’s memory. When you access your Contacts, the number in parentheses represents the

number of entries you have stored (up to 1000).

1. New Contact

Allows you to add a new contact to your Contact List.

1. Press OK ,1 ,1.

2. Enter the name, then press .

3. Highlight the field you wish to store the contact information in.

4. Enter the phone number or e-mail address.

5. Continue adding the desired contact information to the entry.

6. When you are finished entering the desired contact information, press OK Save to save the

entry into your Contact List.

2. Contact List

Allows you to view your Contact List.

1. Press OK ,1 ,2 .

2. Choose from the following options:

Note

Using this submenu, the number is saved as a new Contact. To save the number into an existing

Contact, edit the Contact entry.

_ Press to scroll through your Contacts alphabetically.

_ Press Right Soft Key Options to select one of the following:

Send Message/ Delete/Edit/ Delete Multiple/Send via Bluetooth/ Set Speed Dial

_ Press OK View to view the contact's information.

_ Press Left Soft Key

New to store new contact information.

3. Groups

Allows you to view your grouped Contacts, add a new group, change the name of a group, or

delete a whole group.

1. Press OK ,1 ,3.

2. Choose from the following options:

_ Use to highlight a group, then press OK View to view the contacts in the selected group.

_ Press Left Soft Key

New to add a new member to the group.

_ Use to highlight a group, then press Right Soft Key Options to choose from the following

options: Delete/ Send Message/Rename Group/ Set Ringtone/Delete All

4. Speed Dials

Allows you to view your Speed Dials list, designate new Speed Dials, or remove Speed Dial

designations entered in your Contacts.

1. Press OK, 1,4.

2. Use to highlight the desired Speed Dial location (or enter the Speed Dial digit), and

press OK Assign.

3. Use to highlight the Contact.

4. Use to highlight the number, then press OK . A confirmation message is displayed.

5. My Name Card

Allows you to view all of your personal Contact information including name and phone numbers.

1. Press OK, 1, 5.

2. Use to highlight the feature you wish to edit, and press Left Soft Key Edit.

3. Edit the information as desired and press OK .

Note

You cannot edit phone number, but you can add an additional phone number.

Messaging

The phone can store up to 435 messages. The AX310 supports up to 1000 characters. The

information stored in the message is determined by phone model and service capability.

Other limits such as available characters per message may exist, please check with your

service provider for system features and capabilities.

1. New Text Message

Allows you to send text messages, pages, and e-mail transmissions. Each message will

Andere Handbücher für AX310

Inhaltsverzeichnis

Beliebte Handy Handbücher anderer Marken

Zte

Zte BLADE A520 Bedienungsanleitung

Nokia

Nokia Lumia 620 Bedienungsanleitung

Blackbe;rry

Blackbe;rry KEYone Bedienungsanleitung

Bea-fon

Bea-fon X5 Premium Bedienungsanleitung

Blackbe;rry

Blackbe;rry 8707 Series Bedienungsanleitung

Blackbe;rry

Blackbe;rry Storm Betriebsanleitung

LifeWatch

LifeWatch V Bedienungsanleitung

Bea-fon

Bea-fon SILVER LINE SL860 Bedienungsanleitung

IKI Mobile

IKI Mobile KF4.5i Bedienungsanleitung

Hitech

Hitech HT-850 Bedienungsanleitung

Yezz

Yezz Fashion F10 Bedienungsanleitung

Point Mobile

Point Mobile PM60 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Q10 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Bold 9900 Bedienungsanleitung

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Bedienungsanleitung

ISAFE MOBILE

ISAFE MOBILE IS655.2 Bedienungsanleitung

Blackbe;rry

Blackbe;rry CURVE 8300 - SMARTPHONE Bedienungsanleitung

Blackbe;rry

Blackbe;rry 8707 - VERSION 4.1 Bedienungsanleitung