LG G5 Verizon Montageanleitung

Andere Handbücher für G5 Verizon

16

Inhaltsverzeichnis

Andere LG Handy Handbücher

Beliebte Handy Handbücher anderer Marken

Zte

Zte BLADE A520 Bedienungsanleitung

Nokia

Nokia Lumia 620 Bedienungsanleitung

Blackbe;rry

Blackbe;rry KEYone Bedienungsanleitung

Bea-fon

Bea-fon X5 Premium Bedienungsanleitung

Blackbe;rry

Blackbe;rry 8707 Series Bedienungsanleitung

Blackbe;rry

Blackbe;rry Storm Betriebsanleitung

LifeWatch

LifeWatch V Bedienungsanleitung

Bea-fon

Bea-fon SILVER LINE SL860 Bedienungsanleitung

IKI Mobile

IKI Mobile KF4.5i Bedienungsanleitung

Hitech

Hitech HT-850 Bedienungsanleitung

Yezz

Yezz Fashion F10 Bedienungsanleitung

Point Mobile

Point Mobile PM60 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Q10 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Bold 9900 Bedienungsanleitung

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Bedienungsanleitung

ISAFE MOBILE

ISAFE MOBILE IS655.2 Bedienungsanleitung

Blackbe;rry

Blackbe;rry CURVE 8300 - SMARTPHONE Bedienungsanleitung

Blackbe;rry

Blackbe;rry 8707 - VERSION 4.1 Bedienungsanleitung

LG G5

REPAIR GUIDE

Version 1

2016 Edition

RiAna Soto

Repair Training Specialist

[email protected]

LG G5 REPAIR GUIDE

LCD AND DIGITIZER REPLACEMENT

FOR EVERY REPAIR

MAKE SURE TO COMPLETE, INITIAL,

AND HAVE CUSTOMER SIGN THE CELLAIRIS

REPAIR LIABILITY WAIVER FORM

PRE-REPAIR DEVICE CHECK-IN

•Philips screwdriver

•Spudger

•Tweezers

•Isesamo

•Pentalobe screwdriver

•Magnetic Mat

•LG G5 Digitizer/LCD

TOOLS NEEDED

•Always operate the heat gun on the lowest setting.

•Keep face, hands, hair, and clothing away from the air stream.

•The air nozzle also becomes extremely hot. Never grab the heat gun by the nozzle.

•Never operate the heat gun by laying it on its side on a table. It should be firmly grasped in one hand

at all times during usage.

•Never operate near flammable or explosive liquids and vapors. Cleaning supplies and the 3M #94

Primer are of concern. Make sure fumes are absent from the work area before operating the heat gun

•The heat gun nozzle should never get closer than 2“ to the object being heated.

•Keep heat gun moving. Never stay in one spot.

HEAT-GUN PRECAUTIONS

•Magnetic Pad: During the repair, you will be utilizing a magnetic pad to organize the plethora of

differing screws that you will be pulling out of the iPhone 6S. Below is a list of several internal

components of the iPhone 6S that should never be placed on the pad, or you risk damaging the

hardware or erasing client data:

•LCD/Digitizer Assembly

•Cameras

•Motherboard

•Battery

•Speaker

ADDITIONAL PRECAUTIONS

•Power on/off: To avoid any damage to the hardware during the repair, it is best to have the device

powered off until you can get to and disconnect the battery.

•Battery: Never unplug any flex cables unless the battery has been completely disconnected to avoid

frying your hardware. Do not plug the battery back until all cables have been reconnected.

•Release Screws: Apply pressure on the screw and twist counterclockwise to initially loosen it, then

lighten the pressure and continue twisting until the screw is gently released. Make sure you have

properly sized screwdrivers available for the repair.

•Pin Connectors: extremely fragile and must be plugged or unplugged with extreme caution.

•Battery connector: held down by light adhesive and solder. If not cautious it will come off the

motherboard. Very time consuming to be repaired. Do not break it in the first place.

•Motherboard: small surface mount components can be easily damaged if they are nicked by the

spudger. Always take your time and never touch the surface of the motherboard.

ADDITIONAL PRECAUTIONS

STEP 1

•Remove the battery by holding battery release button (located on the bottom left side of the

device) and pull the bottom of device from the phone. This will expose the battery.

Disassemble the device

Tools: Pentalobe screwdriver

STEP 2

•Next, remove the sim card by using

sim card remover. The sim card is

located on the right side of the

device.

•Remove the two (2) Philips screws

located on the bottom portion of

the phone exposed after removing

the battery.

Tools: Isesamo