LG LG-DB210 Handbuch

LG-DB210 Operator’s Guide

February 08, 2000

Manual Part

R&D Planning Department

FCC RF EXPOSURE INFORMATION

In August 1996 the Federal Communications Commission (FCC) of the United States

with its action in Report and Order FCC 96-326 adopted an updated safety standard for

human exposure to radio frequency (RF) electromagnetic energy emitted by FCC

regulated transmitters. Those guidelines are consistent with the safety standard

previously set by both U.S. and international standards bodies. The design of this

phone complies with the FCC guidelines and these international standards.

Use only the supplied or an approved antenna. Unauthorized antennas, modifications,

or attachments could impair call quality, damage the phone, or result in violation of FCC

regulations.

Do not use the phone with a damaged antenna. If a damaged antenna comes into

contact with the skin, a minor burn may result. Please contact your local dealer for

replacement antenna.

Body-worn Operation

This device was tested for typical body-worn operations with the back of the phone kept

0.6 inches (1.5 cm) from the body. To comply with FCC RF exposure requirements, a

minimum separation distance of 0.6 inches (1.5 cm) must be maintained between the

user’s body and the back of the phone, including the antenna, whether extended or

retracted. Third-party belt-clips, holsters and similar accessories should not contain

metallic components and must provide 0.6 inch (1.5 cm) separation distance between

the user’s body and the back of the phone. Body-worn accessories that do not meet

these requirements may not comply with FCC RF exposure limits and should be

avoided.

For more information about RF exposure, please visit the FCC website at www.fcc.gov

WARNING! Read this information before using your phone

Digital Mobile Handset Lab.

LGIC

Front of the Phone

1. END/PWR Switch: Lets you power the phone on or off.

2. Antenna: Retractable antenna provides optimum reception for 1900 MHz frequencies.

3. Power On Indicator: Illuminates red when the phone powers on or when you receive incoming

calls. Flashes red when you have messages of scheduled alarms.

4. Headset Jack: Provides connection for an optional headset.

5. Volume Control Keys: Adjust the Ring Volume in the Main Menu or the Voice Volume during a call.

The keys also scroll through months in the Calendar or pages in the Mini Browser.

6. Mouse Key: Allows quick and easy scrolling through the menus.

7. OK: Lets you place a call, receive a call, end a call or select menu options.

8. Clear Key: Lets you clear an entry or back-up in the menu.

9. Folder : Lets you answer or end calls.

Installing the Battery

To install the battery, insert the bottom of the battery into the opening on the back of the phone. Then,

push the battery down until the latch clicks.

Removing the Battery

To remove the battery, release the latch and remove the battery from the phone.

Battery Charge Level

Using the Desktop Charger

To charge the battery, plug the AC Adapter into a standard wall outlet and connect it to the phone via

the I/O Connector on the bottom of the phone. Alternatively, you can place the phone in the charging

cradle provided with your phone and connect the AC Adapter to the back of the cradle.

The battery Charge Status icon flashes during charging. When the battery is fully charged, the battery

icon stops flashing

Basic Functions

Turning the Phone On

To turn your phone on, press the [END/PWR] for 2 ~ 3 secs. Your phone performs a short self-test

before letting you know it is operational.

Digital Mobile Handset Lab.

LGIC

Turning the Phone Off

To turn your phone off, press the [END/PWR] for a few secs until “Powering Off”is displayed.

Then release [END/PWR].

Power Save Mode

When the phone is in an area without service for 15 minutes, it stops searching for service and enters

into the power Save Mode. When your phone activates this feature, Power Save is displayed on your

screen. The phone automatically checks for service periodically or you can check manually by pressing

any key.

Signal Strength

The quality of each call you make or receive depends on the signal strength on your area. The number

of bars in the Signal Strength icon informs you of the current strength. The more bars, the stronger the

signal.

If you are outside of a service area, the “No service”icon will be displayed. No calls can be made or

received, including emergency calls.

Extend the antenna when the signal strength is weak. If you are in a building, the reception may better

near a window.

Introduction

Highlights

Congratulations on the purchase of your LG-DB210. This phone is lightweight, easy-to-use, reliable and

offers many significant features:

lRoaming capability provides access to other PCS CDMA networks where LG PCS has

implemented roaming agreements.

lData/Fax feature offers wireless modem capabilities for your personal computer in digital

mode.

lMini Browser provides Internet access in digital mode.

lBuilt-in Scheduler and Call Alarms remind you of events and important calls.

lTwo-hundred Phone Book entries store ??? phone numbers (up to 4 phone numbers per

entry)

lGraphical icons and text prompts inform you of messages, events and the status of your

phone.

Digital Mobile Handset Lab.

LGIC

lA Mouse Key provides easy navigation through menu options.

lAssign one of twenty ringer tones to any Phone Book entry.

Important Information

This Operator’sGuide contains important information on the use and operation of this phone. Please

read all of the information carefully for optimal performance and to prevent damaging or misusing the

phone.

Any changes or modifications not expressly approved in this Operator’s Guide could void your warranty

for this equipment and void your authorization to operate this equipment.

Getting Started

Making a Call

When the phone is turned on, check the Signal Strength icon to see of you are in a LG PCS Service

Area or authorized PCS CDMA networks provider’s service area.

1. Open the Flip.

2. Dial phone number, and then press .

¢Ñ

Tip! You also can make a call from the Call Log and through Phone Book entry number

3. When you are finished with your call, Press [END] or you can also end the call by closing the Flip.

Correcting Dialing Mistakes

Press to erase one digit at a time. To delete entire digits, hold a key for at least

1 second.

Call Waiting

While you are on a call, you may hear a beep indication another incoming call and the person’s Caller

ID information is displayed.

Adjusting the Volume

Ringer Volume

To adjusting the Ring Volume, scroll to volume control keys from the MAIN menu screen and press

Volume Control Keys up or down. The current Volume setting is displayed.

Voice Volume

To adjust the incoming Voice Volume, press the Volume Control keys up or down during a call. The

CLR CLR

Digital Mobile Handset Lab.

LGIC

current Volume setting is displayed.

Note: You also can control key beep volume from the menu. (See “Adjusting the volume”)

Dialing State

Dialing Options

When you enter numbers in the Main Menu, dialing options are displayed.

To choose an option, select the option you want and press . .

lCall –Dials the phone number.

lRoam Confirm –Reminds you that you are making a call on an. (See “Disabling Roam Confirm”)

lRoam Call –Dials the phone number using the current PCS CDMA networks.

lSave –Saves the phone number in your Phone Book. (See “Saving a Phone Number”)

lFind –Displays phone numbers in your Phone Book that contain the entered numbers. (See

“Finding a Phone Number”)

lHard Pause –Inserts a Hard Pause. (See “Dialing and Saving Phone Numbers With Pauses”)

l2- Second pause –Inserts a two-second pause. (See “Dialing and Saving Phone Numbers With

Pauses”)

lExit –Returns to the Main Menu.

Finding a Phone Number

You can search for Phone Book entries that contain a specific string of numbers.

To find a phone number:

1. Enter one or more digits. The more numbers you enter, you can search more narrowly.

2. Move cursor to Findand press .

3. To Display an entry, move cursor to it and press . To speed dial a number, highlight it and

press on hold.

Phone Book Entry and Speed Dialing

To retrieve a Phone Book entry, enter its entry number. You can see name and associated numbers.

The first highlighted number is default speed-dialing number. To dial the entry’s speed-dealing number,

press and hold . To dial an alternate number, scroll by cursor key and press and hold .

One touch / Two touch / Three touch dialing

To speed dial a Phone Book entry from the Main Menu, press the entry’s number on hold. If

the entry number is two digits, dial the first digit, then press second digit on hold. If the entry

OK OK

Digital Mobile Handset Lab.

LGIC

number is three digits, dial the first and second digit, then press the third digit on hold. (This feature

will not work when the Roam Confirm option is enabled.)

4-Digit Dialing

4-Digit Dialing option allows you to make a call by entering the last four digits of a phone number in your

Phone Book.

If you select 4-Digit Dial, your phone dials the phone number in your Phone Book that ends with the four

digits you entered.

To use 4-Digit Dialing:

1. Dial the last four digits of an entry’s phone number.

2. Move cursor to 4-Digit Dial and press

Note: 4-Digit Dialing dials the first number in your Phone Book matching the four digits.

In Call State

In Call Options

Even during a conversation on your phone, you can use several menu options in addition to the Main

Menu.

To select an option, Move cursor to it and press .

lEnd Call - Ends the call

lSend Tones - Sends the next set of numbers after a Hard Pause.

lMute or Unmute –Select Mute to mute your phone’s microphone. Select Unmute to resume.

lDial 3-Way Call –Lets you dial another phone number.

Flash –Answers an incoming Call Waiting call or connects the third party for Three-Way Calling.

Mute / Unmute

Mute or Unmute –Select Mute to mute your phone’s microphone. Select Unmute to resume

Three-Way Calling

Three-Way Calling lets you talk to two people at the same time.

1. Dial your first number and press

2. When you have connected, move cursor to 3-Way Call and press .

3. Dial the second number, move cursor to Call and press .

Digital Mobile Handset Lab.

LGIC

4. When the second call is answered, move cursor to Flash and press for your Three-Way

Calling.

Note: You can also initiate a Three-Way Call during a Call by dialing a phone number from your Phone

Book, Call History or Page/Text messages.

Redialing Last Outgoing Number

With Call History selected, hold key for 2 seconds.

Emergency Dialing

Despite your phone is locked, it is possible to dial 911, one of the other three special emergency

numbers that are in your emergency number list or Customer Care. As long as you’re within a service

area (check your signal strength indicator), these numbers can be dialed.

Note: To make your phone lock, see “Locking Your Phone”.

Calling 911

1. Dial

2. Press .

Note: Even your account is restricted, you can still dial 911

(as long as you’re within a service area) but no other emergency numbers.

Dialing special numbers.

In an emergency, you can call your stored special numbers even when your phone is locked unless

your account is restricted.

1. Dial one of the three special numbers stored in your emergency list. Your special numbers

must be dialed exactly as stored –with or without the area code.

2. Press .

Call History

Retrieving Recent Call History

Your LG PCS LG-DB210 stores your last ten incoming, ten outgoing and ten missed calls in the Call

History memory.

1 19

Digital Mobile Handset Lab.

LGIC

Call History Menu

Outgoing Calls

Incoming Calls

Missed Calls

Erase

Options for Call History

During using Call History Menu, following Call History menu Options are displayed.

To select an option, move cursor to it and press .

lCall –Dials the phone number.

lAlternate #s –If the phone number is in your Phone Book and the entry has alternate numbers,

they are displayed. To dial an alternate number, highlight it and press and hold .

lSave Phone # - If the phone number is not in your Phone Book, an entry is created.

lTime/Date –Displays the time, date and duration of the call.

lPrepend –Prepends the phone number. (See “Prepend Dialing”on the following page.)

lErase –Deletes the Call Log entry.

lNext –Displays the next Call log entry.

lPrevious –Displays the previous Call log entry.

¢Ñ

Tip! You can also view the next or previous entry by pressing the Mouse Key left (previous) or

right(next).

Viewing Call logs

To view the last ten incoming, ten outgoing or ten missed calls.

1. Move cursor to Call logson the Main Menu and press .

2. Select one of the following: Outgoing Calls, Incoming Callsor Missed Callsand press .

3. To display a Call Log entry, choose the entry and press . The phone number, Phone Book

entry name (if the number is in your Phone Book) and Call History menu options are shown.

Digital Mobile Handset Lab.

LGIC

Dialing Phone Numbers From the Call Log.

1. Move cursor to Call logson the Main Menu and press .

2. Select either Outgoing Calls, Incoming Callsor Missed Callsand press .

3. To dial from the call log, select the phone number you want to call and press on hold.

4. On the Call history menu, highlight [Call] and press [OK]

Note: You cannot dial phone numbers identified as No ID, Restricted, Data or Fax calls.

Saving Phone Numbers From the Call log.

1. Move cursor to Call logson the Main Menu and press .

2. Select either Outgoing Calls, Incoming Callsor Missed Callsand press .

3. Select the phone number you want to save and press .

Note: You cannot save phone numbers identified as No ID, Restricted calls.

4. On the Call history menu, move cursor to [Save] and press [OK].

5. Select one of the following: Home, Work, Mobile, or Pagerand press .

6. Enter a name or move cursor to Save w/o Nameand press .

7. Press to save the entry in the next available memory location. (You can also enter an entry

number or highlight an empty location and press . )

Viewing and Resetting Air Time

Air Time displays MiniBrowser access and Sprint PCS, PCS CDMA Networks air time (rounded to the

nearest minute), as well as the number of calls made to or from your phone.

To view Air Time:

1. Move cursor to Call logsand press .

2. Move cursor to Air Time and press .

3. To reset the Air Time, move cursor to Resetand press .

Note: Air Time is not intended for billing purposes.

Inhaltsverzeichnis

Beliebte Handy Handbücher anderer Marken

Zte

Zte BLADE A520 Bedienungsanleitung

Nokia

Nokia Lumia 620 Bedienungsanleitung

Blackbe;rry

Blackbe;rry KEYone Bedienungsanleitung

Bea-fon

Bea-fon X5 Premium Bedienungsanleitung

Blackbe;rry

Blackbe;rry 8707 Series Bedienungsanleitung

Blackbe;rry

Blackbe;rry Storm Betriebsanleitung

LifeWatch

LifeWatch V Bedienungsanleitung

Bea-fon

Bea-fon SILVER LINE SL860 Bedienungsanleitung

IKI Mobile

IKI Mobile KF4.5i Bedienungsanleitung

Hitech

Hitech HT-850 Bedienungsanleitung

Yezz

Yezz Fashion F10 Bedienungsanleitung

Point Mobile

Point Mobile PM60 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Q10 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Bold 9900 Bedienungsanleitung

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Bedienungsanleitung

ISAFE MOBILE

ISAFE MOBILE IS655.2 Bedienungsanleitung

Blackbe;rry

Blackbe;rry CURVE 8300 - SMARTPHONE Bedienungsanleitung

Blackbe;rry

Blackbe;rry 8707 - VERSION 4.1 Bedienungsanleitung