LG LG-MD120 Bedienungsanleitung

6. Operating Manual

LG-MD120

User Guide

CDMA PHONE

Contents

Introduction

Highlights

Important Information

Check Accessories

Before You Start

FCC RF EXPOSURE INFORMATION

Chapter 1. Getting Started

Cautions

Phone Overview

On screen Icons

Chapter 2. Basic Functions

Turning the Phone On and Off

aking a Call

Correcting Dialing Mistakes

Receiving Calls

Emergency Dialing

Speed Dialing

Phone Book Features

Chapter 3. Menu Features

General Guidelines to MENU Access and Settings

Names

Messages

Call History

Profiles

Display

Settings

Organizer

RWorld

Chapter 4. Book Features

Names

Chapter 5. Message Features

Write Message

Inbox

1234 Services

Outbox

Voice Mail

Archive

Draft

Templates

Msg Groups

Erase Msgs

Msg Settings

Chapter 6. Functions used during a call

Scratch pad

Mute

VoicePrivacy

Send my number

Short DTMF

Chapter 7. Accessories

Chapter 1. Getting Started

Cautions

zUsing the phone in proximity to receiving equipment (i.e., TV or radio) may cause

interference.

zKeep your phone in a safe place when not in use.

zOnly use the batteries, antennas, and chargers provided by LG. Using the wrong

accessories could void your warranty.

zOnly authorized personnel should service the phone and its accessories. Faulty installation

or service may result in accidents and consequently invalidate the warranty.

zDo not hold the antenna while the phone is in use.

zDo not use the phone in designated “no cellular phone use” areas.

zDo not expose the phone to high temperature or humidity.

zAvoid getting your phone wet. If the phone gets wet, turn the power off immediately and

remove the battery pack. If the phone is mal-functional, return it to the dealer for service.

zAvoid shock or impact on the phone.

Phone Overview

Function Key Descriptions

Lamp The light goes on when you use the power key to turn on the phone and when there are

incoming calls and messages.

LCD screen Displays messages & indicator icons.

END/PWR Used to turn power on/off. This key disconnects a call. Using this key, you can also exit out of

a menu back to the phone’s standby display without changing the setting.

SEND Allows user to place or answer calls.

Mouse Key

This mouse key allows quick access to text and voice mail notification messages. Profiles, R-

World, and RingTone menu.

And these keys are used to scroll through the memory locations and menu items.

Alphanumeric

Keypad These keys enable you to enter numbers and characters and choose menu items.

Soft Keys

The current operation of a soft key is defined by the word at the bottom of the display.

Soft Keys 2 :

If you press this key once in a menu, you can go back one level and if you press and hold the

key in a menu, you can go back to the standby display.

OK Key This key enables you to choose one item in the menu list.

If you press this key in idle, mobile will show you the ‘My menu’ selection window.

Star/Pound Key - In the standby status, set the manner mode by pressing the [ * ]button. (for 2 seconds)

- In the standby status, set the lock function by pressing the [ # ]button. (for 2 seconds)

Clear Key This key enables you to move previous menu or delete on a character in editor

On screen Icons

The phone screen displays several onscreen icons and onscreen icons appears when the phone is

power on.

Icons Descriptions

Displays the strength of the signal received by the phone and current signal

strength is indicated as the number of bars displayed on the screen.

No service

The phone is not receiving a system signal.

In use

A call is in progress.

No icon indicates the phone is in standby mode.

Indicates that a text message or voice mail has been received

Charge level

Indicates battery charge level.

Chapter 2. Basic Functions

Turning the Phone On and Off

Turning the Phone On

1. Install a charged battery pack or connect the phone to an external power source such as the

cigarette lighter adapter or car kit.

2. Press [END/PWR] for a few seconds until the red light on the top of the phone flashes.

zFully extend the antenna for the best performance.

<Note> Like any other radio device, avoid any unnecessary contact with the antenna while your

phone is on.

Turning the Phone Off

1. Press and hold[END/PWR] until display screen will be turned off, and then release the key.

2. Protect the antenna by pushing it back into the phone, if extended.

Making a Call

When you make a call, follow these simple steps:

1. Make sure the phone is turned on.

zIf not, press [END/PWR].

2. Enter the phone number with area code, if needed.

3. Press [SEND].

zIf the phone is locked, enter the lock code.

z“Call Failed” indicates that the call did not go through.

4. Press [END/PWR] to disconnect the call.

Correcting Dialing Mistakes

If you make mistakes in dialing a number, press [CLR] key once to erase the last entered digit or

hold down [CLR] for at least two second to delete all digits, or simply press soft key 2 [BACK] to

exit dialing state.

Receiving Calls

1. When the phone rings, open cellcase or If cellcase is open, press any key (except [END/PWR],

[5][6], [3((]) to answer.

zIf you press the key [END/PWR], Side Keys ([(][(]) once when you receive a call, you can

hold the present call and ring sound or vibration stops. If you press the [END/PWR] key,

Side Keys ([(][(]) twice, the present call is terminated.

2. Press [END/PWR] to disconnect the call.

In call waiting mode, the present call is on hold as you answer another incoming call.

This service is provided by your service provider.

When the call waiting function is activated, your phone will beep to let you know if you have an

incoming call. Your phone may also display the incoming caller’s identification.

Dialing a call from Phone Book

You can place a call from any memory location either by speed dialing or by pressing [SEND] while

looking up the memory location.

One-Touch Dialing : One-touch dialing is a convenient feature which enables you to dial

frequently used numbers in your speed-dial data by pressing a key .

zEntry 9 is designated to Emergency Call.

zEntry 1 is designated to Voice Mail.

zFor locations 1 to 8, you can use one-touch dialing (if enabled, see “One-Touch” on page

9.) by pressing and holding down the key corresponding to the memory location.

zPress digit, then press [SEND].

Two-Touch Dialing (Speed Dialing) : This dialing feature enables you to dial numbers in your

phone book through two keys (for locations 10 to 99).

1) Press the first digit.

2) Press and hold the key of the second digit.

1) Press the first and second digits, then press [SEND].

Dialing from a Memory List

1) From a memory list, press the scroll keys to go to the memory location you want.

2) Press [SEND].

Dialing from a Memory Location.

On viewing and checking the memory location to call, press [SEND].

Chapter 3. Menu Features

General Guidelines to MENU Access and Settings

1. Press Soft Key 1 [Menu]. The animation of menu category will appear on the display screen.

2. Press Soft key 1 or Soft Key 3 [Ok]. The menu items will appear on the display screen.

3. Press[v] to go through the list of menu features.

4. Press the corresponding number to the menu item that you want to select. Then the sub-menu

list will appear on the screen.

5. Press the appropriate key to select the sub-menu you want to access.

6. Select preferred settings, using the [v] keys. Press Soft Key 2 [Back] to go one step backward

while accessing menu or selecting settings.

7. Press Soft Key 1 or Soft Key 3 [Ok] to save the settings or Soft Key 2 [Back] to cancel without

saving.

Names ([Menu]+[5])

see “Book Feature” on page 10.

Messages ([Menu]+[6])

see “Message Feature” on page 12.

Call History ([Menu]+[1])

Allows you to view the 60 most recently dialed phone numbers. Once you exceed the 60-number

storage limit, the oldest call history record is overwritten. These calls are divided into 4 types of

calls

All ([Menu]+[1]+ [1])

Allows you to view list of all the incoming and outgoing calls and you may place a call by pressing

[Send].

Missed ([Menu]+[1]+ [2])

Allows you to view list of all missed incoming calls and you may place a call by pressing [Send].

Received ([Menu]+[1]+ [3])

Allows you to view list of all incoming calls and you may place a call by pressing [Send].

Dialled ([Menu]+[1]+ [4])

Allows you to view list of all outgoing calls you made and you may place a call by pressing the

[Send].

In call memo ([Menu]+[1]+ [5])

Allows you to view memo saved in use meno

Call Duration ([Menu]+[1]+ [6])

1. Last Dialled call - Displays the time of last call made

2. All Dialled calls - Displays the time of all calls made

3. All calls

4. Reset All Duration – Allows you to clean duration

Erase History ([Menu]+[1]+ [7])

Allows you to erase call infomations(missed, received, dialed, data calls)

Downloads ([Menu]+[2])

My Vivo ([Menu]+[3])

1. Main Keys([Menu]+[3]+[1])

Allows you to display the shortcut menu of Idle or not.

2. Menu Style([Menu]+[3]+[2])

Allows you to display the Topmenu in Grid Style or List Style.

3. Menu Reorder([Menu]+[3]+[3])

Allows you to set the shortcut menu of Idle in random order.

4. Sounds([Menu]+[3]+[4])

Allows you to set ringer, volume and alert types refer to

1.sound.Ringers( [Menu]+[3] +[4]+ [1] )

Here,you can set the ringer of Caller ID, No Caller ID，Power on and

Power off

2.Volume( [Menu]+[3] +[4]+ [2] )

Allows you to set the volume of Ringer, Earpiece and key beep.

3.Alerts( [Menu]+[3] +[4]+ [3] )

You can set Alert type of Service Change, Minute Beep, and Call Connect.

4.Power On/Off Tone ( [Menu]+[3] +[4]+ [4] )

Allows you to set the type of Power On/Off Tone(On or Off).

5. Display([Menu]+[3]+[5])

Allow you to make any setting of screens.

1. Clock ( [Menu]+[3]+[5]+[1] )

You can determine that clock display or not in standby and time, date type if clock

display. Wallpaper ( [Menu]+[5]+[4] )

You can set up the screen displayed on the LCD screen in the standby mode.

(Theme, Current Profiles display,Banner)

2. Screens( [Menu]+[3]+[5]+[2] )

You can chose the paper of Wall, Power on and Power off in this item.

3. Banner( [Menu]+[3]+[5]+[3] )

Allow you to set or remove banner in this item.

4. Backlight ( [Menu]+[3]+[5]+[4] )

Allows you to select how long or when the display screen and keypad are backlit.

The backlight is turned off 10 seconds/20 seconds/30 seconds/1min after the last

key is pushed.

5. Brightness ( [Menu]+[3]+[5]+[5] )

You can set the brightness of the screen to 100% /80% /60% /40%.

6. Contrast ( [Menu]+[3]+[5]+[6] )

Allows you to set up LCD display contrast with [34] key.

6. Language([Menu]+[3]+[6])

Allow you to set the language of the phone.

7. My Menu([Menu]+[3]+[7])

LCD will display top Menu list. You can add one of these to my menu and also remove

registered menu from my menu.

Add : My menu is possible up to 10 pieces.

Remove : Allow you to remove registered menu from my menu.

Tone&Images ([Menu]+[4])

1. Images ([Menu]+[4]+[1])

Display the default and downloaded images in the phone

2. Tones ([Menu]+[4]+[2])

Display the default and downloaded tones in the phone

3. Memory ([Menu]+[4]+[3])

Display the states of memory which is used to store the downloaded images and tones

of the phone.

Phonebook ([Menu]+[5])

see “Phonebook Feature” on page 12.

Messages ([Menu]+[6])

see “Messages” on page 12.

Entertainment ([Menu]+[7])

1. Game and Apps([Menu]+[7]+[1])

Allow you to download games and applications using BREW.

2. Voice Portal([Menu]+[7]+[2])

???

3. Voice Informa([Menu]+[7]+[3])

???

Voice Mail ([Menu]+[8])

1. Voice Mail([Menu]+[8]+[1])

???

More ([Menu]+[9])

1. Tools([Menu]+[9]+[1])

Allow you to use the tools in the phone.

2. Settings([Menu]+[9]+[2])

Allows you to set Menu, Sound, Display, Call, Phone and Security. Select menu with

[5] [6] or [v] key.

3. Help([Menu]+[9]+[3])

Display the helps which can be used to help you to use the phone easily.

Chapter 4. Phonebook Features

Phonebook ([Menu]+[5])

Voice Mail ([Menu]+[5]+[1])

In this menu, you can access the voice mail.

Vivo Agenda ([Menu]+[5]+[2])

In this menu, you can make a backup of the list of contacts to a server.

Add Name ([Menu]+[5]+[3])

1. Press Soft Key 1 [Menu]

2. Press [3]

3. Enter the phone number you want to add.

4. Select number’s destination (Mobile Home, Office and Other)

5. Enter name

6. Press Soft Key 1 [Save]

Contacts ([Menu]+[5]+[4])

1. Press Soft Key 1 [Menu]

2. Press [4]

3. Enter the name you want to find.

4. You can go another find menu using Soft Key 1 [Options]

5. In View Menu, LCD will display all information belong to selected contact. And you can

edit,send message or erase in this status.

6. In Find number, Enter the number you want to find.

7. In Find Group, You can select group with [v] key.

Groups ([Menu]+[5]+[5])

In this menu, you can view group members, set ring tone and msg tone, edit group’s title.

1. Press Soft Key 1 [Menu]

2. Press [5]

3. Select group you wand with [v] key.

4. Press Soft Key 1 [Options].

5. You can go sub menu(view members, set ring tone, set msg tone)

6. In View members menu, LCD will display all members belong to selected group. And you

can add,erase or view contact in this status.

7. In Set Ring Tone menu, you can select ring tone with [v] key.

8. In Set Msg Tone menu,You can select message tone with [v] key.

9. Press Soft Key 2 [Edit], you can enter different group name.

Speed Dial ([Menu]+[5]+[6])

1. Press Soft Key 1 [Menu]

2. Press [6]

LCD will display all speed dial address, and you can select a address with [v] key or by

inputing address numbers.

3. If a address you selected is empty, you can select one of 3 option(Assign,Next empty and

Remove all) with Soft Key 1 [Options].

4. In Assign menu, you can add name in speed dial

5. In Next empty menu, you can go next empty address

6. In Remove all menu, you can erase all address assigned in speed dial.

7. If a address you selected is assigned, you can select one of 3 option(Replace, Next empty,

and Remove all) with Soft Key 1 [Options].

8. In Replace menu, you can replace another name saved in phonebook data.

9. In Next empty menu, you can go next empty address

10. In Remove all menu, you can erase all address assigned in speed dial.

11. If a address you selected is assigned,you also can press Soft Key 2 [Remove] and erase

contact selected.

Chapter 5. Message Features

Text message, page and voice mailbox become available as soon as the power is on. You can

access the above types of messages using the message key ([4]). In addition, you can make a

call to the call back number by pressing the [Send] during a message check.

The phone can store up to 31 messages (Voice message : 1, Text messages 30) with 140

characters per message. However, you should check whether your carrier provides the above

features.

The information that is stored on the message is determined by phone mode and service capability.

You can check types of messages by pressing the message key ([4]).

Massage Service

This service supports reception of the text message, alerting, and the voice mailbox. It is possible

to access the above functions with the text message key .

It is possible to store up to total 31(new+old+voice) messages. It is recommended to check the

number of character receivable because the capacity depends on the system service provider.

- New SMS: Menu to send message.

- Inbox : Menu to check a new incoming, stored text message

- Outbox : Menu to check the message user have sent and was saved.

- Voice Mail : Menu to check the number of voice messages in the voice mailbox

- Templates : Predefined Messages by user.

- Archive : Saved message in Inbox

- Drafts : Saved message in Write message

- Message Groups : Msg Groups consists of 5 SMS/E-mail Group.

- Msg Settings : Menu to set the SMS priority or Delivery ack and so on.

- Erase Message : Menu to erase all the stored messages

- Move the cursor with the upside and downside keys [v], and press Soft Key1 [Select] for the

menu requested. Press Soft Key 2 [Back] to return to the initial image on the terminal.

1. New SMS ([4]+[1])

A. Press [Select]

B. Enter Message Menu and Press [Option]

•Send : send msg

•Templates : insert templates

•Save : save to Draft

•Add Sign: add signature

C. Select [Send]

D. Enter Phone Number

Inhaltsverzeichnis

Beliebte Handy Handbücher anderer Marken

Zte

Zte BLADE A520 Bedienungsanleitung

Nokia

Nokia Lumia 620 Bedienungsanleitung

Blackbe;rry

Blackbe;rry KEYone Bedienungsanleitung

Bea-fon

Bea-fon X5 Premium Bedienungsanleitung

Blackbe;rry

Blackbe;rry 8707 Series Bedienungsanleitung

Blackbe;rry

Blackbe;rry Storm Betriebsanleitung

LifeWatch

LifeWatch V Bedienungsanleitung

Bea-fon

Bea-fon SILVER LINE SL860 Bedienungsanleitung

IKI Mobile

IKI Mobile KF4.5i Bedienungsanleitung

Hitech

Hitech HT-850 Bedienungsanleitung

Yezz

Yezz Fashion F10 Bedienungsanleitung

Point Mobile

Point Mobile PM60 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Q10 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Bold 9900 Bedienungsanleitung

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Bedienungsanleitung

ISAFE MOBILE

ISAFE MOBILE IS655.2 Bedienungsanleitung

Blackbe;rry

Blackbe;rry CURVE 8300 - SMARTPHONE Bedienungsanleitung

Blackbe;rry

Blackbe;rry 8707 - VERSION 4.1 Bedienungsanleitung