LG 55EH5C Bedienungsanleitung

www.lg.com

Please read this manual carefully before operating the your set and retain

it for future reference.

webOS 3.0

INSTALLATION MANUAL

LG Digital

Signage

(MONITOR SIGNAGE)

CONTENTS

ACCESSING

INSTALLATION MENU ..................4

INSTALLATION MENU ..................5

- Signage Setup.....................................................................5

Power On Status

Wake On LAN

LAN Daisy Chain

Power Off Management

Rotation

Beacon

Baudrate (9600/115200)

Power On Delay (0 ~ 250)

Check Screen

Digital Audio Input

Speaker

USB Auto Playback

Power Indicator

Interface Selection

OPS Power Control

Sync Mode

Intelligent Auto

Studio Mode

White Balance

HDMI IT Contents

Application

Crestron

No Signal Image

Factory Reset

Semi-Transparent Brightness (0–100)

Hybrid Mode

Return Interval (0–10)

Proximity Sensitivity

Status Message

SIMPLINK Setup

Local Dimming

Holiday Schedule

Easy Brightness Control

Web Browser

Guide to Using Content Rotation

- USB Cloning......................................................................20

Send to USB

Receive from USB

Logo Image Download

- Password Change..........................................................20

ENGLISH

- Fail Over..............................................................................21

Off

Auto

Manual

- ISM Method......................................................................22

Mode

Repeat

Wait

Duration

Action Cycle

Bar Image

Bar Color

Transparency

Direction

Bar Image Download

User Image Download

User Video Download

* How to reset or delete downloaded bar

images/user images/user videos

- Server...................................................................................25

Set Automatically

Server IP

Server Status

Port Number

Secured Connection

Link Server IP

Link Server Port

Link Server Status

- Lock Mode.........................................................................26

USB

OSD

Reset to Initial Settings

IR Operation

Local Key Operation

ENGLISH

ACCESSING INSTALLATION MENU

1 Press and hold the SETTINGS button for 5 seconds.

2 When Input ID (The top right corner ) is displayed, enter your password.

(The default value is 0, 0, 0, 0 • )

3 When the Installation Menu is displayed, select the desired option.

- Signage Setup

- USB Cloning

- Password Change

- Fail Over

- ISM Method

- Server

- Lock Mode

NOTE

• Images in the manual may look different from the actual product.

ENGLISH

INSTALLATION MENU

NOTE

• Some features described in the Installation manual may not be supported in certain models.

Signage Setup

Use this menu to configure the digital signage after installation.

Power On Status

• You can select the operating status of the monitor when the main power is switched on.

• You can select from among PWR, STD, and LST.

• PWR sets the status of the monitor to on whenever the main power is switched on.

• STD sets the status of the monitor to standby when the main power is switched on.

• LST sets the status of the monitor back to its previous status.

Wake On LAN

• You can set whether to use the Wake On LAN feature.

• You can set the feature to On or Off for each wired/wireless network.

• Wired: When set to On, the Wake On LAN feature is enabled, letting you turn the product on remotely through the

wired network.

• Wireless: When set to On, the Wake On LAN feature is enabled, letting you turn the product on remotely through the

wireless network.

LAN Daisy Chain

• LAN Daisy Chain forms a daisy chain of LAN ports so that even if you connect only one monitor set to a network, the

other sets in the daisy are connected to the network.

• The first set in the daisy chain must be connected to a network through a port that is not being used for the daisy

chain.

ENGLISH

Power Off Management

• No Signal Power Off (15 Min)

- You can choose whether to use the 15 min force off feature.

- You can set this option to On or Off.

- If you set this option to On, the product turns off when it has remained in no signal status for 15 minutes.

- If you set this option to Off, the 15 min force off feature is disabled.

- Set this option to Off when you use the product for a long period of time.

• Auto Power Off

- You can choose whether to use the 4 hours off feature.

- You can set this option to 4 Hours or Off.

- If you set this option to 4 Hours, the product turns off when you have not pressed any buttons on the remote

control for 4 hours.

- If you set this option to Off, the 4 hours off feature becomes disabled.

- Set this option to Off when you use the product for a long period of time.

• DPM

- You can configure the DPM (Display Power Management) function.

- Off: you can set this option to Off, 5 sec./10 sec./15 sec./1 min./3 min./5 min./10 min. (The settings may vary

depending on the model.)

- If this option is not set to Off, the monitor set enters the DPM mode when there is no input signal.

- If you set this option to Off, the DPM function is disabled.

- In the cases below, 5 sec. and 10 sec. options will be disabled for DPM. If DPM is already set to 5 sec. or 10 sec., it

will be changed to 15 sec.

1. When USB Auto Playback is set to Photo or Movie (OLED models support the Movie option only.)

2. When Fail Over is set to Auto or Manual

- If you set this option to 10 sec. or less, the monitor set enters the DPM mode before automatic play of SuperSign

contents.

• DPM Wake up Control

- Turns on the monitor set according to the digital signal processing of the connected DVI-D/HDMI port.

- Setting this option to Clock only checks for the signals from the digital clock. If there is a clock signal, the monitor

set is turned on.

- Setting this option to Clock+DATA turns on the monitor set only when there are both digital clock signal and data

signal inputs.

ENGLISH

• PM Mode

- Power Off: Normal DC off status.

- Sustain Aspect Ratio: Normal DC off status except that Switching IC stays on. On certain models, this applies only

to a specific input mode (DisplayPort) and has the same effect as Screen Off Always in other input modes.

- Screen Off: Automatically changes to Screen Off status when entering the DPM mode, Auto Off (15 mins, 4 hours),

or Abnormal Shut Down.

- Screen Off Always: Automatically changes to Screen Off status when entering the DPM mode, Auto Off (15 mins,

4 hours), Off Timer, Abnormal Shut Down, or when there is input from the remote control's Power button or the

monitor's Off button.

- To change the screen from Off to On status, there must be input from the remote control's Power or Input button,

or the monitor's On button.

- Screen Off & Backlight (Outdoor Mode): This feature allows the enclosure to function normally in temperatures

below zero.

NOTE

• Set to Screen Off & Backlight (Outdoor Mode) when installing outdoors.

• When operating in low temperatures, the enclosure may not work for up to one hour to raise the internal

temperature of the enclosure.

• For compatibility of some media input devices, set the Sustain Aspect Ratio.

ENGLISH

Rotation

• OSD Portrait Mode

- This feature allows you to rotate the OSD clockwise.

- You can set this feature to Off/90/180/270. (Some models only support certain settings.)

- If you set this feature to Off, the feature is disabled.

- If you set this feature to 90, the OSD rotates 90 degrees clockwise. In this case, the mouse cannot be used.

- If you set this feature to 180, the OSD rotates 180 degrees clockwise. In this case, the mouse cannot be used.

- If you set this feature to 270, the OSD rotates 270 degrees clockwise. In this case, the mouse cannot be used.

- Depending on the model, you can set this feature to Off/On. If you set this feature to On, the OSD rotates 90

degrees clockwise.

- Web Browser is deactivated while using OSD Portrait.

• Aspect Ratio (Rotation)

- Selects an aspect ratio option that will be applied to Content Rotation. (Original/Full)

• Content Rotation

- Rotates the image clockwise by 90 degrees, 180 degrees, or 270 degrees.

- It is recommended that you use content designed to be used in Portrait mode.

- As for ARC, setting Content Rotation to On (90 or 270) adjusts the size of a video to the full screen size.

- With WiDi, it is recommended that you set Aspect Ratio to Original if you intend to use Content Rotation. If you set

Aspect Ratio to Full, the displayed position of the mouse pointer may not be accurate.

- Image quality degradation is not a product issue when setting Content Rotation using external input.

- Setting Content Rotation to On disables the Multi-screen PIP mode.

- If Content Rotation is set to On (90 or 270 degrees), some widgets and SWF files may not appear properly.

ENGLISH

Beacon

• Enables BLE Beacon, one of Bluetooth 4.0's features.

• Beacon Mode (on/off toggle): Enables the Beacon feature.

• Supports LG Beacon/iBeacon/Eddystone Type Beacon features.

• LG Beacon/iBeacon

- Beacon UUID (hex): Sets the UUID.

1. Field1: 4byte hex value (8 digits)

2. Field2: 2byte hex value (4 digits)

3. Field3: 2byte hex value (4 digits)

4. Field4: 2byte hex value (4 digits)

5. Field5: 6byte hex value (12 digits)

- Major (0–65535): Sets the Major value.

- Minor (0–65535): Sets the Minor value.

• Eddystone

- Frame: Sets UUID or URL.

1. Beacon UUID (hex): Sets the UUID.

(1) Field1: 10byte hex value (20 digits)

(2) Field2: 6byte hex value (12 digits)

2. Setting the URL

- URL Prefix: Sets the prefix of the URL.

- URL Suffix: Sets the suffix of the URL.

- URL: Enter the part of the URL that excludes the prefix and suffix.

- URL string length is limited to 17 characters.

• OK: Confirm button that applies the settings that you have entered.

• Some models do not support background scanning services in iOS.

• A reboot is recommended for the settings to be applied properly.

• The UUID value is hexadecimal and the exact number of digits must be entered.

Baudrate (9600/115200)

• You can change the RS-232C communication speed for controlling your monitor.

• You can choose 9600 or 115200.

• If you set this option to 9600, the RS-232C communication speed is set at 9600 bps.

• If you set this option to 115200, the RS-232C communication speed is set at 115200 bps.

Power On Delay (0 ~ 250)

• This feature delays power on in order to prevent overload when multiple monitor sets are turned on simultaneously.

• You can set the delay interval in the range of 0 to 250 seconds.

ENGLISH

Check Screen

• The Check Screen feature judges whether there are abnormalities at the edges of the screen. R, G, and B OSDs are

formed on the screen at one second intervals and an Pixel Sensor tests the areas.

• If set to On, the Check Screen feature is enabled.

• If set to Off, the Check Screen feature is disabled.

• When OSD Portrait Mode is applied, Check Screen is turned off and deactivated.

• For enclosure models, the feature is activated regardless of the OSD Portrait setting.

Digital Audio Input

• HDMI/DISPLAYPORT/OPS: You can hear the sounds of the digital signals carried by HDMI, DISPLAYPORT, or OPS

through the monitor speakers.

• Audio In: you can hear sounds through the monitor speaker by connecting HDMI, or OPS or DISPLAYPORT ports to

the Audio In port.

• If Digital is selected in DVI-D when using OPS/HDMI3/DVI-D or OPS/DVI-D input, there will be no sound.

Speaker

• If you set this option to On, you can hear sounds through the monitor speaker. (* The monitor speaker is sold

separately.)

• If you set this option to Off, you cannot hear sounds through the monitor speaker.

USB Auto Playback

• This is a feature that auto-playbacks photos and videos when a USB device is connected. You can view photos and

videos without manually selecting the View Photos/Movies menu. However, this feature is unavailable while the

SuperSign contents are played.

• If you select Movie for USB Auto Playback, then the video files in the top level folder on the USB device will

automatically play in sequence. When switched on, Signage automatically searches and plays video files from a USB.

• If you select Photo for USB Auto Playback, then the image files in the top level folder on the USB device will

automatically play in sequence. When switched on, Signage automatically searches and plays photos from a USB.

(This feature is not supported in OLED models.)

ENGLISH

Andere Handbücher für 55EH5C

Inhaltsverzeichnis

Beliebte Digitale Beschilderung Handbücher anderer Marken

SMART-AVI

SMART-AVI SIGNAGEPRO Bedienungsanleitung

KeyWest Technology

KeyWest Technology BREEZE Bedienungsanleitung

XtendLan

XtendLan XL-DSP-183C Bedienungsanleitung

Dynascan

Dynascan DS861LR4 Bedienungsanleitung

Classic Exhibits

Classic Exhibits SEGUE DESIGNS MOD-1363 Bedienungsanleitung

protech

protech KT-7290 Bedienungsanleitung

WebDT

WebDT 515A Montageanleitung

Samsung

Samsung IWJ Series Bedienungsanleitung

EVERI

EVERI Enrollment Kiosk Bedienungsanleitung

NCR

NCR SelfServ 90 Handbuch

ViewSonic

ViewSonic EP4602 Bedienungsanleitung

ViewSonic

ViewSonic EP3202r Bedienungsanleitung

Samsung

Samsung OM46N Bedienungsanleitung

Viessmann

Viessmann 6336 Bedienungsanleitung

Osram

Osram Traxon Installationsanleitung

Philips

Philips Signage Solutions Series BDL4990VL Bedienungsanleitung

ViewSonic

ViewSonic EP5012-L Bedienungsanleitung

Philips

Philips CRD01/00 Bedienungsanleitung