LG 55LV77A-5B.AEK Bedienungsanleitung

www.lg.com

OWNER’S MANUAL

MONITOR SIGNAGE

55LV75A

55LV77A

Please read this manual carefully before operating your set and retain it

for future reference.

MONITOR SIGNAGE MODELS

ENG

ENGLISH

TABLE OF CONTENTS

4LICENSES

5ASSEMBLING AND

PREPARING

5 Accessories

6 Parts

7 To Install in a Portrait Layout

7 Remove L-brackets before Installation

8 STORAGE METHOD FOR PANEL

PROTECTION

8 - Correct Method

8 - Incorrect Method

9 Installing on a Wall

11 EXTERNAL EQUIPMENT SETUP

11 - IR RECEIVER

12 Tiling Displays

12 - How to Mount the Set

13 - How to Join Sets

14 REMOTE CONTROL

16 Displaying the Device Name Connected

to an Input Port

17 USING THE MONITOR SET

17 Connecting to a PC

17 - RGB Connection

18 - DVI Connection

18 - HDMI Connection

19 - Display Port Connection

19 - IR Receiver Connection

20 Adjusting the Screen

20 - Selecting an Image Mode

20 - Customizing Image Options

21 - Customizing PC Display Options

22 Using Additional Options

22 - Adjusting Aspect Ratio

24 - Using the Input List

25 ENTERTAINMENT

25 - Connecting to a Wired Network

26 - Network Status

27 - Connecting USB Storage Devices

28 - Browsing Files

30 - Viewing Movies

33 - Viewing Photos

36 - Listening to Music

38 - Viewing the Contents List

39 - DivX® VOD Guide

40 - Using PIP/PBP

41 CUSTOMIZING SETTINGS

41 Accessing the Main Menus

42 - PICTURE Settings

45 - AUDIO Settings

46 - TIME Settings

47 - OPTION Settings

52 Picture ID

53 - NETWORK Settings

54 MAKING CONNECTIONS

55 External Device Connection

55 - DVI Connection

55 - HDMI Connection

56 - Component Connection

56 - AV(CVBS) Connection

57 - Audio Connection

57 Connecting to the LAN

57 Connecting to a USB

58 Daisy Chain Monitors

58 - Using the Multi Display Mode function

59 TROUBLESHOOTING

61 SPECIFICATIONS

ENG

ENGLISH

TABLE OF CONTENTS

65 IR CODES

66 CONTROLLING THE MULTIPLE

PRODUCT

66 Connecting the cable

66 RS-232C Configurations

66 Communication Parameter

67 Command Reference List

69 Transmission / Receiving Protocol

ENGLISH

4LICENSES

LICENSES

Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the

HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC

in the United States and other countries.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a

subsidiary of Rovi Corporation.

This is an official DivX Certified® device that has passed rigorous testing to

verify that it plays DivX video.

Visit divx.com for more information and software tools to convert your files

into DivX videos.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be

registered in order to play purchased DivX Video-on-Demand (VOD) movies

To obtain your registration code, locate the DivX VOD section in your device

setup menu. Go to vod.divx.com for more information on how to complete

your registration.

DivX Certified® to play DivX® video up to HD 1080p, including premium

content.

DivX®, DivX Certified® and associated logos are trademarks of Rovi

Corporation or its subsidiaries and are used under license.

Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668;

7,515,710; 7,519,274

Manufactured under license from Dolby Laboratories. Dolby and the

double-D symbol are trademarks of Dolby Laboratories.

yProduct damage from moving or changing the installation location is not covered by warranty.

yThe warranty will not cover any damages caused by using the product in an excessively dusty

environment.

NOTE

ENG

ENGLISH

ASSEMBLING AND PREPARING

Accessories

Check your product box for the following items. If there are any missing accessories, contact the local

dealer where you purchased your product. The illustrations in this manual may differ from the actual product

and accessories.

yDo not use any pirated items to ensure the safety and product life span.

yAny damages or injuries by using pirated items are not covered by the warranty.

CAUTION

yThe accessories supplied with your product may vary depending on the model.

yProduct specifications or contents in this manual may be changed without prior notice due to upgrade

of product functions.

NOTE

Remote Control

and Batteries

Power Cord IR Receiver RS-232C Cable

DP Cable

M4 x 6L

Screws (8 ea)

M6 x 10L

Screws (4 ea)

CD (Owner's Manual,

SuperSign Elite Program/

Manual) / Cards

Mounting Cable Tie (2 ea)

(For Cable Arrangement)

Tiling Guide (4 ea)

ENG

ENGLISH

ASSEMBLING AND PREPARING

Parts

ENG

ENGLISH

ASSEMBLING AND PREPARING

To Install in a Portrait Layout

When installing in a Portrait Layout, rotate the monitor clockwise 90 degrees (when facing the screen).

Remove L-brackets before Installation

Remove the L-brackets from each corner of the monitor before installing it.

yKeep the removed L-brackets and use them when moving the monitor later.

NOTE

ENG

ENGLISH

ASSEMBLING AND PREPARING

Correct Method Incorrect Method

STORAGE METHOD FOR PANEL PROTECTION

If the product needs to be set upright, hold both

sides of the product, and tilt backward carefully

for. Do not let the panel not to touch the floor.

When laying down the product, lay a cushion on a

flat floor. Put the product on it with the panel of

the product facing down.

If there is not a cushion available, ensure the floor

is clean and then lay the product down carefully

with the panel facing either upward or downward.

At this time, be careful for objects not to fall on the

panel.

If the product is tilted onto the bezel, the bottom of

the panel may be damaged.

If the product is tilted onto the edge of the panel,

the panel may be damaged.

Panel

Panel Cushion

Panel

ENG

ENGLISH

ASSEMBLING AND PREPARING

yDisconnect the power cord first, and then

move or install the monitor set. Otherwise

electric shock may occur.

yIf you install the monitor set on a ceiling or

slanted wall, it may fall and result in severe

injury.

yDo not over tighten the screws as this may

cause damage to the monitor set and void

your warranty.

yUse the screws and wall mounts that meet

the VESA standard. Any damages or injuries

by misuse or using an improper accessory

are not covered by the warranty.

yTo prevent injury, this apparatus must be

securely attached to the wall in accordance

with the instrallation instructions. (This only

ypertains to Australia and New Zealand.)

CAUTION

NOTE

Do not install the product in a place with

no ventilation (e.g., on a bookshelf or in a

closet) or on a carpet or cushion. If there is

no other option but to mount the product on

the wall, make sure that sufcient ventilation

is provided before installation.

- Failure to do so may result in a re due to

the increase in the internal temperature.

Install the monitor at least 10 cm away from the

wall and leave about 20 cm of space at each side

of the monitor to ensure sufficient ventilation.

Use the wall mount plate and screws that comply

with the VESA standard.

Installing on a Wall

To install the Monitor on a wall (optional),

use the VESA screws provided as accessories to

fasten it.

10 cm

10 cm 10 cm

20 cm

ENG

ENGLISH

ASSEMBLING AND PREPARING

Securing the product to a wall (optional)

(Depending on model)

1Insert and tighten the eye-bolts, or product

brackets and bolts on the back of the product.

- If there are bolts inserted at the eye-bolts

position, remove the bolts first.

2Mount the wall brackets with the bolts to the

wall.

Match the location of the wall bracket and the

eye-bolts on the rear of the product.

3Connect the eye-bolts and wall brackets tightly

with a sturdy rope.

Make sure to keep the rope horizontal with the

flat surface.

NOTE

yMake sure that children do not climb on or

hang on the product.

yUse a platform or cabinet that is strong and

large enough to support the product securely.

yBrackets, bolts, and ropes are optional. You

can obtain additional accessories from your

local dealer.

yThe illustration shows a general example of

installation and may look different from the

actual product.

CAUTION

yIf a product is not positioned in a sufficiently

stable location, it can be potentially

hazardous due to falling. Many injuries,

particularly to children, can be avoided by

taking simple precautions such as:

»Using cabinets or stands recommended

by the manufacturer of the product.

»Only using furniture that can safely

support the product.

»Ensuring the product is not overhanging

the edge of the supporting furniture.

»Not placing the product on tall furniture

(for example, cupboards or bookcases)

without anchoring both the furniture and

the product to a suitable support.

»Not standing the product on cloth or other

materials placed between the product

and supporting furniture.

»Educating children about the dangers of

climbing on furniture to reach the product

or its controls.

WARNING

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Digitale Beschilderung Handbücher anderer Marken

KeyWest Technology

KeyWest Technology BREEZE Bedienungsanleitung

XtendLan

XtendLan XL-DSP-183C Bedienungsanleitung

Dynascan

Dynascan DS861LR4 Bedienungsanleitung

Classic Exhibits

Classic Exhibits SEGUE DESIGNS MOD-1363 Bedienungsanleitung

protech

protech KT-7290 Bedienungsanleitung

WebDT

WebDT 515A Montageanleitung

Samsung

Samsung IWJ Series Bedienungsanleitung

EVERI

EVERI Enrollment Kiosk Bedienungsanleitung

NCR

NCR SelfServ 90 Handbuch

ViewSonic

ViewSonic EP4602 Bedienungsanleitung

ViewSonic

ViewSonic EP3202r Bedienungsanleitung

Samsung

Samsung OM46N Bedienungsanleitung

Viessmann

Viessmann 6336 Bedienungsanleitung

Osram

Osram Traxon Installationsanleitung

Philips

Philips Signage Solutions Series BDL4990VL Bedienungsanleitung

ViewSonic

ViewSonic EP5012-L Bedienungsanleitung

Philips

Philips CRD01/00 Bedienungsanleitung

peerless-AV

peerless-AV KIPC540-EUK Bedienungsanleitung