LG 60UL3E Bedienungsanleitung

INSTALLATION MANUAL

Please read this manual carefully before operating your set and

retain it for future reference.

60UL3E

70UL3E

www.lg.com

LG Digital Signage

(MONITOR SIGNAGE)

ENGLISH

Table of contents

3 Location and Function of Controls

3 Parts and Button

3 Basic functions

4 First Use Wizard

4 Language & Location

5 Installation Menu

5 Introduction

6 Public Display Settings

6 - Public Display Settings

6 - Power On Status

7 - Volume

7 - Key Management

8 - Limited Mode

9 - Power On Default

9 - Aux Source Setting

9 - Power Management

9 - Factory Reset

10 Network

10 - MAC Address

10 - Network Setting

11 - Wake On LAN

11 - Server Setting

12 General

12 - Configuration Setup

14 - Set ID Setup

14 - Power Saving

15 - HCEC Setup

16 - Clock Setup

16 - Password Change

16 - Lock Mode

16 - Crestron

17 Signage Manager

24 - USB Download Menu

25 KEY CODES

26 EXTERNAL CONTROL DEVICE SETUP

26 RS-232C Setup

26 USB to Serial converter with USB Cable

26 RS-232C with RS-232C Cable

27 Set ID

28 Communication Parameters

28 Command reference list

29 TRANSMISSION / RECEIVING

PROTOCOL

ENGLISH

Location and Function of Controls

Parts and Button

Basic functions

Power On (Press)

Power O1(Press and Hold)

Menu Control (Press2)

Menu Selection (Press and Hold3)

1 All running apps will close.

2 You can access and adjust the menu by pressing the button when Signage is on.

3 You can use the function when you access menu control.

ENGLISH

First Use Wizard

* Image shown may differ from your Signage.

Language & Location

(Depending upon model)

•Select the Language and Country. Some countries need to select the Time Zone.

ENGLISH

Installation Menu

* Image shown may differ from your Signage.

Introduction

The abundant functions for Signage linked with software installation can be projected on OSD as‘Installation

Menu’.

The wide range of features can be performed simply on additional window to enhance the Signage’s easy

installation and convenient operation for System Integrators.

1 Press the Setting button for more than 5 seconds using the user remote control, banner will appear at top left

on the screen.

2 Enter a four digit password and press button.

-The initial password“1-1-0-5”.

ENGLISH

Public Display Settings

When ‘Public Display Settings’is set to On (Work), all functions of Public Display Mode apply.

Public Display Settings

•Decide to work all functions of ‘Public Display Settings’or not by setting ‘Public Display Settings’as On (Work)

or O (Do Not Work).

•When ‘Public Display Settings’is set to On (Work), all functions of Public Display Mode apply.

•When ‘Public Display Settings’is set to O (Do Not Work), all functions of Public Display Mode Do Not apply.

•When it is set to ‘On’, all items reserved at the Schedule list are deleted and the reservation function is not

supported. (applied for the model oering the reservation function)

Power On Status

•Decide to select working status of Signage Set when turn on main power.

•You can set with PWR, STD, LST.

•PWR always make Signage set On status when turn on main power.

•STD make Stand-by status when turn on main power.

•LST make Signage Set work like previous power status. As same concept as Power Backup mode; If main power

were turned o in Power On status, Signage Set would work in On status. If main power were turned o in

Stand-by status, Signage Set would work in Stand-by status.

•If there Block All is both IR Operation and Local Key Operation from Key Management, In order to provide the

Option that must be able to turn on the Signage in the Signage turned o situation, change the value of the

PWR. (Reference the Key Management)

ENGLISH

Volume

•Decide to apply volume policy of ‘Start Volume’, ‘Maximum Volume’ and ‘Minimum Volume’as On (Work) or O

(Do Not Work).

•(0 ≤ Min ≤ Start ≤ Max ≤ 100)

Start Volume

•This entry sets the start volume level when is power on.

-The level is specified as a number between minimum volume to maximum value. (Min ≤ Start ≤ Max)

-The default setting is ‘Off’ (disabled).

-When enabled, if the value is lower than the minimum specified in the minimum volume entry, the

minimum volume entry must be used.

-When enabled, if the value is larger than the maximum specified in the maximum volume entry, the

maximum volume value must be used.

Maximum Volume

•This entry sets the maximum volume level the set. The level is specied as a number between ‘Minimum

Volume’to 100. (Min ≤ Max ≤ 100).

-If the command volume up to higher than maximum volume’ is received, that should be ignored.

-The default value is 100.

Minimum Volume

•This entry sets the minimum volume level the set will produce.

-The level is specified as a number between 0 to‘Maximum Volume’. (0 ≤ Min ≤ Max)

-If the command volume down to lower than minimum volume is received, that should be ignored.

-The default value is 0.

Key Management

•Manage key usability of Local(Front) Key and Remote Control. When selected to ‘On’, following‘IR Operation’

and ‘Local Key Operation’ will be worked by below.

IR Operation

•Decide whether work the LG remote control or not.

-When ‘IR Operation’is set to 'Normal', all remote keys are available.

-'Use PWR Only' makes block all remote keys except power key.

-When ‘IR Operation’is set to 'Block All', all normal remote keys don’t work.

Local Key Operation

•Decide to operate 'Local/Front Key' working behavior by setting ‘Local Key Operation’ as 'Normal', 'Use PWR

Only' and 'Block All'.

-When ‘Local Key Operation’ is set to 'Normal', all local keys are available.

-'Use PWR Only' makes block all local keys except power key.

-When ‘Local Key Operation’ is set to 'Block All', all local keys don’t work.

ENGLISH

Limited Mode

•Congure Signage function’s limitation. When selected to‘On’, following sub-menus will be worked by below.

Menu Display

•Function to decide whether work with menu (including relevant menus too) of control key (On – Enter

possible) or not (O – Enter Impossible).

-Although select Off (Enter impossible), the action that press a Menu button for 5 seconds to enter

‘Installation Menu’is available.

-When select On (Enter possible), Menu works.

OSD Display

•Decide to display OSD or not by setting‘OSD Display’ as On (Display) or O (Do not Display).

-When ‘OSD Display’ is set to ‘Off’(Do not Display), all OSD is not displayed except some exception.

-Although select ‘Off’ (Do not Display), the action that press a Menu button for 5 seconds to enter

‘Installation Menu’and entering service menu are available. (In-Start, Power-Only, Adjust, Installation

Menu...)

System Provider Mode

•‘System Provider Mode’allows access to the menu system from the front panel or remote control but access is

controlled as follows:

-When value is ‘On’, Accessible Items on the menu system, others are not permissible. (Depending upon

model)

» Input select screens

» Sleep timer

» Aspect Ratio

» 'Photo & Video' / Music' / ‘Network’ / ‘Bluetooth’Menu.

» Input Manager

ENGLISH

Power On Default

•Set to On (Work) or O (Do Not Work).

•When ‘Power On Default’ is set to O, it is not applied to the subordinate Input, A/V Setting, Aspect Ratio

menu.

•When Power On Default is set to On, it can set by entering the subordinate menu.

Input

•Set whether it is turned on by the set input source or by the last stored input source.

A/V Setting

•If ‘A/V Setting’is changed from ‘O’ to ‘On’, A/V parameters that are set before entering‘Installation Menu’are

applied whenever turn on power.

Aspect Ratio

•The aspect ratio determines the default aspect ratio that the set returns to on power up.

Aux Source Setting

•Set to On (Work) or O (Do Not Work).

•The Auxiliary (Input) Source Setting feature will enable or disable for each external input.

•User cannot disable the current input’s ‘Aux Source Setting’.

Power Management

•The Power Management feature will turn o the Signage if no input control command is received from either

the Local or IR Key within selected hours.

-Activity on either of these inputs shall reset the ‘Power Management’ timer and prevent interruption of

Signage viewing.

-This entry can be set to a value which is corresponding to the desired hours (1 hour to 7 hours).

-Default value is ‘Off (disabled)’.

Factory Reset

•Change all settings to their default values.

ENGLISH

Network

MAC Address

•Displays the MAC address (not customizable).

Network Setting

One-click network connection

•Connects easily to a wired network.

•This menu supports to connect to an available network.

To connect to a network through Set Expert

•For use in special circumstances such as in oces (in cases where a static IP is used).

1 Select a network connection.

2 When connecting via Wired, Congures the IP settings of the Signage set. You can set the IP address,

subnet mask, gateway and DNS server.

Andere Handbücher für 60UL3E

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere LG Digitale Beschilderung Handbücher

Beliebte Digitale Beschilderung Handbücher anderer Marken

KeyWest Technology

KeyWest Technology BREEZE Bedienungsanleitung

XtendLan

XtendLan XL-DSP-183C Bedienungsanleitung

Dynascan

Dynascan DS861LR4 Bedienungsanleitung

Classic Exhibits

Classic Exhibits SEGUE DESIGNS MOD-1363 Bedienungsanleitung

protech

protech KT-7290 Bedienungsanleitung

WebDT

WebDT 515A Montageanleitung

Samsung

Samsung IWJ Series Bedienungsanleitung

EVERI

EVERI Enrollment Kiosk Bedienungsanleitung

NCR

NCR SelfServ 90 Handbuch

ViewSonic

ViewSonic EP4602 Bedienungsanleitung

ViewSonic

ViewSonic EP3202r Bedienungsanleitung

Samsung

Samsung OM46N Bedienungsanleitung

Viessmann

Viessmann 6336 Bedienungsanleitung

Osram

Osram Traxon Installationsanleitung

Philips

Philips Signage Solutions Series BDL4990VL Bedienungsanleitung

ViewSonic

ViewSonic EP5012-L Bedienungsanleitung

Philips

Philips CRD01/00 Bedienungsanleitung

peerless-AV

peerless-AV KIPC540-EUK Bedienungsanleitung