LG DLEY1701 Bedienungsanleitung

ELECTRIC & GAS DRYER

SERVICE MANUAL

CAUTION

READ THIS MANUAL CAREFULLY IN ORDER TO

PROPERLY DIAGNOSE PROBLEMS AND TO SAFELY

PROVIDE QUALITY SERVICE ON THESE DRYERS.

U.S.A Website: http://us.lgservice.com

Canadian Website: http://lg.ca

DLEY1701*E, DLGY1702*E

Any reproduction, duplication, distribution (including by way of email, facsimile or other electronic means), publication,

modication, copying or transmission of this Service Manual is STRICTLY PROHIBITED unless you have obtained the

prior written consent of the LG Electronics entity from which you received this Service Manual. The material covered by

this prohibition includes, without limitation, any text, graphics or logos in this Service Manual.

To avoid personal inju ry, disconnect power before se rvicing this product. If electrical power is required

for diagnosis or test purposes, disconnect the power immediately after pe rforming the necessary checks.

To reduce the risk of personal injury, adhere to all industry recommended safety procedures including the

use of long sleeved gloves and safety glasses. Failure to follow all of the safety warnings in this manual

could result in property damage, personal injury or death.

WARNING !

WHAT DO IF YOU SMELL GAS :

IMPORTANT SAFETY NOTICE

The information in this service guide is intended for use by individuals possessing skill and experience in

electrical, electronic, and mechanical appliance repair. Any attempt to repair a major appliance may result

in personal injury and property damage. The manufacturer or seller cannot be responsible for the

interpretation of this information, nor can it assume any liability in connection with its use.

RECONNECT ALL GROUNDING DEVICES

If grounding wires, screws, straps, clips, nuts, or washers used to complete a path to ground are

removed for service, they must be returned to their original position and properly fastened.

IMPORTANT

Electrostatic Discharge (ESD)

Sensitive Electronics

ESD problems are present everywhere. ESD may damage or weaken the electronic control

assembly. The new control assembly may appear to work well after repair is finished,

but failure may occur at a later due to ESD stress.

Touch your finger repeatedly to a green ground connection point or unpainted metal in the

appliance.

Use an anti-static wrist strap. Connect wrist strap to green ground connection point or unpainted

metal in the appliance. - OR -

Before removing the part from its package, touch the anti-static bag to a green ground connection

point or unpainted metal in the appliance.



Avoid touching electronic parts or terminal contacts; handle electronic control assembly by edges only.

When repackaging failed electronic control assembly in anti-static bag, observe above instructions.

Do not try to light a match, or cigarette, or turn on

any gas or electrical appliance.

Do not touch any electrical switches. Do not use

any phone in your building.

Clear the room, building or area of all occupants.

Immediately call your gas supplier from a

neighbor’s phone. Follow the gas supplier’s

instructions carefully.

If you cannot reach your gas supplier, call the fire

department.

CONTENTS

1. SPECIFICATIONS.................................................................................................................. 4

2. FEATURES AND BENEFITS ................................................................................................. 6

3. INSTALLATION INSTRUCTIONS.......................................................................................... 6

4. DRYER CYCLE PROCESS ................................................................................................. 10

5. COMPONENT TESTING INFORMATION ........................................................................... 11

6. MOTOR DIAGRAM AND SCHEMATIC................................................................................ 14

7. WIRING DIAGRAM .............................................................................................................. 15

8. FLOW SENSOR FUNCTION ............................................................................................... 16

8-1. FLOW SENSOR........................................................................................................... 16

8-2. INSTALLATION TEST................................................................................................... 17

8-3. TROUBLESHOOTING FOR FLOW SENSOR DRYER ................................................ 19

9. DIAGNOSTIC TEST............................................................................................................. 20

9-1. TEST 1 120V AC ELECTRICAL SUPPLY .................................................................... 21

9-2. TEST 2 THERMISTOR TEST - MEASURE WITH POWER OFF ................................. 22

9-3. TEST 3 MOTOR TEST.................................................................................................. 23

9-4. TEST 4 MOISTURE SENSOR...................................................................................... 24

9-5. TEST 5 DOOR SWITCH TEST..................................................................................... 25

9-6. TEST 6 HEATER SWITCH TEST - ELECTRIC TYPE.................................................. 26

9-7. TEST 7 GAS VALVE TEST - GAS TYPE...................................................................... 27

10. CHANGE GAS SETTING (NATURAL GAS, PROPANE GAS).......................................... 28

11. DISASSEMBLY INSTRUCTIONS .................................................................................... 30

12. DOOR REVERSE............................................................................................................... 42

13. SCREW POSITION............................................................................................................ 48

14. Tag On................................................................................................................................ 50

15. EXPLODED VIEW.............................................................................................................. 57

15-1-1. CONTROL PANEL AND PLATE ASSEMBLY: ELECTRIC TYPE ......................... 57

15-1-2. CONTROL PANEL AND PLATE ASSEMBLY: GAS TYPE ................................... 58

15-2-1. CABINET & DOOR ASSEMBLY:ELECTRIC TYPE............................................... 59

15-2-2. CABINET & DOOR ASSEMBLY:GAS TYPE......................................................... 60

15-3-1. DRUM AND MOTOR ASSEMBLY: ELECTRIC TYPE.......................................... 61

15-3-2. DRUM AND MOTOR ASSEMBLY: GAS TYPE..................................................... 62

rights reserved. Only training and service purposes.

1SPECIFICATIONS

Name: Electric and Gas Dryer

Power supply: Refer to the rating label on the dryer.

Gas: 120 VAC Electric: 240VAC

Specifications are subject to change by manufacturer.

Size: 27”X 403/16

”X 29”(inch)

Dryer capacity: IEC 7.3 cu.ft.

Weight: Gas 137.9 Ibs (62.54kg)

Electric 135.1lbs (61.28kg)

See page 6 of this manual for usage instruction.

Dryer rack (1 each)

ACCESSORIES

Yconnector Hose

Included accessories

Sound levels

3(High/Low/off)

ITEM DLEY1701*E DLGY1702*E REMARK

Blue White / Stainless Silver

Silver / Black

Color

ELEC.

GAS

Top Plate

Door Trim

ELECTRICITY

CONSUMPTION

MOTOR

HEATER

LAMP

GAS VALVE

CONTROL TYPE

DRUM CAPACITY

Weight (lbs) - Net

No. of Programs

No. of Dry Options

No. of Temperature Controls

Moisture

Temperature

No. of Dry Levels

Reversible Door

Drum

Child Lock

Interior Light

Product (WxHxD)

Packing (WxHxD)

Sensor

POWER

SUPPLY

Material &

Finish

Chrome

120/240V 60Hz (26A)/120/208V 60Hz (23A)

120V/60Hz (11.5A)

250W (4.5A)

5400W (22.5A)

4100W (21A)

15 W (0.2A)

13 W (0.11A) x 2

Electronic

7.3 cu.ft.

Gas 137.9Ibs (62.54kg), Electric 135.1lbs (61.28kg)

Available

Stainless Steel

Available

”

403/16

”

x 29

”

(inch)

”

403”

x 30

”

(inch)

AC 120V

AC 240V(ELECTRIC MODEL)

AC 208V(ELECTRIC MODEL)

AC 120V

DC 12V

AC 120V(GAS MODEL)

INLET VALVE 14

Thermistor

Electrode sensor

2FEATURES AND BENEFITS

3INSTALLATION INSTRUCTIONS

Open the door.

Hold the dryer rack

with both hands.

Put the dryer rack into

the drum Check and be sure that the

front of the rack is properly

seated on the lint filter.

Use the instructions under option 2 or 3 if your

home has a 3-wire receptacle (NEMA type 10-30R)

Use option 2 if local codes and ordinances permit

the connection of a chassis ground to the neutral

connector If this is not permitted, use option 3

            

3-1. Connecting Electric Dryers

If this type is available at your home you will be

connecting to a fused disconnect or circuit breaker

box

 

Grounding through the neutral conductor

is prohibited for (1) new branch-circuit installations,

(2) mobile homes, and (3) recreational vehicles, and

(4) areas where local codes prohibit grounding through

the neutral conductor

Prepare minimum 5 ft (1 52 m) of length in order for

dryer to be replaced

First, peel 5 inches (12 7 cm) of covering material from

end Make a 5 inches of ground wire bared After cutting

/2inches (3 8 cm) from 3 other wires peel insulation

back 1inch (2 5 cm) Make ends of 3 wires a hook

shape

Then, put the hooked shape end of the wire under the

screw of the terminal block(hooked end facing rightward)

and pinch the hook together and screw tightly

Use the instructions under option 1 if your home

has a 4-wire receptacle (NEMA type 14-30R)

If this type is available at your home you will be

connecting to a fused disconnect or circuit breaker

box

1 Connect neutral wire(white) of power cord to center

terminal block screw

2 Connect red and black wire to the left and right

terminal block screws

3 Connect ground wire(green) of power cord to external

ground screw and move neutral ground wire of

appliance and connect it to center screw

4 Make sure that the strain relief screw is tightened

and be sure that all terminal block nuts are on tight and

power cord is in right position

(2.5 cm)

(12.7 cm)

 

 

  !"

 

  !!"

 

(12.7 cm)

   # 

(2.5 cm)

(12.7 cm)

4DRYER CYCLE PROCESS

STEAM

FRESHTM

BULKY/

BEDDING

CASUAL

EXPRESS DRY

HIGH

HIGH Off 18min

Off 14min

Elec:67

Gas:73

28min

32min

WRINKLE

FREE

68±4℃

155±7℉

66±4℃

151±7℉

The Energy Saver option is turned on by default in the Cotton/Normal cycle.

Turn off the Energy Saver option for a faster Normal cycle which begins with heated drying.

To turn the Energy Saver default off, press and hold the Wrinkle Care button for three seconds.

ON or OFF appears in the display.

Note

* Sensor dry: Dry Level is set by users.

** Manual dry: Temperature control is set by users.

Default settings can be adjusted by users.

Andere Handbücher für DLEY1701

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere LG Trockner Handbücher

LG DLE2250 Series Bedienungsanleitung

LG DLE7150W Bedienungsanleitung

LG DLGX4371K Bedienungsanleitung

LG Tromm DLEX7177RM Bedienungsanleitung

LG DLEC733W Installationsanleitung

LG TD-V70120E Bedienungsanleitung

LG SteamDryer DLEX5101 Bedienungsanleitung

LG DLGX5102V Bedienungsanleitung

LG DLEX4070 Bedienungsanleitung

LG DLEX3700 series Bedienungsanleitung

LG SteamDryer LSDG389VS Bedienungsanleitung

LG RC8011A Bedienungsanleitung

LG DLE5001W Bedienungsanleitung

LG DLEX7600 SERIES Bedienungsanleitung

LG DLEX8500 Series Bedienungsanleitung

LG DLEX3570 series Bedienungsanleitung

LG WT1201CW Bedienungsanleitung

LG GD1329CES Bedienungsanleitung

LG DLEY1701 Bedienungsanleitung

LG DLHX4072V Bedienungsanleitung

LG DLE0442W Bedienungsanleitung

LG DLE0332W Bedienungsanleitung

LG DLGX4001 Series Bedienungsanleitung

Beliebte Trockner Handbücher anderer Marken

Bosch

Bosch WTA79200GB Bedienungsanleitung

Amana

Amana W10233410A Bedienungsanleitung

Asko

Asko T760 Bedienungsanleitung

Bosch

Bosch Logixx 10 WTB76556GB Technisches Datenblatt

Electrolux

Electrolux EW2H328R2 Bedienungsanleitung

Beko

Beko DS8433RX1M Bedienungsanleitung

Dawlance

Dawlance Spinner DS 6000 C Bedienungsanleitung

Electrolux

Electrolux TP5080TW Bedienungsanleitung

AEG

AEG TR838P4OB Bedienungsanleitung

Indesit

Indesit IDV 75 Bedienungsanleitung

Infiniton

Infiniton SD-DG85C Bedienungsanleitung

BOMANN

BOMANN WT 5019 Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems TMB795C Bedienungsanleitung

Asko

Asko T793C Bedienungsanleitung

Kenmore

Kenmore 8041 - 5.8 cu. Ft. Capacity Electric Dryer Bedienungsanleitung

Frigidaire

Frigidaire CAQE7077KW0 Betriebsanleitung

Bosch

Bosch WTX8HKM9SN Bedienungsanleitung

Sharp

Sharp KD-NHH9S7GW2-PL Bedienungsanleitung