LG HBM-W600 Bedienungsanleitung

English

Español

Rev 1.0 US

LG Electronics Inc., 2012

Note: For the best performance and to prevent

any damage to, or misuse of the HBM-W600,

please read all of the information

carefully before to use.

WARNING :

This product contains chemicals known to the State of California

to cause cancer and birth defects or reproductive harm.

Wash hands after handling.

LG Electronics

BLUETOOTH®Headset

HBM-W600 User Manual

2 3

ENG

Introduction 3

- Included in package 3

Description of Parts 4

How to Use 4

- Change Direction 4

- Charging 5

- Low Battery 5

- Battery Status Alert 5

- Power On 5

- Power Off 5

- Pairing 6

- Auto-Reconnect 7

- Volume Control 7

- Calling 7

• Answering a call 7

• Making a call 7

• Voice dialing 8

• Last number redial 8

• Ending a call 8

• Transferring a call 8

• Call waiting 8

• Call reject 8

• Mic mute 8

- Advanced Multipoint 9

- Audio Streaming (A2DP) 10

- HD Voice 10

- SMS Reader 10

Summary of Button Functions 11

LED Indication 12

Troubleshooting 12

Specification 13

Precautions 13

Declaration of Confirmation 14

Additional Information 14

Limited Warranty 17

Important Safety Information 17

Table of Contents

2 3

ENG

Included in the Package

The LG HBM-W600 is a light weight wireless headset that uses Bluetooth®

technology.

This product can be used as an audio accessory for devices that support the

headset, hands-free or A2DP Bluetooth proles.

LG HBM-W600

Bluetooth®Headset Ear Loop Charger

User Manual Warranty CardNFC Tag Ear Buds(2)

Introduction

4 5

ENG

Change Direction

Power/Call Button

Volume Up/Down

Button

LED Indicator

Wireless

Charging Area

Microphone

Charging Port

Speaker

Left Right

Front

Back

Description of Parts

How to Use

4 5

ENG

Charging

1) Adaptor Charging

- When the charger is connected with power on or off, the headset will turn off.

- While charging, the LED indicator of HBM-W600 will show a solid white light

- The buttons will not function while the device is charging.

- It takes 2 hours to fully charge the headset.

- When charging is complete, the LED indicator of HBM-W600 will turn off.

2) Wireless Charging

- When HBM-W600 is placed on the LG WCP-700 Wireless

Charging Pad, the headset will remain on.

- While charging, the LED indicator of HBM-W600 will blink.

- It takes 2 hours to fully charge the headset.

- When charging is completed, the LED indicator of pad will turn solid green.

Low Battery

- An announcement will play once every 2 minutes.

- If the battery is not charged, the headset will turn off.

Power On

Press and hold the POWER/CALL button for 3 seconds.

• The power will turn on and a startup tone will play.

- The audible battery status alert will let you know the battery level.

Power Off

- Press and hold the POWER/CALL button for 3 seconds.

• A shutdown tone will play, the Bluetooth link will disconnect and the power will

turn off.

Battery Status Alert

- By pressing and holding the VOLUME DOWN button for 3 seconds, you can check

the battery status of the HBM-W600. The audible battery status alert will inform you

of the battery level. There are 3 levels of battery power:

1. Battery High

2. Battery Medium

3. Battery Low

How to Use

6 7

ENG

- Before using the headset for the rst time, it must be paired with a Bluetooth

enabled device.

- There are 2 pairing modes with the HBM-W600.

1) Easy Pairing

a) Press and hold the POWER/CALL button for 3 seconds to turn on the

HBM-W600.

b) The headset will enter auto-reconnect mode for 10 seconds.

(If your headset has already been paired with a device, the headset will

automatically reconnect to the device when the HBM-W600 is powered on.)

c) After 10 seconds, the HBM-W600 will automatically enter pairing mode.

d) When the headset enters pairing mode, the LED indicator will show a solid

white light.

e) Using your handset, nd the Bluetooth menu and “search for” or “add” new

devices.

f) Select “LG HBM-W600” from the list of devices to pair it with your device.

g) If you are asked for a passkey or PIN during pairing, please enter “0000”

(4 zeros).

h) Once the devices are paired, you will hear “Headset paired”.

i) After pairing has been completed, make sure you “connect” to the

LG HBM-W600.

j) If you want to pair with a different device in the future, the headset must be

placed into pairing mode.

k) If the headset is in pairing mode for 3 minutes without being connected to a

device, the HBM-W600 will automatically turn off.

2) Manual Pairing

a) With the power off, press and hold the POWER/CALL button for 6 seconds.

b) Continue pairing process from letter “e)” above.

3) NFC Pairing a) Place HBM-W600 into pairing mode.

b) Touch NFC and Bluetooth enabled handset to

NFC tag.

c) NFC and Bluetooth enabled handset will connect with

the HBM-W600 automatically.

NOTE:

Place the NFC tag on the center of handset’s

battery door with NFC pairing feature.

Pairing

How to Use

6 7

ENG

Volume Control

- Press the VOLUME UP or VOLUME DOWN button to adjust the speaker volume.

- There are eight levels of speaker volume.

- To avoid hearing loss at high volume, HBM-W600 will play a warning tone when the

volume is raised into the upper 3 levels.

Calling

Answering a call

- When there is an incoming call, the headset will ring.

- Briey press and release the POWER/CALL button to answer the incoming call.

Making a call

- If you make a call from the connected handset, the call will (depending on the phone

settings) automatically transfer to the headset. If the call is not automatically transferred,

you can manually transfer the call by briey pressing the POWER/CALL button on the

HBM-W600 (handset and headset must be paired).

How to Use

Auto-Reconnect

- If the HBM-W600 is turned off (either accidentally or intentionally) while connected,

the headset will disconnect from the device.

The headset and handset will automatically reconnect when the HBM-W600 is

turned back on (provided that both devices are within the required range of 33 feet

(10 meters).

Out of range

- When the connected device and the HBM-W600 are separated by a range of

33 feet (10 meters) or more, the headset will alert the user with a beep, and the

headset and device will disconnect.

- When the device and the HBM-W600 are within the required range again, the

HBM-W600 will automatically reconnect to the device.

- If the headset and device do not automatically reconnect when they are back within

the required range, briey press the POWER/CALL button on the HBM-W600 to

reconnect manually.

- While trying to reconnect, your headset will beep and the LED indicator will icker

twice every 5 seconds.

- If the headset does not reconnect within 60 minutes, it will turn off.

8 9

ENG

Voice dialing

- Briey press the POWER/CALL button to activate “Voice dialing”.

For best results, record the voice dialing tag through your headset.

NOTE: If your handset does not support voice dialing, this action may activate Last

Number Redial.

Last number redial

- Press and hold the POWER/CALL button for 1 second to activate “Last number redial”.

The headset will beep and then call the last number dialed.

* Feature will not work if held for longer than 1 second.

Ending a call

- Briey press the POWER/CALL button.

Transferring a call

- While on a call on your handset, briey press the POWER/CALL button to transfer the

audio to the headset (the headset and handset must be paired).

- To transfer a call from the headset to handset, press and hold the VOLUME UP button

for 3 seconds.

Call waiting

- Answer a second call without hanging up the rst by pressing the CALL button for 1

second (You will hear a beep). Press the POWER/CALL button for 1 second to return

to the original call.

- Briey press the POWER/CALL button to end the active call or both calls at once.

(subject to handset support)

Call reject

- Activate call reject by pressing the POWER/CALL button for 1 second when the

handset rings.

* These functions may only be used if your handset supports them.

For further information about using these features, please consult your handset’s user

manual.

Mic mute

- Press and hold the VOLUME UP and VOLUME DOWN buttons simultaneously for 1

second to mute/unmute the mic during conversation.

How to Use

8 9

ENG

Advanced Multipoint

The HBM-W600 is capable of having two devices connected to the headset at the

same time. This will give you the freedom of using call waiting between calls on both

of your connected phones.

Connection

- Pair the headset with one of your Bluetooth-enabled handsets (per the pairing

instructions on page 6).

- Turn off the headset.

- With the power off, press the POWER/CALL button and move the power switch to

the ‘ON’ position at the same time for 4 seconds to enter Manual Pairing mode.

- Now, pair and connect the headset with your other Bluetooth-enabled handset.

(This will be your primary handset).

- Once this handset is paired and connected, go back and connect the originally paired

handset to the headset. (This will now be your secondary handset).

* NOTE: When the HBM-W600 is connected to two handsets at the same

time(multipoint), the headset calling functions will work with the primary

handset.

Calling function

- Voice Dialing and Last Number Redial features work with the primary handset (or

handset which made the last outgoing call).

Call waiting

- While speaking on an active call, press the call button for 1 second to switch to an

incoming call.

- To switch between 2 active calls, press the call button for 1 second.

- To end both calls briey press the call button.

- If both handsets are receiving an incoming call, the headset will default to the primary

device.

How to Use

10 11

ENG

Audio Streaming (A2DP)

The HBM-W600 supports music streaming (A2DP).

When you play music from yourA2DP enabled device, it will automatically transfer

to your headset. Music will automatically pause when you have an incoming call.

When the call is ended the music will start playing again.

A2DP allows streaming of all audio from your handset and running applications

including music and GPS navigation.

SMS Reader

The HBM-W600 supports SMS reading onAndroid TM based devices.

In Google Play search for the LG “BT Reader” application and install on your device

to use this function.

* The 2D barcode shown below helps you download the LG “BT Reader” application

from Google Play.

HD Voice

The HBM-W600 supports high denition voice calling and audio streaming.

*Network must support HD Voice for higher quality calling.

How to Use

Inhaltsverzeichnis

Sprachen:

Andere LG Headset Handbücher

LG FORCE HBS-S80 Bedienungsanleitung

LG TONE FREE Bedienungsanleitung

LG Tone Infinim HBS900 Bedienungsanleitung

LG BTS1 Bedienungsanleitung

LG TONE Ultra SE Bedienungsanleitung

LG TONE-FP9W Bedienungsanleitung

LG Tone Pro HBS-750 Bedienungsanleitung

LG TONE Free HBS-FN6 Bedienungsanleitung

LG Tone Free TONE-T60Q Bedienungsanleitung

LG TONE Free HBS-FN6 Bedienungsanleitung

LG TONE PLATINUM SE HBS-1120 Bedienungsanleitung

LG TONE FREE Bedienungsanleitung

LG TONE Free HBS-FN6 Bedienungsanleitung

LG HBM-760 Bedienungsanleitung

LG HBM-905 Bedienungsanleitung

LG TONE INFINIM HBS-920 Bedienungsanleitung

LG Tone Active+ HBS-A100 Bedienungsanleitung

LG HBS-750 Bedienungsanleitung

LG FORCE HBS-S80 Bedienungsanleitung

LG TONE ULTRA HBS-820 Bedienungsanleitung

LG HBM-215 Bedienungsanleitung

LG TONE FREE Bedienungsanleitung

LG TONE-FP5 Bedienungsanleitung

LG TONE FREE Bedienungsanleitung

Beliebte Headset Handbücher anderer Marken

Sena

Sena SMH10 Bedienungsanleitung

IASUS

IASUS Stealth IA-NT4-BASIC-BT Bedienungsanleitung

Sennheiser

Sennheiser EPOS ADAPT 230 Bedienungsanleitung

Doro

Doro Flexus HS2005 Bedienungsanleitung

GE 98971 Bedienungsanleitung

Hama

Hama 00184070 Bedienungsanleitung

Plantronics

Plantronics Blackwire 3200 Series Bedienungsanleitung

Blue Tiger

Blue Tiger Advantage PLUS Bedienungsanleitung

Jawbone

Jawbone Icon Bedienungsanleitung

Jabra

Jabra FR 20 Bedienungsanleitung

Roxcore

Roxcore Flow A+ Bedienungsanleitung

Turtle Beach

Turtle Beach XP 510 Bedienungsanleitung

Philips

Philips SHB6101 Bedienungsanleitung

Jabra

Jabra PRO 9460 Duo Bedienungsanleitung

HyperX

HyperX HyperX Cloud Flight Bedienungsanleitung

Bose

Bose MIE2 Mobile Bedienungsanleitung

Jabra

Jabra Steel Bedienungsanleitung

HyperX

HyperX cloud ii Bedienungsanleitung