LG HBS-730 Bedienungsanleitung

Rev 1.0 RU

LG Electronics

BLUETOOTH®Stereo Headset

HBS-730 User Manual

English

Рyccкий

Қазақша

Українська

www.lg.com

English

LG Electronics Inc., 2014

Note: For the best performance and

to prevent any damage to, or misuse of the

HBS-730, please read all of the information

carefully prior to using the HBS-730.

Any modications or changes to this manual due to

typographical errors or inaccuracies of stated information

shall only be made by LG Electronics Inc.

LG Electronics

BLUETOOTH®Stereo Headset

HBS-730 User Manual

ENG

Included in the Package

Earbuds (2 Sets) User Manual

VOLUME UP Button

REW Button

Power Switch

FF Button

PLAY / PAUSE Button

Earphone (R)

Charging Port

VOLUME DOWN Button

CALL Button /

LED Indicator

Earphone (L)

Microphone

Specication

Item Description

Bluetooth® specication 3.0 (Headset / Hands-Free / A2DP Proles)

Battery Battery 3.7V / 195mAh Li-Polymer

Standby time / Talk time Up to 500Hrs / Up to 15Hrs

Music play time Up to 10 Hrs

Charging time < 2.0Hrs

Operation temperature -10°C ~ 60°C

Dimension / Weight 135.6mm(W) X 167.3mm(L) X 16.9mm(T) / 32g

Description of parts

USB Charging Cable WEEE Card

ENG

Pairing

- Before using the headset for the rst time, you must pair it with a Bluetooth-enabled

handset.

- To pair your headset with an additional handset, the headset must be placed in

Pairing Mode.

- There are 2 Pairing Mode Methods with the HBS-730.

Easy Pairing (First Time Pairing)

1. Move the Power switch to the ‘ON’ side to turn on the HBS-730. When the headset

enters Pairing Mode, the LED indicator will show a solid blue light.

2. Using your handset, nd the Bluetooth Menu and “search for” or “add” new

devices.

• Select “LG HBS730” from the list of devices and pair it with your handset.

3. If asked for the Pass/PIN code please enter “0000” (4 Zeros).

* Note : If your handset supports Secure Simple Pairing (SSP), you will not need to

enter Pass/PIN code.

• Once pairing has completed successfully, you will hear “Your headset paired.”.

4. Some handsets might ask for permission to access the phone’s contact list. If you

receive a message from your handset, please select “OK” or “Allow access”

• The HBS-730 will automatically turn off if not paired within 3 minutes.

Manual Pairing (Pairing with another phone or re-pairing)

• With the power off, press the CALL button and move the Power switch to the ‘ON’

side at the same time for 1 second.

• When the headset enters Pairing Mode, the LED indicator will show a solid blue

light. After the procedure repeat Easy Pairing steps 2 through 4.

Multi-connection

Advanced Multipoint

The HBS-730 is capable of having two devices connected to the headset at the same

time. This will give you the freedom of using call waiting between calls on both of your

connected phones.

How to Use

ENG

Connection

- Pair the headset with one of your Bluetooth-enabled handsets. (per the pairing

instructions on page 2).

- Turn off the headset.

- With the power off, press the CALL button and move the Power switch to the ‘ON’

side at the same time for 1 second to enter Manual Pairing mode.

- Now, pair and connect the headset with your other Bluetooth-enabled handset. (this

will be your primary handset).

- Once this handset is paired and connected, go back and connect the originally

paired handset to the headset. This will now be your secondary handset.

* NOTE: When the HBS-730 is connected to two handsets at the same

time(Multipoint), the headset calling functions will work with the primary handset.

* NOTE: In case of failure to connect to the primary phone through Easy Pairing,

HBS-730 will enter pairing mode.

Calling Function

- Voice Dialing and Last Number Redial features work with the primary handset (or

handset which made the last outgoing call).

Call Waiting

- While speaking on an active call, press the CALL button for 1 second to switch to

an incoming call.

- To switch between 2 active calls, press the CALL button for 1 second.

- To terminate the active call or both calls at once, briey press the CALL button.

- If both handsets are receiving an incoming call, the headset will default to the

primary device.

Auto Reconnect

- If the HBS-730 is turned off (either accidentally or intentionally) while connected to

a handset, the headset and handset will disconnect. The headset and handset will

automatically reconnect when the HBS-730 is turned back on while in range.

- Secondary handset need to be connected via selecting “LG HBS730” from the list of

devices at Bluetooth menu.

How to Use

ENG

Controls

Power on / Power off

- Move the Power switch to the ‘ON’ or ‘OFF’ side.

Volume Control

- Briey press the VOLUME button.

Charging

- When the charger is connected, with the power on or off, the headset will turn off.

- While charging, the LED indicator will show a solid red light.

- When charging is complete, the LED indicator will turn off.

Battery status check

- Press and hold the VOLUME DOWN button for 1 second.

- There are 3 levels of battery status

Battery status High Medium Low

Voice Prompt Battery High Battery Medium Battery Low

- HBS-730 battery status indicator will appear on the iPhone screen.

Low battery

- An announcement will be made once every 2 minutes.

- If the battery is not charged, the headset will turn off.

Answering a call / Ending a call

- When there is an incoming call, the headset will ring and vibrate.

- Briey press the VOLUME DOWN button to stop vibration.

- Briey press the CALL button.

Out of range

- If the paired devices are separated by a range of 10 meters(33 feet) or more, the

headset and handset will disconnect and HBS-730 will vibrate to alert.

- If the headset and handset do not automatically reconnect when they are back

within the required range, briey press the CALL button on the HBS-730 to

reconnect manually.

* It is possible to use these functions only when your handset supports them. For

further information about using these features, please consult your handset’s user

manual.

- While in multi-connection and streaming, the inactive paired device, which is out

of range, will be disconnected. The HBS-730 will alert once with no attempt to

reconnect.

How to Use

ENG

Last number redial

- Press and hold the CALL button for 1second to activate “Last Number Redial”.

The headset will beep, and call the last number dialed.

Making a call

- If you make a call from the handset, the call will (subject to phone settings)

automatically transfer to the headset. If the call is not automatically transferred, you

can manually transfer the call by press and hold VOLUME UP button for 3 seconds.

Voice dialing

- Briey press the CALL button to activate “Voice Command”.

Note: If the handset does not support Voice Dialing, it is possible that performing

this action will activate Last Number Redial.

Transferring a call

- While on a call on your handset, press and hold VOLUME UP button for 3 seconds

to transfer the audio either from headset to handset or from handset to headset.

Call waiting

- Answer a second call without hanging up the rst call by pressing the CALL button

for 1 second (you will hear a beep). Press the CALL button for 1second to turn to

the original call.

- Briey press the CALL button to terminate the active call or both calls at once.

(subject to handset’s support)

Call Reject

- Press the CALL button for 1second when the handset rings.

Mic Mute

- Press and hold the VOLUME UP and VOLUME DOWN buttons simultaneously for 1

second to mute/unmute the Mic during conversation.

Audio streaming

- PLAY : Briey press the PLAY/PAUSE button.

- PAUSE : Briey press the PLAY/PAUSE button.

- STOP : Press and hold the PLAY/PAUSE button.

- NEXT SONG : Briey press the FF button.

- PREVIOUS SONG : Briey press the REW button.

- FAST FORWARD : Press and hold the FF button.

- REWIND : Press and hold the REW button.

How to Use

ENG

Equalizer

- While playing music, press and hold VOLUME UP and VOLUME DOWN buttons

simultaneously for 1 second to switch between EQ’s (Bass Boost(Default) g

Normal g Treble Boost).

- EQ is not changed if your handset supports aptX®codec and is enabled.

- The bass coming from the speakers can vary as a result of the size of the Earbud

that is being used.

SMS Reader

The HBS-730 Bluetooth headset supports SMS reading on

Android TM based devices.

In Google Play™ Store search for the LG ‘BT Reader’

application and install on your device to use this function.

* The 2D barcode shown below helps you download the LG

‘BT Reader’ application from Google Play™ Store. Google

Play is a trademark of Google, Inc.

aptX®

- HBS-730 features aptX® technology that ensures audio content transmitted over

Bluetooth is instant and crystal-clear.

- aptX® is automatically enabled as long as the source device supports it.

How to Use

ENG

LED indication

Issue Possible problem Resolution

Does not turn on

Check whether the battery

of the HBS-730 is fully

charged.

Charge the battery.

Unable to

communicate with

the LG Bluetooth®

Headset HBS-730

Check whether the

handset supports the

headset or hands-free

Bluetooth proles.

Determine whether your

handset supports the headset

or hands-free Bluetooth

proles.

Check whether the battery

of the HBS-730 is low.

Charge the battery.

Unable to pair the

HBS-730 with the

Bluetooth®device

Check and make sure the

headset is on.

Slide the Power switch to

the ‘ON’ side to turn on the

headset.

Check and make sure

the headset is placed in

pairing mode.

With the power off, press the

CALL button and move the

Power switch to the ‘ON’ side

at the same time for 1 second

to manually place the headset

in pairing mode.

Low sound

(speaker) Check the speaker

volume. lncrease the volume level.

Function HBS-730 Status Action

Operating

Power on The blue LED light ickers 4 times.

Power off

The blue LED light ickers 4 times and then

turns off.

Pairing mode The blue LED light stays on.

Headset / hands-free

prole connected

The blue LED light ickers 2 times every 5

seconds.

Call connected The blue LED light ickers 2 times every 5

seconds.

Charging Charging The red LED stays on.

Charging complete

LED turns off.

Troubleshooting

Andere Handbücher für HBS-730

Inhaltsverzeichnis

Sprachen:

Andere LG Headset Handbücher

LG TONE-T90Q.AUSACBK Bedienungsanleitung

LG TONE Active HBS-A80 Bedienungsanleitung

LG TONE Free TONE-DFP8 Bedienungsanleitung

LG HBS-600 Bedienungsanleitung

LG Tone Pro HBS-750 Bedienungsanleitung

LG HBM-230 Bedienungsanleitung

LG TONE Style HBS-SL5 Bedienungsanleitung

LG Tone Active+ HBS-A100 Bedienungsanleitung

LG HBS-XL7 Bedienungsanleitung

LG TONE ACTIVE PLUS HBS-A100 Bedienungsanleitung

LG TONE Free fit TONE-TF8Q Bedienungsanleitung

LG HBM-W600 Bedienungsanleitung

LG TONE Free TONE-T90Q Bedienungsanleitung

LG TONE Free T90 Bedienungsanleitung

LG HBS-110 Bedienungsanleitung

LG TONE PLATINUM SE Bedienungsanleitung

LG HBM-760 Bedienungsanleitung

LG TONE-FP5W Bedienungsanleitung

LG HBS-730 Bedienungsanleitung

LG TONE-FP5 Bedienungsanleitung

LG TONE-FP9 Bedienungsanleitung

LG TONE-FP6 Bedienungsanleitung

LG Tone Free TONE-T60Q Bedienungsanleitung

Beliebte Headset Handbücher anderer Marken

Sena

Sena SMH10 Bedienungsanleitung

IASUS

IASUS Stealth IA-NT4-BASIC-BT Bedienungsanleitung

Sennheiser

Sennheiser EPOS ADAPT 230 Bedienungsanleitung

GE 98971 Bedienungsanleitung

Hama

Hama 00184070 Bedienungsanleitung

Plantronics

Plantronics Blackwire 3200 Series Bedienungsanleitung

Blue Tiger

Blue Tiger Advantage PLUS Bedienungsanleitung

Jawbone

Jawbone Icon Bedienungsanleitung

Jabra

Jabra FR 20 Bedienungsanleitung

Roxcore

Roxcore Flow A+ Bedienungsanleitung

Turtle Beach

Turtle Beach XP 510 Bedienungsanleitung

Philips

Philips SHB6101 Bedienungsanleitung

Jabra

Jabra PRO 9460 Duo Bedienungsanleitung

HyperX

HyperX HyperX Cloud Flight Bedienungsanleitung

Bose

Bose MIE2 Mobile Bedienungsanleitung

Jabra

Jabra Steel Bedienungsanleitung

HyperX

HyperX cloud ii Bedienungsanleitung

Southwing

Southwing SA505 Bedienungsanleitung