LG TONE-FP9 Bedienungsanleitung
REFERENCE GUIDE
Bluetooth®LG Stereo Headset
Google Play App Store
Rev 1.0 RU
www.lg.com
TONE-FP9 / TONE-FP9W /
TONE-FP9E
English
LG Electronics Inc. Single point of contact (EU/UK) :
Krijgsman 1, 1186 DM Amstelveen, The Netherlands
ENGLISH
NOTE: For the best performance and to prevent any
damage to, or misuse of the headset, please read all of the
information carefully prior to using the headset.
Any modications or changes to this manual due to
typographical errors or inaccuracies of stated information
shall only be made by LG Electronics Inc.
TONE-FP9 / TONE-FP9W /
TONE-FP9E www.lg.com
Copyright © 2021 LG Electronics Inc. All Rights Reserved
REFERENCE GUIDE
Bluetooth®LG Stereo Headset
1
ENGLISH
The LG TONE Free (TONE-FP9) is a lightweight wireless headset that uses
Bluetooth technology.
This product can be used as an audio accessory for devices supporting
either the A2DP or Hands-Free Bluetooth Prole.
Safety Precautions
The following safety precautions are provided to prevent any unexpected
accident or damage. Please familiarise yourself with the safety precautions.
The safety precautions are classied into “WARNING” and “CAUTION”.
!
WARNING: Failing to comply with the instructions may result in
serious injury or death.
!
CAUTION: Failing to comply with the instructions may result in minor
injury or product damage.
!WARNING
Do not drop the product from a high place.
Make sure there is no water, alcohol, or benzene in contact with the
product.
Do not store the product in a wet or dusty place.
Do not place heavy objects on the product.
This product is waterproof to the IPX4 level (daily life waterproof).
(The IPX4 waterproof rating applies to the earbud product only.)
Do not put the product under the water or use it in a humid location
such as a bathroom.
2
ENGLISH
!CAUTION
Do not disassemble, adjust, or repair the product arbitrarily.
Do not place the product near excessive heat or ammable material.
The product may be damaged if an incompatible charger is used.
Make sure that an infant or child does not swallow a magnet or a small
component of the product.
Make sure that foreign objects do not enter the charger’s connectors
(charging port and power plug). Failure to do so may result in re or
electric shock.
If you have a medical device implanted, contact your doctor before
using this device.
This product has a built-in battery, and the battery cannot be removed
or replaced arbitrarily.
For your safety, do not remove the battery incorporated in the product.
If you arbitrarily replace the battery or don’t replace it correctly, it may
explode.
The lithium-ion battery is a hazardous component that can cause injury.
Battery replacement by an unqualied professional can cause damage
to your device.
Do not replace the battery by yourself. The battery can be damaged,
which can cause overheat and injury. The battery must be replaced by
authorised service provider. The battery should be recycled or disposed
separately from household wastes.
Do not discard the battery arbitrarily. Follow the local procedure for
discarding batteries.
3
ENGLISH
Risk of re or explosion if the battery is replaced by an incorrect type.
Do not store or transport at pressures lower than 11.6 kPa and at
above 15000 m altitude.
Replacement of a battery with an incorrect type that can defeat a
safeguard (for example, in the case of some lithium battery types).
Disposal of a battery into re or a hot oven, or mechanically crushing or
cutting of a battery, that can result in an explosion.
Leaving a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of ammable
liquid or gas.
A battery subjected to extremely low air pressure that may result in an
explosion or the leakage of ammable liquid or gas.
Do not carelessly throw away old batteries. It can cause an explosion or
re. The disposal method may vary by country and region. Dispose of it
in an appropriate manner.
NOTE
If the product is exposed to excessive sweat, clean the product.
Keep the earbuds clean.
Wearing earbuds for a long time may cause pain, and if humidity inside
ears continues for a long time, it may cause skin trouble.
Make sure authentic LG Electronics components are used. Using a
non-authentic component may damage the product and thus void the
warranty.
Actual product design may differ from images shown in manual.
4
ENGLISH
Make sure that the charging terminal is not soiled with foreign
substance.
The appearance and specications of the actual product may differ
depending on the model.
HD Speaker
If the communication network of the device you are connecting to supports
HD Voice Calling, you can enjoy making voice calls and listening to music in
high denition.
Fast Pair
1 Turn on the Bluetooth function on the mobile phone or the device to
be connected.
2 Open the cover of the charging case with the earbuds mounted on the
case. Press and hold the touchpad of the left or right earbud for 3 to 5
seconds until the battery status indicator blinks in blue.
3 When the Fast Pair connection pop-up appears on the top area of the
mobile phone screen, tap it to connect. (It only supports Android™ 6.0
or higher, and requires conguring Bluetooth and location information
settings of the mobile device.)
4 If the pop-up does not appear, select [LG-TONE-FP9] from the
Bluetooth menu on the mobile phone and connect it (for users of iOS
or Android 5.0 or lower versions).
5
ENGLISH
!
CAUTION: In the list of Bluetooth connected devices,
LG-TONE-FP9_LE is not the correct model name for connection.
Check the model name in use and connect with the model name
without “LE”.
If the earbud model name is abnormally displayed on the Android
device, change the model name in the Bluetooth menu of
Connected Device Settings.
NOTE: To connect with another device, perform the above procedure again.
Listen to the Ambient Sound (LAS) / Active Noise Cancellation (ANC)
L
isten to the Ambient Sound (LAS) Active Noise Cancellation (ANC)
The Listen to the Ambient Sound
(LAS) function allows you to listen to
the ambient sound so that you can
recognize the surrounding situation
and any potential risks.
The Active Noise Cancellation
(ANC) function blocks any
ambient sound. So, you can use
the function to listen to the
music or watch a video without
interference.
Touch and hold the left or right earbud to switch between the ANC mode
and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
You can congure the Listen to the Ambient Sound mode and
Conversation mode using the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing
the time you can use the product.
6
ENGLISH
You can use the LAS and ANC functions while being idle, listening to
music, or being on the phone.
*ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient
sound become loud suddenly.
When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
UVnano
The charging case has a built-in UVnano LED, which allows you to use your
earbuds cleanly.
If you charge the earbuds wired after mounting them on the charging case
and closing the cover, the UVnano LED operates for 5 minutes.
*UVnano is a compound word derived from the words UV and its unit,
nanometer.
NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano charging case eliminates up to 99.9% of harmful bacteria
inside the earbud hole.
In the case of a white product, discolouring may occur in the contact
area of the UVnano LED, but it does not affect the product function.
!
CAUTION: Be aware that the temperature of the earbuds may rise
while the UVnano LED is on.
7
ENGLISH
Plug and Wireless Mode (External Device Connection Mode)
You can connect the charging case to a device such as an airplane stereo
system, treadmill, cassette player, radio, and TV to listen with the earbuds.
1 Push the Plug and Wireless Mode switch on the charging case to
the right to activate the Plug and Wireless Mode. The battery status
indicator ashes in green.
2 Open the cover of the charging case to connect the charging case to
the earbuds. Once the connection is established, the battery status
indicator turns on in green for 3 seconds and turns off.
3 Connect the USB Type C™ side of the USB-C™to AUX cable to the charging
case. (The USB-C™to AUX cable does not support the charging function.)
4 Connect the AUX side of the USB-C™ to AUX cable to a device that
you want.
NOTE: Deactivate the Plug and Wireless Mode to reconnect the
earbuds to the Bluetooth device that was previously connected.
If the Plug and Wireless Mode is turned on, the earbuds and the
LG TONE Free app are disconnected.
The Plug and Wireless mode does not support the call function.
The Plug and Wireless mode may not be compatible with some
devices. In airplane models in which the AUX terminal is divided into
left and right channels, an adapter (separately sold) may be necessary.
If you use the Plug and Wireless mode for a long duration, the
battery of the earbuds (including the charging case) may drain
faster than when physically connected to a smartphone.
Andere Handbücher für TONE-FP9
6
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Sprachen:
Andere LG Headset Handbücher
LG
LG ToneFree Bedienungsanleitung
LG
LG TONE-FP9 Bedienungsanleitung
LG
LG HBS-600 Bedienungsanleitung
LG
LG TONE TRIUMPH HBS-510 Bedienungsanleitung
LG
LG TONE-FP3W Bedienungsanleitung
LG
LG TONE PRO HBS-781 Bedienungsanleitung
LG
LG TONE Free HBS-FN6 Bedienungsanleitung
LG
LG TONE-FP5 Bedienungsanleitung
LG
LG HBS-XL7 Bedienungsanleitung
LG
LG HBM-290 Bedienungsanleitung
LG
LG TONE Ultra SE Bedienungsanleitung
LG
LG HBM-210 Bedienungsanleitung
LG
LG LG TONE PRO HBS-780 Bedienungsanleitung
LG
LG HBS-800 Bedienungsanleitung
LG
LG HBM-905 Bedienungsanleitung
LG
LG HBS1125BLACK Bedienungsanleitung
LG
LG TONE Free HBS-FN6 Bedienungsanleitung
LG
LG HBM-220 Bedienungsanleitung
LG
LG FORCE HBS-S80 Bedienungsanleitung
LG
LG TONE-FP9 Bedienungsanleitung
