LG Tone Infinim HBS900 Bedienungsanleitung
English
繁體中文
简体中文
Rev 1.0 TW
All rights reserved.
LG Electronics Inc., 2014
Note: For the best performance and
to prevent any damage to, or misuse of the
HBS-900, please read all of the information
carefully prior to using the HBS-900.
Any modications or changes to this manual due to
typographical errors or inaccuracies of stated information
shall only be made by LG Electronics Inc.
HBS-900 User Manual
Bluetooth®Stereo Headset
ON
OFF
h
a
r
m
a
n
/
k
a
r
d
o
n
2
ENG
Description of parts
Ear Gels (2 Sets) User Manual
USB Charging Cable
Item Description
Bluetooth
®
specication
3.0 (Headset / Hands-Free / A2DP Proles)
Battery
Battery 3.7 V / 220 mAh Li-Polymer
Standby time / Talk Time Up to 550 hours / Up to 17 hours
Music play time Up to 14 hours
Charging time Less than 2 hours
Charging rated input DC 4.75 V ~ 5.6 V, 400 mA
Operation temperature -10°C ~ 60°C
Dimension / weight 155 mm (W) x 178 mm (L) x 15 mm (H)/54 g
Package Contents
Specications
ON
OFF
h
a
r
m
a
n
/
k
a
r
d
o
n
FF/REW Switch
Charging Port
Microphone
Earbud (L)
LED Indicator CALL Button
Earbud Wire
Retraction Button
PLAY/PAUSE/STOP
Button
Earbud (R)
ON
OFF
h
a
r
m
a
n
/
k
a
r
d
o
n
Power Switch
Earbud Wire
Retraction Button
VOLUME Switch (+/-)
3
ENG
Power On / Power Off
- Slide the Power switch to the ON or OFF position.
Charging
- When the charger is connected (with the power on or off) the headset will turn off.
- While charging, the LED indicator will show a solid red light and then change to
violet when charged 80% and above.
- When charging is completed, the LED indicator will show a solid blue light.
Low Battery
- An announcement will be made once every 2 minutes.
- If the battery is not charged, the headset will turn off.
Battery Status Alert
- Slide the VOLUME switch to the - position for 1 second.
- There are 3 levels of battery power.
Battery Status High Medium Low
Voice Prompt Battery High Battery Medium Battery Low
LED Indicator
Blinking
Blue
3 times
Blinking
Violet
3 times
Blinking
Red
3 times
- The HBS-900 battery status indicator will appear on the G3 and iPhone screen.
Retractable Earbud Wire
- By pulling the left or right earbuds, the earbud wires can be extended.
- Pressing the Earbud Wire Retraction button winds the earbud wire automatically.
How to Use
4
ENG
How to Use
Pairing
- Before using the headset for the rst time, you must pair it with a Bluetooth-enabled
handset.
- To pair your headset with an additional handset, the headset must be placed in
Pairing Mode.
- There are 2 Pairing Mode Methods with the HBS-900.
Easy Pairing (First Time Pairing)
1. Slide the Power switch to the ON position to turn on the HBS-900. When the
headset enters Pairing Mode, the LED indicator will show a solid blue light.
2. Using your handset, nd the Bluetooth Menu and search for or add new devices.
• Select LG HBS900 from the list of devices and pair it with your handset.
3. If asked for the Pass/PIN code please enter 0000 (4 Zeros).
* Note : If your handset supports Secure Simple Pairing (SSP), you will not need to
enter Pass/PIN code.
• Once pairing has completed successfully, you will hear “Your headset paired.”
• The HBS-900 will automatically turn off if not paired within 3 minutes.
Manual Pairing (Pairing with another phone or re-pairing)
• With the power off, press the CALL button and slide the Power switch to the ON
position at the same time for 2 seconds.
• When the headset enters Pairing Mode, the LED indicator will show a solid blue
light. After the procedure repeat Easy Pairing steps 2 through 3.
5
ENG
Advanced Multipoint
The HBS-900 is capable of having two devices connected to the headset at the
same time. This will give you the freedom of using call waiting between calls on
both of your connected phones.
Connection
- Pair the headset with one of your Bluetooth-enabled handsets (see the pairing
instructions on page 2).
- Turn off the headset.
- With the power off, press the CALL button and slide the Power switch to the ON
position at the same time for 2 seconds to enter Manual Pairing mode.
- Pair and connect the headset with your other Bluetooth-enabled handset. (this
will be your primary handset).
- Once this handset is paired and connected, go back and connect the originally
paired handset to the headset. This will now be your secondary handset.
* NOTE: When the HBS-900 is connected to two handsets at the same time
(Multipoint), the headset calling functions will work with the primary handset.
* NOTE: In case of failure to connect to the primary phone through Easy Pairing,
HBS-900 will enter pairing mode.
Calling Function
- Voice Dialing and Last Number Redial features work with the primary handset (or
handset which made the last outgoing call).
Call Waiting
- While speaking on an active call, press the CALL button for 1 second to switch
to an incoming call.
- To switch between 2 active calls, press the CALL button for 1 second.
- To terminate the active call or both calls at once, briey press the CALL button.
- If both handsets are receiving an incoming call, the headset will default to the
primary device.
Multi-connection
How to Use
6
ENG
- If the HBS-900 is turned off (either accidentally or intentionally) while connected
to a handset, the headset and handset will disconnect. The headset and handset
will automatically reconnect when the HBS-900 is turned back on while in range.
- The secondary handset need to be connected via selecting LG HBS900 from the
list of devices at Bluetooth menu.
Out of range
- If the paired devices are separated by a range of 10 meters(33 feet) or more, the
headset and handset will disconnect and HBS-900 will vibrate to alert.
* If vibrate is set to off by sliding the VOLUME switch to the + position and hold for
2 seconds, HBS-900 will not vibrate.
- If the headset and handset do not automatically reconnect when they are back
within the required range, briey press the CALL button on the HBS-900 to
reconnect manually.
* It is possible to use these functions only when your handset supports them. For
further information about using these features, please consult your handset’s
user manual.
- While in multi-connection and streaming, the inactive paired device, which is
out of range, will be disconnected. The HBS-900 will alert once with no attempt
to reconnect.
How to Use
Auto Reconnect
Answering a call / Ending a call
- When there is an incoming call, the headset will ring and vibrate.
* HBS-900 will not vibrate if vibration function is on ‘off’.
- Briey slide the VOLUME switch to the - position to stop the vibration.
- Briey press the CALL button.
Transferring a call
- While on a call on your handset, press the PLAY/PAUSE/STOP button twice
on the HBS-900 to transfer the audio either from headset to handset or from
handset to headset.
Calling
7
ENG
Voice dialing
- Briey press the CALL button to activate Voice Command.
Note: If the handset does not support Voice Dialing, it is possible that performing
this action will activate Last Number Redial.
Last number redial
- Press and hold the CALL button for 1second to activate Last Number Redial.
The headset will beep, and call the last number dialed.
Call waiting
- Answer a second call without hanging up the rst call by pressing the CALL
button for 1 second (you will hear a beep). Press the CALL button for 1second to
turn to the original call.
- Briey press the CALL button to terminate the active call or both calls at once.
(subject to handset’s support)
Rejecting a Call
- Press the CALL button for 2 seconds when the handset rings.
Mic Mute
- Slide the VOLUME switch to the + position and the FF/REW switch to the
REW position at the same time for 1 second to mute/unmute the Mic during
conversation.
* Precaution : For your safety, do not operate microphone mute during driving.
- Slide the VOLUME switch to the + or - position.
Volume control
Audio streaming controls
- PLAY : Briey press the PLAY/PAUSE button.
- PAUSE : Briey press the PLAY/PAUSE button.
- STOP : Press and hold the PLAY/PAUSE button.
- NEXT SONG : Briey slide the FF/REW switch to the FF position.
- PREVIOUS SONG : Briey slide the FF/REW switch to the REW position.
- FAST FORWARD : Slide and hold the FF/REW switch to the FF position.
- REWIND : Slide and hold the FF/REW switch to the REW position.
How to Use
8
ENG
Equalizer
- While playing music, press the PLAY/PAUSE/STOP button twice to switch between
Bass Boost (default), Normal, and Treble Boost.
- The bass coming from the speakers can vary as a result of the size of the ear gel
that is being used.
aptX®
- The HBS-900 features aptX®technology that ensures audio content transmitted via
Bluetooth is instant and crystal-clear.
- aptX®is automatically enabled as long as the source device supports it.
How to Use
Vibrate Control
- To activate or deactivate the Vibrate function, slide the VOLUME switch to the +
position for 2 seconds. You will hear “Vibrate on” or “Vibrate off” when it is activated
or deactivated.
- When the HBS-900 is set to vibrate off, the headset will not vibrate when receiving an
incoming call or when it is out of range.
- By powering the unit off and then powering the unit back on, the vibration functionality
will be activated.
9
ENG
SMS Reader
The HBS-900 Bluetooth headset supports SMS reading on
AndroidTM based devices.
In Google Play™ search for the LG Tone & TalkTM application
and install it on your device to use this function.
* The QR code shown here helps you download the LG Tone
& TalkTM application from Google Play. Google Play is a
trademark of Google, Inc.
Function Action
Current time alert Slide the FF/REW switch to the FF position for 1 second.
Read latest SMS or MMS Slide the FF/REW switch to the REW position for 1 second.
Direct dial Press the CALL button twice (select Direct dial and set the
telephone number from Speed Dial menu of Tone & Talk
TM
).
Favorite call
1. Press the CALL button twice.
2. Select the name to call by sliding the FF/REW switch
for 1 second.
3. Press the CALL button twice to call (select Favorite call
and set telephone number from the Speed Dial menu of
Tone & Talk
TM
).
Dial using Call History
1. Press the CALL button twice.
2. Select the name to call by sliding the FF/REW switch
for 1 second.
3. Press the CALL button twice to call (select Call history
and set the telephone number from the Speed Dial menu
of Tone & Talk
TM
).
Tone & TalkTM
How to Use
10
ENG
LED Indicator
Issue Possible problem Resolution
Does not
turn on
Check whether the battery of
the HBS-900 is fully charged. Charge the battery.
Unable to
communicate
with the LG
Bluetooth®
Headset
HBS-900
Check whether the handset
supports the headset or
hands-free Bluetooth proles.
Determine whether your
handset supports the headset
or hands-free Bluetooth proles.
Check whether the battery of
the HBS-900 is low.
Charge the battery.
Unable to pair
the HBS-900
with the
Bluetooth®
device
Check and make sure the
headset is on.
Slide the Power switch to the
ON position to turn on the
headset.
Check and make sure the
headset is placed in pairing
mode.
With the power off, press the
CALL button and slide the
Power switch to the ON position
at the same time for 1 second
to place the headset in Manual
Pairing mode.
Low sound
(speaker) Check the speaker volume. lncrease the volume level.
Function HBS-900 Status Action
Operating
Power on The blue LED light ickers 4 times.
Power off
The blue LED light ickers 4 times and then
turns off.
Pairing mode The blue LED light stays on.
Headset / hands-free
prole connected
The blue LED light ickers 1 time every 5
seconds.
Call connected The blue LED light ickers 1 time every 5
seconds.
Charging Charging The red LED light stays on and changes to
violet when charged 80% and above.
Charging complete
The blue LED light stays on.
Troubleshooting
Andere Handbücher für Tone Infinim HBS900
7
Inhaltsverzeichnis
Andere LG Headset Handbücher
LG
LG BLUETOOTH HBS-250 Bedienungsanleitung
LG
LG HBM-710 Bedienungsanleitung
LG
LG TONE INFINIM HBS-920 Bedienungsanleitung
LG
LG TONE ULTRA HBS-810 Bedienungsanleitung
LG
LG TONE-FP8 Bedienungsanleitung
LG
LG FORCE HBS-S80 Bedienungsanleitung
LG
LG Tone Free HBS-FN7 Bedienungsanleitung
LG
LG TONE ULTRA HBS-810 Bedienungsanleitung
LG
LG TONE INFINIM HBS-910 Bedienungsanleitung
LG
LG Tone Ultra HBS-820S Bedienungsanleitung
LG
LG TONE-FP8W Bedienungsanleitung
LG
LG TONE Free TONE-T90Q Bedienungsanleitung
LG
LG Tone Free TONE-T60Q Bedienungsanleitung
LG
LG HBM-750 Bedienungsanleitung
LG
LG HBM-550 Bedienungsanleitung
LG
LG TONE-FN7UV Bedienungsanleitung
LG
LG TONE INFINIM HBS-912 Bedienungsanleitung
LG
LG Tone Active+ HBS-A100 Bedienungsanleitung
LG
LG HBM-585 Bedienungsanleitung
LG
LG HBM-235 Bedienungsanleitung
