LG 27LZ50C Bedienungsanleitung

LCD

Colour Television

OWNER’S MANUAL

Please read this manual carefully before operating your set.

Retain it for future reference.

Record model number and serial number of the set.

See the label attached on the back cover and quote this infor-

mation to your dealer when you require service.

Model number :

Serial number :

BZ03

Contents

Installation 3

Location and function of controls 4

Remote control handset

Battery installation / Top of panel

Basic operation 7

On and off / Programme selection

Volume adjustment / Quick view

Mute function / Auto Demonstration

TV Swivel function

On screen language selection (option)

On screen menus 8

Menu selection

Setting up TV stations 9

Auto programme tuning

Manual programme tuning

Fine Tuning / Programme edit

Favourite programme

Calling the programme table

Picture adjustment 14

PSM (Picture Status Memory)

Picture adjustment / DRP (Digital Reality Picture)

CSM (Colour Status Memory) / Picture format

Sound adjustment 16

SSM (Sound Status Memory)

Sound adjustment / Stereo/Dual reception

NICAM reception (option) / Sound output selection

Other functions 18

TV, AV and PC modes

Auto AV switching / Child lock

Auto sleep / Sleep timer

PIP operation (option) 20

On and off / Input mode selection for sub picture

Swapping between main and sub picture

Programme selection for sub picture

Sub picture size / Sub picture freeze

Sub picture position change / Programme scan

Teletext (option) 22

Switch on/off

SIMPLE text / TOP text (option)

FASTEXT / Special teletext functions

Connection of external equipment 25

Aerial socket

Euro scart socket

Audio/Video in sockets

S-Video/Audio in sockets (S-Video) (option)

Headphone socket

Connection of PC 27

PC in socket (D-Sub jack)

Menu selection / PC Setup

Troubleshooting check list 30

Installation

Power

This set operates on a DC supply provided by the AC-DC adaptor,

the voltage is as indicated on the label on the back cover. Use only

the AC-DC adaptor supplied with the set and never apply an AC

mains to the set directly. The AC-DC adaptor operates on an AC

mains supply, the voltage is as indicated on the label of the AC-DC

adaptor.

a. Open the back panel cover.

b. Connect the DC plug of the AC-DC adaptor to the 15V socket of

the set.

c. Connect the AC-DC adaptor and it’s power cord.

d. Connect the power cord to an AC mains.

e. Close the back panel cover.

In the event of thunderstorms or powercuts, please pull out the

mains plug of the AC-DC adaptor and the aerial plug. Do not allow

anything to rest upon or roll over the power cord, and do not place

the monitor where the power cord is subject to damage.

Warning

To prevent fire or shock hazard, do not expose the set to rain or

moisture. Do not rub or strike the Active Matrix LCD with anything

hard as this may scratch, mar, or damage the Active Matrix LCD

permanently.

The working life of this set is 7 years since the date of delivery to

consumer.

Service

Never remove the back cover of the set as this can expose you to

high voltage and other hazards. If the set does not operate proper-

ly, unplug it and call your dealer.

Aerial

Connect the aerial cable to the socket marked +75 Ωon the back.

For the best reception an outdoor aerial should be used.

Location

Position your set so that no bright light or sunlight falls directly onto

the screen. Care should be taken not to expose the set to any

unnecessary vibration, moisture, dust or heat. Also ensure that the

set is placed in a position to allow a free flow of air. Do not cover

the ventilation openings on the back cover.

This standing angle can be adjusted as shown in pictures.

When you install the set to use the wall mounting bracket (optional

parts), fix it carefully so as not to drop.

Cleaning

Unplug the set before cleaning the face of the LCD Screen. Dust

the set by wiping the screen and the cabinet with a soft, clean cloth.

If the screen requires additional cleaning, use a clean, damp cloth.

Do not use liquid cleaners or aerosol cleaners.

Manufactured under license from Dolby Laboratories. “Dolby”

and the double-D symbol are trademarks of Dolby

Laboratories.

POWERMUTE

TV/AV TV/PC I/II

LIST

VOL OK

123

456

789

SSM PSM

VOL

EXIT MENU

ARC PIP TEXT

POSITION

PIP INPUT

TIME

SIZE

PIP SWAP

MIX

STILL

PIP PR+

PIP PR

REVEAL

SCAN SLEEP

Location and function of controls

All the functions can be controlled with the remote control handset.

Some functions can also be adjusted with the buttons on the top

panel of the set. Only the remote control handset supplied will oper-

ate this set.

Remote control handset

Before you use the remote control handset, please install the bat-

teries. See the next page.

1. MUTE

switches the sound on or off.

2. TV/AV

selects TV or AV monitor mode.

clears the menu from the screen.

switches the set on from standby.

3. LIST

displays the programme table.

4. EXIT

exits from each mode.

5. DD / EE(Programme Up/Down)

selects a programme or a menu item.

switches the set on from standby.

FF / GG (Volume Up/Down)

adjusts the volume.

adjusts menu settings.

accepts your selection or displays the current mode.

6. NUMBER BUTTONS

switches the set on from standby and selects a programme.

7. SSM (Sound Status Memory)

recalls your preferred sound setting.

8. PIP BUTTONS (option)

PIP

switches the sub picture on or off.

PIP PR +/-

selects a programme for the sub picture.

PIP SWAP

alternates between main and sub picture.

PIP INPUT

selects the input mode for the sub picture.

SIZE

adjusts the sub picture size.

STILL

freezes motion of the sub picture.

POSITION

relocates the sub picture in up/down or left/right direction.

SCAN

switches on the programme scan mode through 3/12 sub pictures

and 9 main pictures.

9. ARC

select your desired picture format.

111

Location and function of controls

10. TV/PC

selects TV or PC monitor mode.

clears the menu from the screen.

switches the set on from standby.

11. POWER

switches the set on from standby or off to standby.

12. I/II

selects the language during dual language broadcast.

selects the sound output (option).

13. MENU

selects a menu.

14. PSM (Picture Status Memory)

recalls your preferred picture setting.

15. TELETEXT BUTTONS (option)

These buttons are used for teletext.

For further details, see the ‘Teletext’section.

16. PIP SWAP

returns to the previously viewed programme.

selects a favourite programme.

17. SLEEP

sets the sleep timer.

Note : If you turn on the TXT in PIP, some PIP keys, such as POSI-

TION, PIP INPUT or PIP PR +/- etc. will work as TXT keys.

Battery installation

Note : To avoid damage from possible battery leakage, remove the

batteries if you do not plan to use the remote control handset for an

extended period of time.

POWERMUTE

TV/AV TV/PC I/II

LIST

VOL OK

123

456

789

SSM PSM

VOL

EXIT MENU

ARC PIP TEXT

POSITION

PIP INPUT

TIME

SIZE

PIP SWAP

MIX

STILL

PIP PR+

PIP PR

REVEAL

SCAN SLEEP

111

The remote control handset is pow-

ered by two AAA/Alkaline type bat-

teries. To load the batteries, turn

the remote control handset over

and open the battery compartment.

Install two batteries as indicated by

the polarity symbols ( and )

marked inside the compartment.

1. ON/OFF

switches the set on from standby or off to

standby.

2. TV/AV/PC

selects TV, AV or PC monitor mode.

clears the menu from the screen.

switches the set on from standby.

3. MENU

selects a menu.

4. OK

accepts your selection or displays the current

mode.

5. FF / GG (Volume Up/Down)

adjusts the volume.

adjusts menu settings.

6. DD / EE(Programme Up/Down)

selects a programme or a menu item.

switches the set on from standby.

7. REMOTE CONTROL SENSOR

8. LED (Light Emitting Diode) DISPLAY

illuminates brightly when the set is switched on.

: POWER/STANDBY indicator

: MONO indicator

: STEREO indicator

: DUAL indicator

: DPM indicator

9. HEADPHONE SOCKET

Connect the headphone plug to this socket.

10. AUDIO/VIDEO IN SOCKETS (AV3)

Connect the audio/video out sockets of exter-

nal equipment to these sockets.

S-VIDEO/AUDIO IN SOCKETS (S-VIDEO)

Connect the video out socket of an S-VIDEO

VCR to the S-VIDEO socket.

Connects the audio out sockets of the S-

VIDEO VCR to the audio sockets as in AV3.

Location and function of controls

Top of panel

ON/OFF TV/AV/PC MENU OK VOL PR

MONO DPM

STEREO

DUAL

S-VIDEO VIDEO

L / MONO AUDIO

AV3

1 2 3 4 5 6

MONO

STEREO

DUAL

DPM

(

Side panel

)

Basic operation

On and off

1. Press the POWER, DD / EE, TV/AV, TV/PC or NUMBER buttons

to switch it on fully.

2. Press the POWER button. The set reverts to standby mode.

3. Pull out mains plugs to switch the set off.

Note : If, while the set is switched on, the mains plug is discon-

nected the set will switch to standby or power on when the mains

plug is replaced in the mains power socket.

Programme selection

You can select a programme number with the DD / EEor NUMBER

buttons.

Volume adjustment

Press the FF / GG button to adjust the volume.

Quick view

Press the PIP SWAP button to view the last programme you were

watching.

Note : This function works only when Favourite programme is set

to Off. Otherwise each press of this button will select a stored

favorite programme.

Mute function

Press the MUTE button. The sound is switched off and the display

appears.

You can cancel it by pressing the MUTE, FF / GG, I/II,orSSM button.

Auto Demonstration

To review all the menus programmed in the set, press the OK but-

ton on the top panel controls for about 10 seconds. To stop auto

demonstration, press any button on the top panel controls and the

POWER button of the remote control.

TV Swivel function

You can manually turn TV set at left or right direction by 30 degrees,

so that the watching degree is suitable for your position.

On screen language selection (option)

The menu can be displayed on the screen in your desired lan-

guage. First select your language.

1. Press the MENU button and then DD / EE button to select the

Special menu.

2. Press the OK or GGbutton and then DD / EE button to select

Language.

3. Press the FF /GGbutton to select your desired language.

All the on screen displays will appear in the selected language.

Press the OK button.

4. Press the EXIT button to return to normal TV viewing.

POWERMUTE

TV/AV TV/PC I/II

VOL OK

123

456

789

SSM

VOL

EXIT MENU

PIP SWAP

Menu selection

1. Press the MENU button and then DD / EE button to display each menu.

2. Press the OK or GGbutton and then DD / EE button to select a

menu item.

3. Change the setting of an item in the sub or pull-down menu with

FF / GGbutton.

You can move to the higher level menu by pressing the OK but-

ton and to move to the lower level menu by pressing the MENU

button.

Note :

a. In the PC mode, the Station menu is not displayed.

b. In the TV/AV mode, the RGB-PC menu is not displayed.

c. In the teletext mode, menus are not displayed.

d. On some models, the Language will not be displayed.

On screen menus

VOL OK

123

456

789

SSM

VOL

TV programme

Auto programme

Manual programme

Programme edit

Favourite programme

Station

System BG

Storage from 0

Start

Storage 4

System BG

Channel V/UHF 5

Fine

GGG

Name C O 5

0 C 03 5 S 69

1 BLN 03 6 S 17

2 C 12 7 S 22

3 S 66 8 C 09

4 S 67 9 C 11

Off

1. -- -----

2. -- -----

3. -- -----

4. -- -----

5. -- -----

Delete Copy

Move Skip

Station menu

PSM Dynamic

DRP On

CSM Cool

Picture

Picture menu

SSM Flat

AVL Off

Balance 0

Sound

Sound menu

Input TV

Child lock Off

Auto sleep Off

Language English

Special

Special menu

DE F G

OK MENU EXIT

DE F G

OK MENU EXIT

DE F G

OK MENU EXIT

DE F G

OK MENU EXIT

Setting up TV stations

Up to 100 TV stations can be stored by programme numbers (0 to 99).

Once you have preset the stations, you will be able to use the DD / EE

or NUMBER buttons to scan the stations you have programmed.

Stations can be tuned using automatic or manual modes.

Auto programme tuning

All stations that can be received are stored by this method. It is rec-

ommended that you use auto programme during installation of this set.

1. Press the MENU button and then DD / EE button to select the

Station menu.

2. Press the OK or GGbutton and then DD / EE button to select Auto

programme.

3. Press the OK or GGbutton. Select a TV system with the FF / GG

button on the System menu;

L: SECAM L/L’(France)

BG : PAL B/G, SECAM B/G (Europe/East Europe)

I: PAL I/II (U.K./Ireland)

DK : PAL D/K, SECAM D/K (East Europe)

4. Press the DD / EE button to select Storage from.

5. Select the beginning programme number with the FF / GG button

or NUMBER buttons on the Storage from pull-down menu.Any

number under 10 is entered with a numeric ‘0’in front of it, i.e.

‘05’for 5.

6. Press the

DD / EE button to select Start.

7. Press the GGbutton to begin auto programming.

All receivable stations are stored. The station name is stored for

stations which broadcast VPS (Video Programme Service),

PDC (Programme Delivery Control) or TELETEXT data. If no

station name can be assigned to a station, the channel number

is assigned and stored as C(V/UHF 01-69) or S(Cable 01-47),

followed by a number.

To stop auto programming, press the MENU button.

When auto programming is completed, the Programme edit

menu appears on the screen. See the ‘Programme edit’section

to edit the stored programme.

8. Press the EXIT button to return to normal TV viewing.

VOL OK

123

456

789

SSM

VOL

EXIT MENU

Auto programme

Manual programme

Programme edit

Favourite programme

Station

Station menu

Station

System BG

Storage from 0

Start

Auto programme

Manual programme

Programme edit

Favourite programme

Station

System BG

Storage from 0

Start

9 C 54 35%

Auto programme

Manual programme

Programme edit

Favourite programme

DE F G

OK MENU EXIT

MENU EXIT

DE F G

OK MENU EXIT

Setting up TV stations

Manual programme tuning

Manual programme lets you manually tune and arrange the sta-

tions in whatever order you desire. Also you can assign a station

name with five characters to each programme number.

1. Press the MENU button and then DD / EE button to select the

Station menu.

2. Press the OK or GGbutton and then DD / EE button to select

Manual programme.

3. Press the OK or GGbutton and then DD / EE button to select Storage.

4. Select the desired programme number (0 to 99) with the FF / GG

button or NUMBER buttons on the Storage menu. Any number

under 10 is entered with a numeric ‘0’in front of it, i.e. ‘05’for 5.

5. Press the DD / EE button to select System.

6. Select a TV system with the FF / GGbutton on the System menu;

L: SECAM L/L’(France)

BG : PAL B/G, SECAM B/G (Europe/East Europe)

I: PAL I/II (U.K./Ireland)

DK : PAL D/K, SECAM D/K (East Europe)

7. Press the DD / EE button to select Channel.

8. Press the FF / GGbutton to select V/UHF or Cable on the

Channel menu.

If possible, select the channel number directly with the number

buttons. Any number under 10 is entered with a numeric ‘0’in

front of it, i.e. ‘05’for 5.

9. Press the DD / EE button to select Search.

10. Press the FF / GGbutton to commence searching on the Search

pull-down menu. If a station is found the search will stop.

11. Press the OK button to store it.

The display Stored will appear.

12. To store another station, repeat steps 3 to 11.

13. Press the EXIT button to return to normal TV viewing.

VOL OK

123

456

789

SSM

VOL

EXIT MENU

Auto programme

Manual programme

Programme edit

Favourite programme

Station

Station menu

DE F G

OK MENU EXIT

Station

Storage 4

System BG

Channel V/UHF 5

Fine

GGG

Name C O 5

Auto programme

Manual programme

Programme edit

Favourite programme

DE F G

0-9 OK MENU EXIT

Station

Storage 4

System BG

Channel V/UHF 5

Fine

GGG

Name C O 5

Auto programme

Manual programme

Programme edit

Favourite programme

DE F G

OK MENU EXIT

Stored

Inhaltsverzeichnis

Andere LG LCD-Fernseher Handbücher

Beliebte LCD-Fernseher Handbücher anderer Marken

Samsung

Samsung LA32E420 Leitfaden

Dell

Dell W1900 19 Gebrauchsanweisung

Samsung

Samsung LN40C670M1F Bedienungsanleitung

Toshiba

Toshiba 57X3000A Bedienungsanleitung

Runco

Runco CX-52HD Bedienungsanleitung

Sharp

Sharp LC-32AX3H Bedienungsanleitung

Philips

Philips 47PFL7704D Bedienungsanleitung

Vizio

Vizio VO42LFHDTV10A Bedienungsanleitung

Philips

Philips 42PF7520D/79 Bedienungsanleitung

Insignia

Insignia NS-LCD32-09 Bedienungsanleitung

Sony

Sony WEGA KLV-27HR3 Bedienungsanleitung

Nexus

Nexus NX32031 Bedienungsanleitung

Zenith

Zenith Z32LC2D Bedienungsanleitung

Sony

Sony KDL-32S3000R - 32" Class Bravia S-series Digital Lcd... Bedienungsanleitung

Medion

Medion MEDION LIFE X14330 Bedienungsanleitung

Vizio

Vizio HDTV30A VW32L Bedienungsanleitung

Sharp

Sharp LC-24DV250K Bedienungsanleitung

SOYO

SOYO Dymond DYLT032A Bedienungsanleitung