LG 37LDD Bedienungsanleitung

EUT Type: 37” LCD TV/ Monitor

FCC ID: BEJ37LDD

Test Report No.: GETEC-E3-05-081

FCC Class B Certification

APPENDIX H

: USER’S MANUAL

Please read this manual carefully before operating your set.

Retain it for future reference.

Record model number and serial number of the set.

See the label attached on the back cover and quote

this information to your dealer

when you require service.

P/NO : 3828TUL527A (0511-REV00)

Printed in Korea

OWNER’S MANUAL

LCD TV

MODELS: 32LC2D

37LC2D

42LC2D

PLASMA TV

MODELS: 42PC3D 42PC3D-UD

42PC3DV 42PC3DV-UD

50PC3D 50PC3D-UD

Internet Home Page : http://www.lge.com

http://www.lg.ca

Warning

WARNING:

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER

SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to

the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi-

cient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of

important operating and maintenance (servicing) instructions in the literature accompanying the appli-

ance.

NOTE TO CABLE/TV INSTALLER:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric

Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable

ground shall be connected to the grounding system of the building, as close to the point of the cable entry as prac-

tical.

REGULATORY INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

CAUTION:

Do not attempt to modify this product in any way without written authorization from LG Electronics Corporation.

Unauthorized modification could void the user’s authority to operate this product.

U.S.A. only -----------------------------------------------

COMPLIANCE:

The responsible party for this product’s compliance is:

LG Electronics U.S.A., Inc.

1000 Sylvan Avenue, Englewood Cliffs, NJ 07632

Phone: 1-201-816-2000

http://www.lgusa.com

---------------------------------------------------------------

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Warning

arning

Safety Instructions

WARNING :

To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain Or Moisture.

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the

apparatus.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug has

two blades and a third grounding prong. The wide blade

or the third prong is provided for your safety. When the

provided plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience recepta-

cles, and the point where they exit from the apparatus.

11. Only use the attachments / accessories specified by

the manufacturer.

Safety Instructions

Owner's Manual

Safety Instructions

12. Use only with a cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the appa-

ratus. When a cart is used, use caution when moving

the cart / apparatus combination to avoid injury from

tip-over.

13. Unplug this apparatus during lightning storms or when

unused for long periods of time.

14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normal-

ly, or has been dropped.

On Disposal

a. The fluorescent lamp used in this product contains a small amount of mercury.

b. Do not dispose of this product with general household waste.

Disposal of this product must be carried out in accordance to the regulations of your local authority.

Note

- If the TV feels cold to the touch, there may be a small “flicker” when when it is turned on. This is normal, there is noth-

ing wrong with TV.

- Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have

no adverse effect on the monitor's performance.

- Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some

temporary distortion effects on the screen.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that

appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords,

or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire.

Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discon-

tinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.

Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or

walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

Introduction

Controls

Controls (Model Name: 32/37/42LC2D)

(Model Name: 32/37/42LC2D)

- This is a simplified representation of front panel.

- Here shown may be somewhat different from your TV.

VOL

ENTER

INPUT

ON/OFF

CHANNEL Buttons

VOLUME Buttons

ENTER Button

MENU Button

INPUT Button

ON/OFF Button

Remote Control Sensor

Power/Standby Indicator

• illuminates red in standby mode.

• illuminates green when the set is

switched on.

Introduction

Connection Options (Model Name: 32/37/42LC2D)

AC IN

AV IN 2

MONO

AUDIO

S-VIDEO

VIDEO

HDMI/DVI IN

DIGITAL AUDIO OUT

OPTICAL

RS-232C IN

(CONTROL

&SERVICE)

SERVICE)

REMOTE

CONTROL

RGB IN

(PC

DTV)

AUDIO IN

(RGB/DVI)

VIDEO

AUDIO

MONO

( )

VIDEO

AUDIO

COMPONENT IN

S-VIDEO

AV IN 1

AV OUT

ANTENNA

CABLE

AC IN

AUDIO Input

S-VIDEO Input

VIDEO Input

DIGITAL AUDIO OUT

OPTICAL

AV OUT

AV IN1

COMPONENT IN 1/2

HDMI / DVI IN

ANTENNA IN

CABLE IN AUDIO IN

(RGB/DVI)

RGB IN

(PC/DTV)

AC IN

RS-232C INPUT

(CONTROL&SERVICE)

REMOTE CONTROL Port

- Here shown may be somewhat different from your TV.

Installation

Desktop Pedestal Installation

4 inches

4 inches4 inches

4 inches 4 inches

4 inches4 inches

4 inches

For proper ventilation, allow a clearance of 4" on each side and from the wall.

GROUNDING

Ensure that you connect the earth ground wire to prevent pos-

sible electric shock. If grounding methods are not possible,

have a qualified electrician install a separate circuit breaker.

Do not try to ground the unit by connecting it to telephone

wires, lightening rods, or gas pipes.

Power

Supply

Short-circuit

Breaker

• The TV can be installed in various ways such as on a wall, or on a desktop etc.

• The TV is designed to be mounted horizontally.

Installation

How to join the product assembly to the wall to protect the set tumbling

- Set it up close to the wall so the product doesn’t fall over when it is pushed backwards.

- The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the prod-

uct doesn’t fall over when it is pulled in the forward direction. It will prevent the product from falling for-

ward and hurting people. It will also prevent the product from damage caused by fall. Please make sure

that children don’t climb on or hang from the product.

42PC3D/42PC3DV/50PC3D

Notes

• When moving the product to another place undo the ropes first.

• Use a product holder or a cabinet that is big and strong enough for the size and weight of the product.

• To use the product safely make sure that the height of the bracket that is mounted on the wall is same

as that of the product.

Use the bracket and the bolt to fix the product to the wall as shown in the picture.

Secure the bracket with the bolt (not provided as parts of the product, must purchase separately) on

the wall.

Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product.

It is safer to tie the rope so it becomes horizontal between the wall and the product.

32/37/42LC2D

If the set will be mounted on a desk top, insert the 2 eye-bolts and tighten them securely in the upper

holes as shown.

Install the wall brackets on the wall with 2 bolts*, (not supplied with the product), as shown.

Match the height of the eye-bolts and the wall brackets.

Check to be sure the eye-bolts and the brackets are tightened securely.

Secure the TV assembly to the wall with strong strings or wire cables, (not supplied with the product), as

shown.

Installation

Digital Audio Output

Connect one end of an optical cable to the TV

Digital Audio Optical Output port.

Connect the other end of the optical cable to the

digital audio optical input on the audio equipment.

See the external audio equipment instruction

manual for operation.

When connecting with external audio equip-

ments, such as amplifiers or speakers, please

turn the TV speakers off.

HDMI/DVI IN

DIGITAL AUDIO OUT

OPTICAL

RS-232C INRS-232C IN

(CONTROL&SERVICE)

- Send the TV’s audio to external audio equipment (stereo system) via the Digital Audio Output Optical port.

CAUTION

Do not look into the optical output port. Looking at the laser beam may damage your vision.

1/2

Monitor Out Setup

Connect the second TV or monitor to the TV’s AV

OUTPUT jacks.

See the Operating Manual of the second TV or

monitor for further details regarding that device’s

input settings.

S-VIDEO IN

(R) AUDIO (L)

VIDEO

VIDEOVIDEO

AUDIO

MONO

( )

VIDEOVIDEO

AUDIOUDIO

COMPONENT IN

S-VIDEO

AV IN 1

AV OUT

- The TV has a special signal output capability which allows you to hook up a second TV or monitor.

1/2

• Component 1-2, RGB-PC/RGB-DTV,

HDMI/DVI, DTV input sources cannot be used

for Monitor out.

• When connecting with external audio equip-

ments, such as amplifiers or speakers, please

turn the TV speakers off. (Refer to p.43)

• We recommend to use the video and audio

output jacks for VCR recording.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere LG LCD-Fernseher Handbücher

LG 55WV70MS Bedienungsanleitung

LG 32LS340 Series Bedienungsanleitung

LG 26LQ630H-UA Bedienungsanleitung

LG Infinia 55LW5700 Bedienungsanleitung

LG 19LD330-TA Bedienungsanleitung

LG 23LC1RB-TB Bedienungsanleitung

LG 37LB7DF Bedienungsanleitung

LG 32LB4D - - 32" LCD TV Bedienungsanleitung

LG 55LH85 - - 54.6" LCD TV Bedienungsanleitung

LG 32LC7D Series Bedienungsanleitung

LG 47LH90 - - 47" LCD TV Bedienungsanleitung

LG 32LM6300PLA Bedienungsanleitung

LG M2432D Bedienungsanleitung

LG UB85 Series Bedienungsanleitung

LG 37LB1DA - - 37" LCD TV Bedienungsanleitung

LG 37LH55 - - 37" LCD TV Bedienungsanleitung

LG 17LS5R Series Bedienungsanleitung

LG 32LG700H Bedienungsanleitung

LG LB63 Series Bedienungsanleitung

LG 32LX4DC-UB Bedienungsanleitung

LG 32LE5500 Bedienungsanleitung

LG 15LW1R Bedienungsanleitung

LG 84LM9600 Bedienungsanleitung

LG 43UF64 Series Bedienungsanleitung

Beliebte LCD-Fernseher Handbücher anderer Marken

Samsung

Samsung LA32E420 Leitfaden

Dell

Dell W1900 19 Gebrauchsanweisung

Samsung

Samsung LN40C670M1F Bedienungsanleitung

Toshiba

Toshiba 57X3000A Bedienungsanleitung

Runco

Runco CX-52HD Bedienungsanleitung

Sharp

Sharp LC-32AX3H Bedienungsanleitung

Philips

Philips 47PFL7704D Bedienungsanleitung

Vizio

Vizio VO42LFHDTV10A Bedienungsanleitung

Philips

Philips 42PF7520D/79 Bedienungsanleitung

Insignia

Insignia NS-LCD32-09 Bedienungsanleitung

Sony

Sony WEGA KLV-27HR3 Bedienungsanleitung

Nexus

Nexus NX32031 Bedienungsanleitung

Zenith

Zenith Z32LC2D Bedienungsanleitung

Sony

Sony KDL-32S3000R - 32" Class Bravia S-series Digital Lcd... Bedienungsanleitung

Medion

Medion MEDION LIFE X14330 Bedienungsanleitung

Vizio

Vizio HDTV30A VW32L Bedienungsanleitung

Sharp

Sharp LC-24DV250K Bedienungsanleitung

SOYO

SOYO Dymond DYLT032A Bedienungsanleitung