LG 42LS3400 Bedienungsanleitung

www.lg.com

Please read this manual carefully before operating your set and retain it

for future reference.

P/NO : SAC35375602 (1206-REV07)

OWNER’S MANUAL

LED LCD TV / LCD TV

LED LCD TV MODELS LCD TV MODELS

32LS3400

32LS3410

42LS3400

32LS3450

42LS3450

22LS3500

26LS3500

32LS3500

22LS3510

26LS3510

32LS3510

32CS460

32CS461

42CS530

32CS560

37CS560

42CS560

ENGLISH

2IMPORTANT SAFETY INSTRUCTIONS

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK). NO

USER SERVICEABLE PARTS INSIDE. REFER

TO QUALIFIED SERVICE PERSONNEL.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead

symbol, within an equilateral triangle,

is intended to alert the user to the

presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of

electric shock to persons.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The exclamation point within an

equilateral triangle is intended to alert

the user to the presence of important

operating and maintenance (servicing)

instructions in the literature accompanying

the appliance.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND

ELECTRIC SHOCK, DO NOT EXPOSE THIS

PRODUCT TO RAIN OR MOISTURE.

 Do not use this apparatus near water.

Short-circuit

Breaker

Power Supply

 Clean only with a dry cloth.

Short-circuit

Breaker

Power Supply

 Do not block any ventilation openings. Install

in accordance with the manufacturer’s

instructions.

Short-circuit

Breaker

Power Supply

 Do not install near any heat sources such

as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

Short-circuit

Breaker

Power Supply

 Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized

plug has two blades with one wider than the

other. A grounding type plug has two blades

and a third grounding prong. The wide blade

or the third prong are provided for your safety.

If the provided plug does not fit into your

outlet, consult an electrician for replacement

of the obsolete outlet (Can differ by country).

Short-circuit

Breaker

Power Supply

IMPORTANT SAFETY INSTRUCTIONS

Always comply with the following precautions to avoid dangerous situations and ensure peak performance

of your product.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Short-circuit

Breaker

Power Supply

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

 Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit

from the apparatus.

Short-circuit

Breaker

Power Supply

 Only use attachments/accessories specified

by the manufacturer.

Short-circuit

Breaker

Power Supply

 Use only with a cart, stand, tripod, bracket,

or table specified by the manufacturer, or

sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

Short-circuit

Breaker

Power Supply

 Unplug this apparatus during lightning

storms or when unused for long periods of

time.

Short-circuit

Breaker

Power Supply

 Refer all servicing to qualified service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does

not operate normally, or has been dropped.

Short-circuit

Breaker

Power Supply

 Do not stick metal objects or any other

conductive material into the power cord. Do

not touch the end of the power cord while it

is plugged in.

 Keep the packing anti-moisture material or

vinyl packing out of the reach of children.

Anti-moisture material is harmful if

swallowed. If swallowed by mistake, force

the patient to vomit and visit the nearest

hospital. Additionally, vinyl packing can

cause suffocation. Keep it out of the reach of

children.

 CAUTION concerning the Power Cord

(Can differ by country):

It is recommended that appliances be

placed upon a dedicated circuit; that is, a

single outlet circuit which powers only that

appliance and has no additional outlets or

branch circuits. Check the specification page

of this owner’s manual to be certain. Do not

connect too many appliances to the same

AC power outlet as this could result in fire or

electric shock. Do not overload wall outlets.

Overloaded wall outlets, loose or damaged

wall outlets, extension cords, frayed power

cords, or damaged or cracked wire insulation

are dangerous. Any of these conditions could

result in electric shock or fire. Periodically

examine the cord of your appliance, and

if its appearance indicates damage or

deterioration, unplug it, discontinue use of

the appliance, and have the cord replaced

with an exact replacement part by an

authorized service. Protect the power cord

from physical or mechanical abuse, such as

being twisted, kinked, pinched, closed in a

door, or walked upon. Pay particular attention

to plugs, wall outlets, and the point where

the cord exits the appliance. Do not move

the TV with the power cord plugged in. Do

not use a damaged or loose power cord. Be

sure do grasp the plug when unplugging the

power cord. Do not pull on the power cord

to unplug the TV.

Short-circuit

Breaker

Power Supply

ENGLISH

4IMPORTANT SAFETY INSTRUCTIONS

 Warning - To reduce the risk of fire or

electrical shock, do not expose this product

to rain, moisture or other liquids. Do not

touch the TV with wet hands. Do not install

this product near flammable objects such

as gasoline or candles, or expose the TV to

direct air conditioning.

Short-circuit

Breaker

Power Supply

 Do not expose to dripping or splashing and

do not place objects filled with liquids, such

as vases, cups, etc. on or over the apparatus

(e.g. on shelves above the unit).

Short-circuit

Breaker

Power Supply

 Grounding

(Except for devices which are not grounded.)

Ensure that you connect the earth ground

wire to prevent possible electric shock

(i.e. a TV with a three-prong grounded AC

plug must be connected to a three-prong

grounded AC outlet). If grounding methods

are not possible, have a qualified electrician

install a separate circuit breaker. Do not try to

ground the unit by connecting it to telephone

wires, lightening rods, or gas pipes.

Short-circuit

Breaker

Power Supply

 DISCONNECTING DEVICE FROM THE MAIN

POWER

Mains plug is the disconnecting device. The

plug must remain readily operable.

 As long as this unit is connected to the AC

wall outlet, it is not disconnected from the

AC power source even if the unit is turned

off.

 Do not attempt to modify this product in any

way without written authorization from LG

Electronics. Unauthorized modification could

void the user’s authority to operate this

product.

 ANTENNAS Outdoor antenna grounding

(Can differ by country):

If an outdoor antenna is installed, follow

the precautions below. An outdoor antenna

system should not be located in the vicinity

of overhead power lines or other electric light

or power circuits, or where it can come in

contact with such power lines or circuits as

death or serious injury can occur. Be sure the

antenna system is grounded so as to provide

some protection against voltage surges

and built-up static charges. Section 810 of

the National Electrical Code (NEC) in the

U.S.A. provides information with respect to

proper grounding of the mast and supporting

structure, grounding of the lead-in wire to

an antenna discharge unit, size of grounding

conductors, location of antenna discharge

unit, connection to grounding electrodes and

requirements for the grounding electrode.

Antenna grounding according to the National

Electrical Code, ANSI/NFPA 70

Short-circuit

Breaker

Power Supply

NEC: National Electrical Code

Ground Clamp

Antenna Lead in Wire

Antenna Discharge Unit

(NEC Section 810-20)

Grounding Conductor

(NEC Section 810-21)

Power Service Grounding

Electrode System

(NEC Art 250, Part H)

Electric Service

Equipment

Ground Clamp

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

 Cleaning

When cleaning, unplug the power cord and

wipe gently with a soft cloth to prevent

scratching. Do not spray water or other

liquids directly on the TV as electric shock

may occur. Do not clean with chemicals

such as alcohol, thinners or benzine.

 Moving

Make sure the product is turned off,

unplugged and all cables have been

removed. It may take 2 or more people to

carry larger TVs. Do not press or put stress

on the front panel of the TV.

 Ventilation

Install your TV where there is proper

ventilation. Do not install in a confined

space such as a bookcase. Do not cover the

product with cloth or other materials while

plugged. Do not install in excessively dusty

places.

 If you smell smoke or other odors coming

from the TV, unplug the power cord and

contact an authorized service center.

 Do not press strongly upon the panel with a

hand or a sharp object such as a nail, pencil

or pen, or make a scratch on it.

 Keep the product away from direct sunlight.

Short-circuit

Breaker

Power Supply

 Never touch this apparatus or antenna during

a thunder or lightning storm.

 When mounting a TV on the wall, make sure

not to install the TV by hanging the power

and signal cables on the back of the TV.

 Do not allow an impact shock or any objects

to fall into the product, and do not drop

anything onto the screen.

 Dot Defect

The Plasma or LCD panel is a high

technology product with resolution of two

million to six million pixels. In a very few

cases, you could see fine dots on the screen

while you’re viewing the TV. Those dots

are deactivated pixels and do not affect the

performance and reliability of the TV.

 Generated Sound

“Cracking” noise: A cracking noise that

occurs when watching or turning off the TV

is generated by plastic thermal contraction

due to temperature and humidity. This noise

is common for products where thermal

deformation is required.

Electrical circuit humming/panel buzzing: A

low level noise is generated from a high-

speed switching circuit, which supplies a

large amount of current to operate a product.

It varies depending on the product.

This generated sound does not affect the

performance and reliability of the product.

 Take care not to touch the ventilation

openings. When watching the TV for a long

period, the ventilation openings may become

hot. This does not affect the performance of

the product or cause defects in the product.

 If the TV feels cold to the touch, there may

be a small “flicker” when it is turned on. This

is normal, there is nothing wrong with TV.

Some minute dot defects may be visible on

the screen, appearing as tiny red, green, or

blue spots. However, they have no adverse

effect on the TV’s performance. Avoid

touching the LCD screen or holding your

finger(s) against it for long periods of time.

Doing so may produce some temporary

distortion effects on the screen.

ENGLISH

6IMPORTANT SAFETY INSTRUCTIONS

For USA and Canada

FCC NOTICE

This equipment has been tested and found

to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a

residential installation. This equipment generates,

uses and can radiate radio frequency energy and,

if not installed and used in accordance with the

instructions, may cause harmful interference

to radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning

the equipment off and on, the user is encouraged

to try to correct the interference by one or more

of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the

equipment and the receiver.

- Connect the equipment to an outlet on

a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/

TV technician for help.

This device complies with part 15 of the FCC

Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful

interference and (2) this device must accept any

interference received, including interference that

may cause undesired operation of the device.

Any changes or modifications in construction of

this device which are not expressly approved by

the party responsible for compliance could void

the user’s authority to operate the equipment.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV

system installer’s attention to Article 820-40 of

the National Electric Code (U.S.A.). The code

provides guidelines for proper grounding and, in

particular, specifies that the cable ground shall

be connected to the grounding system of the

building, as close to the point of the cable entry

as practical.

DISPOSAL (Hg lamp only used in LCD TVs)

The fluorescent lamp used in this product contains

a small amount of mercury. Do not dispose of this

product with general household waste. Disposal of

this product must be carried out in accordance to

the regulations of your local authority.

ENGLISH

LICENSES / OPEN SOURCE SOFTWARE NOTICE

LICENSES

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D

symbol are trademarks of Dolby Laboratories.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or

registered trademarks of HDMI Licensing LLC.

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this

product, please visit http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are

available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of

performing such distribution (such as the cost of media, shipping and handling) upon email request to

[email protected]. This offer is valid for three (3) years from the date on which you purchased the

product.

ENGLISH

8TABLE OF CONTENTS

TABLE OF CONTENTS

2 IMPORTANT SAFETY

INSTRUCTIONS

7 LICENSES

7 OPEN SOURCE SOFTWARE

NOTICE

8 TABLE OF CONTENTS

10 INSTALLATION PROCEDURE

10 ASSEMBLING AND PREPARING

10 Unpacking

16 Parts and buttons

19 Lifting and moving the TV

20 Setting up the TV

20 - Attaching the stand

28 - Mounting on a table

30 - Mounting on a wall

31 - Tidying cables

32 REMOTE CONTROL

34 WATCHING TV

34 Connecting to the AC/DC adapter

34 Turning the TV on for the first time

35 Watching TV

35 Managing channels

35 - Setting up channels

36 - Using favorite channels

37 - Checking current program info

38 Using additional options

38 - Adjusting aspect ratio

39 - Changing AV modes

39 - Using the input list

40 Using the quick menu

41 ENTERTAINMENT

41 - Connecting USB storage devices

42 - Browsing files

43 - Viewing Photos

44 - Listening to music

46 CUSTOMIZING TV SETTINGS

46 The Main Menus

47 Customizing Settings

47 - CHANNEL Settings

48 - PICTURE Settings

51 - AUDIO Settings

52 - TIME Settings

53 - OPTION Settings

55 - LOCK Settings

ENGLISH

TABLE OF CONTENTS

57 MAKING CONNECTIONS

57 Connecting to an antenna or cable

58 Connection Overview

59 Connecting to a HD receiver, DVD, or

VCR player

59 - HDMI Connection

60 - Component Connection

61 - Composite Connection

62 Connecting to a PC

62 - HDMI Connection

63 Connecting to a USB

64 SIMPLINK Connection

64 - Activating and Using the SIMPLINK

menus

65 MAINTENANCE

65 Cleaning Your TV

65 - Screen, frame, cabinet and stand

65 - Power cord

65 Preventing “Image burn” or “Burn-in” on

your TV screen

66 TROUBLESHOOTING

68 SPECIFICATIONS

71 IR CODES

 Image shown may differ from your TV.

 Your TV’s OSD (On Screen Display) may

differ slightly from that shown in this

manual.

 The available menus and options may differ

from the input source or product model that

you are using.

 New features may be added to this TV in

the future.

NOTE

ENGLISH

10 ASSEMBLING AND PREPARING

INSTALLATION PROCEDURE

1 Open the package and make sure all the accessories are included.

2 Attach the stand to the TV set.

3 Connect an external device to the TV set.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local

dealer where you purchased your product. The illustrations in this manual may differ from the actual

product and item.

 The items supplied with your product may vary depending on the model.

 Product specifications or contents of this manual may be changed without prior notice due to

upgrade of product functions.

 For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39

inches) thick and 18 mm (0.7 inches) width.

 Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit

into your TV's USB port.

*A 10 mm (0.39 inches)

*B 18 mm (0.7 inches)

NOTE

 Do not use any unapproved items to ensure the safety and product life span.

 Any damages or injuries by using unapproved items are not covered by the warranty.

 In case of some model, the thin film on screen is a part of TV, So don’t take it off.

CAUTION

Andere Handbücher für 42LS3400

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere LG LCD-Fernseher Handbücher

Beliebte LCD-Fernseher Handbücher anderer Marken

Samsung

Samsung LA32E420 Leitfaden

Dell

Dell W1900 19 Gebrauchsanweisung

Samsung

Samsung LN40C670M1F Bedienungsanleitung

Toshiba

Toshiba 57X3000A Bedienungsanleitung

Runco

Runco CX-52HD Bedienungsanleitung

Sharp

Sharp LC-32AX3H Bedienungsanleitung

Philips

Philips 47PFL7704D Bedienungsanleitung

Vizio

Vizio VO42LFHDTV10A Bedienungsanleitung

Philips

Philips 42PF7520D/79 Bedienungsanleitung

Insignia

Insignia NS-LCD32-09 Bedienungsanleitung

Sony

Sony WEGA KLV-27HR3 Bedienungsanleitung

Nexus

Nexus NX32031 Bedienungsanleitung

Zenith

Zenith Z32LC2D Bedienungsanleitung

Sony

Sony KDL-32S3000R - 32" Class Bravia S-series Digital Lcd... Bedienungsanleitung

Medion

Medion MEDION LIFE X14330 Bedienungsanleitung

Vizio

Vizio HDTV30A VW32L Bedienungsanleitung

Sharp

Sharp LC-24DV250K Bedienungsanleitung

SOYO

SOYO Dymond DYLT032A Bedienungsanleitung