LG 32LS350S.ABG Bedienungsanleitung

User Guide

This is a 「User Guide」 installed on the TV.

The contents of this guide are subject to change without prior notice for quality

improvement.

GP2



 

 

 



 

 



 







GP2

eng

❐Automatically Setting Up Programme

SETTINGS ➾ SETUP ➙Auto Tuning

Automatically tunes the programmes.

1 Select Country where the TV is used. Programme settings change depending

on the country you choose.

2 Initiate Auto Tuning.

3 Select Input Source of your choice.

4 Set Auto Tuning following screen instructions.

✎If Input Source is not connected properly, programme registration may not

work.

✎Auto Tuning only finds programmes that are currently broadcasting.

✎If Lock System is turned on, a pop-up window will appear asking for

password.

GP2

eng

❓Cable DTV Setting option

When searching for programmes using FULL setting it can take a long time. The

following values are needed in order to search all available programmes quickly

and correctly. The commonly used values are provided as “default”.

• Frequency : Enter a user-defined frequency.

• Symbol rate : Enter a user-defined symbol rate (Symbol rate: Speed at which

a device such as modem sends symbols to a channel).

• Modulation : Enter a user-defined modulation. (Modulation: Loading of audio

or video signals onto carrier).

• Network ID : Unique identifier allocated for each user.

• Start Frequency : Enter a user-defined start frequency range.

• End Frequency : Enter a user-defined end frequency range.

GP2

eng

❓Satellite Setting Option

• Satellite : Select your desired Satellite.

• LNB Frequency : Select one value from 9750/10600, 9750/10750, 9750,

10600,10750, 5150. If you select 9750/10600, 9750/10750(MHz), 22KHz Tone is

disabled. If you cannot find the LNB frequency value from the list, select User

and manually enter the frequency.

• Transponder : Select the transponder you want to tune.

• 22KHz Tone : When using 22KHz Tone switch, select A or B. If you use 22KHz

Tone, Unicable and Motor Type are disabled.

• LNB Power : To enable the power supply for the LNB, select On. If you select

Off, Motor Type is disabled.

GP2

eng

• DiSEqC : When using DiSEqC, select one option from A~D/ToneA~B. If you

use DiSEqC, Unicable and Motor Type are disabled.

• Unicable Settings : Select On to use Unicable and set the Unicable in the

Unicable Setting menu. When Unicable is enabled, 22KHz Tone, DiSEqC,

Motor Type are disabled.

• Motor Type : Select Motor Type to use Motor and set the Motor in the Motor

Setting menu. When Motor is enabled, 22KHz Tone, DiSEqC, Unicable are

disabled.

✎If you set satellite to others, you must add a transponder using Manual

Tuning.

✎When selecting 22KHz Tone and DiSEqc, you must connect them in the same

position as displayed on the OSD.

✎If you delete a Satellite, all programmes stored in the Satellite are deleted.

GP2

eng

❓Motor Setting Option

• DiSEqC 1.2 : Control motor to change satellite dish position.

Drive Direction : Select the direction in which you want to move the motor.

Drive Mode : Two modes are available: Step and Continuous.

-Step: The motor moves based on the value you ente r (from 1 to 128).

-Continuous: The motor moves continuously until you press the Stop.

Test TP : Select the test TP you want to tune.

Set Limit : Set the motor movement to east or west to have the motor move

only within the direction set.

-On: You can limit the movement to the current direction by selecting the

West/East.

-Off: You can cancel the limit you set.

GP2

eng

Go To Zero: You can move the motor to Zero

Store: You can save the motor’s current direction.

• USALS : Set your current location(Longitude/Latitude).

GP2

eng

❐Cable DTV Setting

SETTINGS ➾ SETUP ➙ Cable DTV Setting

[In Cable, Cable & Satellite mode only]

When Channel Auto Update is On, you can update information for all the

programmes that can be updated, including the programme currently being

watched. When Channel Auto Update is Off, you can only update information for

the programme currently being watched.

✎The range that a user can select from the Service Operator menu differs

depending on number of Service Operator supported by each country.

✎If number of supported Service Operator for each country is 1, corresponding

function becomes inactive.

✎You can not select the Cable DTV Setting when the service operator is set to

“Ziggo”.

GP2

eng

❐Satellite Setting

SETTINGS ➾ SETUP ➙ Satellite Setting

[In Satellite, Antenna & Satellite, Cable & Satellite mode only]

You can add/delete/set the satellite you want.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere LG LED-Fernseher Handbücher

LG 49UH7700 Bedienungsanleitung

LG UP7500 Bedienungsanleitung

LG 49US761H0GA.AFFD Bedienungsanleitung

LG 22MA33N Bedienungsanleitung

LG 43US66 Series Bedienungsanleitung

LG 55LN5100 Bedienungsanleitung

LG 86QNED99TPB Bedienungsanleitung

LG 50LA621Y.AMF Bedienungsanleitung

LG 24LV570M Kurzanleitung

LG 39LN5100.APH Bedienungsanleitung

LG LF65 Series Bedienungsanleitung

LG 43LM5700PUA Bedienungsanleitung

LG 42LE4300 Bedienungsanleitung

LG 43UJ67V Series Bedienungsanleitung

LG 15LS766A0UA.AUS Bedienungsanleitung

LG 65US761H0CD Bedienungsanleitung

LG SK81 Series Bedienungsanleitung

LG 43LW310C.BTR Bedienungsanleitung

LG 65QNED81SRA Bedienungsanleitung

LG 43UH6500.ACCS Kurzanleitung

LG 86UR9000PUA Bedienungsanleitung

LG 75UH85 Series Bedienungsanleitung

LG 28LM4 0B-PU Series Bedienungsanleitung

LG 32LK54 Series Bedienungsanleitung

Beliebte LED-Fernseher Handbücher anderer Marken

SWEDX

SWEDX SS-42K15 Bedienungsanleitung

Akai

Akai LT-3222AD Bedienungsanleitung

Bush

Bush DLED55UHDSFIRE Bedienungsanleitung

Philips

Philips 32PFL3078K/12 Bedienungsanleitung

Hyundai

Hyundai H-LED2202-F Bedienungsanleitung

Sansui

Sansui SLED1928 Bedienungsanleitung

Philips

Philips 50PUN7625/61 Bedienungsanleitung

Berkshire

Berkshire 26LEDF3200B Bedienungsanleitung

Philips

Philips 22PFL4507 Bedienungsanleitung

Quasar

Quasar SQ3208 Bedienungsanleitung

Allview

Allview 32ATC6000-H Bedienungsanleitung

Insignia

Insignia NS-22E400NA14 Bedienungsanleitung

Insignia

Insignia NS-55E480A13A Kurzanleitung

Fox

Fox 32AOS440D Bedienungsanleitung

AOC

AOC LE32D5210_65 Bedienungsanleitung

Bauhn

Bauhn ATV24FHDC-0620 Bedienungsanleitung

Samsung

Samsung 5 Series Bedienungsanleitung

Nevir

Nevir NVR-7421-39-HD-N Bedienungsanleitung