LG 19MB35PM Bedienungsanleitung
www.lg.com
ENGLISH
OWNER’S MANUAL
IPS LED MONITOR
(LED LCD MONITOR)
19MB35PM
22MB35PM
23MB35PM
Please read this manual carefully before operating
your set and retain it for future reference.
IPS LED(LED LCD) MONITOR MODEL
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other
reproductive harm. Wash hands after handling.
2
ENG
ENGLISH
TABLE OF CONTENTS
CONTENTS
3 ASSEMBLINGANDPREPAR-
ING
3 Unpacking
4 Parts and buttons
5 Setting up the Monitor set
5 - Attaching the Stand Base
5 - Detaching the stand base
6 - Detaching the stand body
7 - Mounting on a table
7 - Adjusting the angle
8 - Adjusting the stand height
8 - Using the Kensington locking device
9 - Swivel stand
9 - Using the Pivot function
10 - Mounting on a wall
11 USINGTHEMONITORSET
11 Connecting to a PC
11 - D-SUB connection
11 - DVI-D connection
12 - Peripheral device connection
13 CUSTOMIZINGSETTINGS
14 Customizing Settings
14 - Menu Settings
15 - Picture
16 - Color
17 - Display
18 - Others
19 READER Setting
20 - SUPER ENERGY SAVING
21 TROUBLESHOOTING
23 SPECIFICATIONS
23 19MB35PM
24 22MB35PM
25 23MB35PM
26 Preset Modes (Resolution)
26 Indicator
27 PROPERPOSTURE
27 Proper posture for using the Monitor set.
3
ENG
ENGLISH
ASSEMBLING AND PREPARING
ASSEMBLINGANDPREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
Do not use any unapproved accessories to ensure the safety and product life span.
Any damages or injuries by using unapproved accessories are not covered by the warranty.
The accessories supplied with your product may vary depending on the model.
Product specifications or contents in this manual may be changed without prior notice due to upgrade
of product functions.
CAUTION
NOTE
StandBase
CD(Owner'sManual)/
Card
D-SUBCable
(This cable is not included in all
countries.)
( Depending on the country )
PowerCord
DVI-DCable
(This cable is not included in all
countries.)
AudioCable
4
ENG
ENGLISH
ASSEMBLING AND PREPARING
Partsandbuttons
(Power Button)
PowerIndicator
LED On : Power is on
LED Off: Power is off
Front Side Buttons
Input Connectors (See p.11 to 12)See p.11 to 12) to 12)12))
5
ENG
ENGLISH
ASSEMBLING AND PREPARING
SettinguptheMonitorset
AttachingtheStandBase
1 Place the Monitor set with the screen side
down on a flat and cushioned surface.
StandBase
StandBody
StandBase
StandBody
To protect the screen from scratches, cover
the surface with a soft cloth.
3 Using a coin, turn the screw clockwise to se-
curethestandbase.
2 Check the position(atthefrontandrear)of
the stand body,thenmount the standbase on
the standbodyas shown in the figure.
CAUTION
StandBase
The components appearing in the illustra-
tions may look different from the actual prod-
uct.
Do not carry the monitor upside-down as this
may cause it to fall off its stand, resulting in
damage or injury.
To avoid damaging the screen when lifting
or moving the monitor, only hold the stand or
the plastic cover. This avoids putting unnec-
essary pressure on the screen.
Only remove the tape and the locking pin
when the monitor is mounted on the stand
base and is in an upright position. Otherwise,
the stand body may protrude, which may
lead to injury.
Detachingthestandbase
1 Place the monitor's screen face down.
To protect the screen from scratches, cover the
surface with a soft cloth.
2 Using a coin, turn the screw in the stand base
counterclockwise. Detach the standbasefrom
the standbody.
CAUTION
6
ENG
ENGLISH
ASSEMBLING AND PREPARING
Detachingthestandbody
1 Place the monitor's screen face down. To
protect the screen from scratches, cover the
surface with a soft cloth.
2 Using a screwdriver, remove the four screws
and detach the stand from the monitor.
7
ENG
ENGLISH
ASSEMBLING AND PREPARING
Adjustingtheangle
1 Place the monitor mounted on the stand base
in an upright position.
2 Adjust the angle of the screen. The angle of
the screen can be adjusted up to 5° forwards
and 20° backwards for a comfortable viewing
experience.
To avoid injury to the fingers when adjusting
the screen, do not hold the lower part of the
monitor's frame as illustrated below.
Be careful not to touch or press the screen
area when adjusting the angle of the monitor.
WARNING
Mountingonatable
1 Lift the monitor and place it on the table in an
upright position.
Install at least 10cmaway from the wall to
ensure sufficient ventilation.
2
3 Press the (Power) button on the front of the
monitor to turn on the monitor.
10 cm
10 cm
10 cm
10 cm
Unplug the power cord prior to moving or
installing the monitor. There is risk of electric
shock.
CAUTION
FrontSideRearSide
Connect the Power cord to the monitor, then
plug the power cord into the wall outlet.
8
ENG
ENGLISH
ASSEMBLING AND PREPARING
Using the Kensington locking
device
The connector for the Kensington lock is located
on the rear of the monitor.
For more information on installation and usage,
refer to the Kensington lock user manual or visit
the website at http://www.kensington.com.
Connect the monitor to the table with the Kensing-
ton lock cable.
Using the Kensington lock is optional. The
accessories can be purchased at your local
electronics store.
NOTE
Once the pin is removed, it is not necessary
to re-insert it to adjust the height.
Adjustingthestandheight
1 Place the monitor mounted on the stand base
in an upright position.
2 Remove the tape attached at the bottom rear
of thestandbody,then pull out the locking
pin.
3 The height can be adjusted up to 110mm.
Do not put your finger be-
tween the screen and the
base (chassis) when adjust-
ing the screen's height.
Tape
LockingPin
StandBody
CAUTION
WARNING
110.0mm
19MB35PM 22MB35PM 23MB35PM
9
ENG
ENGLISH
ASSEMBLING AND PREPARING
Swivelstand
Image shown may differ from your Monitor
set.
1 Swivel 355 degrees and adjust the angle of the
Monitor set to suit your view.
1 Lift the monitor to its highest height to utilize
the Pivot function.
UsingthePivotfunction
The pivot function allows you to rotate the screen
90 degrees clockwise.
2 Landscape & Portrait : You can rotate the panel
90° clockwise. Please be cautious and avoid
contact between the monitor head and the
Stand Base when rotating the screen to access
the Pivot function. If the monitor head touches
the Stand Base, then the Stand Base could
crack.
Head
section
Stand
section
3 Be careful with the cables when rotating the
screen.
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere LG Monitor Handbücher
LG
LG M2343A Bedienungsanleitung
LG
LG M1950D-PZ Bedienungsanleitung
LG
LG 27MP450P Bedienungsanleitung
LG
LG 25UM64 Bedienungsanleitung
LG
LG 27UN880P Bedienungsanleitung
LG
LG 32UN550-W.AFB Bedienungsanleitung
LG
LG W1943SE-PF Bedienungsanleitung
LG
LG 34UM67 Bedienungsanleitung
LG
LG M4224FCBA Bedienungsanleitung
LG
LG L1510SF Bedienungsanleitung
LG
LG M3204CCBA Bedienungsanleitung
LG
LG 22MP57A Bedienungsanleitung
LG
LG L1512S Bedienungsanleitung
LG
LG M5520C Bedienungsanleitung
LG
LG 27MP35VQ-B Bedienungsanleitung
LG
LG 43BN70UP Bedienungsanleitung
LG
LG W2220P-BF Bedienungsanleitung
LG
LG 24BP55Q Bedienungsanleitung
LG
LG Flatron W2453TQ Bedienungsanleitung
LG
LG M2343A Bedienungsanleitung
