LG 22BK55WV Bedienungsanleitung
www.lg.com
OWNER’S MANUAL
IPS LED MONITOR
(LED LCD MONITOR)
22BK55WV
24BK55WV
Please read this manual carefully before operating
your set and retain it for future reference.
IPS LED(LED LCD) MONITOR MODEL
ENGLISH
2
ENG
ENGLISH
CONTENTS
3LICENSE
4ASSEMBLING AND PREPAR-
ING
4 Unpacking
5 Parts and buttons
6 Setting up the Monitor set
6 - Attaching the Stand Base
6 - Detaching the stand base
7 - Detaching the stand body
7 - Using the cable holder
7 - Mounting on a table
8 - Adjusting the angle
9 - Adjusting the stand height
9 - Using the Kensington locking device
10 - Swivel stand
10 - Using the Pivot function
11 - Mounting on a wall
12 USING THE MONITOR SET
12 Connecting to a PC
12 - D-SUB connection
12 - DVI-D connection
13 - HDMI connection
14 - Peripheral device connection
15 CUSTOMIZING SETTINGS
16 Customizing Settings
16 - Menu Settings
19 TROUBLESHOOTING
21 SPECIFICATIONS
21 22BK55WV
22 24BK55WV
23 Preset Modes (Resolution)
24 Indicator
3
ENG
ENGLISH
LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo
are trademarks or registered trademarks of HDMI Licensing LLC in the United States
and other countries.
The following content is only applied to the monitor which is sold in Europe market and which needs to meet the ErP
Directive:
* This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no adjustment to
display.
* To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.
4
ENG
ENGLISH
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
yDo not use any unapproved accessories to ensure the safety and product life span.
yAny damages or injuries by using unapproved accessories are not covered by the warranty.
yThe accessories supplied with your product may vary depending on the model.
yProduct specifications or contents in this manual may be changed without prior notice due to upgrade
of product functions.
CAUTION
NOTE
Stand Base
CD(Owner's Manual) /
Card
D-SUB Cable
(This cable is not included in all
countries.)
HDMI Cable
( This cable is not included
in all countries. )
( Depending on the country )
Power Cord
DVI-D Cable
(This cable is not included in all
countries.)
One Screw Cable Holder
Audio Cable
5
ENG
ENGLISH
Parts and buttons
(Power Button)
Power Indicator
yLED On : Power is on
yLED Off: Power is off
Front Side Buttons
6
ENG
ENGLISH
Setting up the Monitor set
Attaching the Stand Base
1Place the Monitor set with the screen side
down on a flat and cushioned surface.
Stand Base
Stand Body
Stand Base
Stand Body
yTo protect the screen from scratches, cover
the surface with a soft cloth.
3Using a coin, turn the screw clockwise to se-
cure the stand base.
2Check the position (at the front and rear) of
the stand body, then mount the stand base on
the stand body as shown in the figure.
CAUTION
Stand Base
yIllustrations in this document represent typi-
cal procedures, so they may look different
from the actual product.
yDo not carry the monitor upside down by just
holding the stand base. This may cause the
monitor to fall off the stand and could result
in personal injury.
yWhen lifting or moving the monitor, do not
touch the monitor screen. The force applied
to the monitor screen may cause damage to
it.
yDo not apply foreign substances (oils, lubri-
cants, etc.) to the screw parts when assem-
bling the product. (Doing so may damage the
product.)
yApplying excessive force when tightening
screws may cause damage to the monitor.
Damage caused in this way will not be cov-
ered by the product warranty.
Detaching the stand base
1Place the monitor's screen face down.
To protect the screen from scratches, cover the
surface with a soft cloth.
2Using a coin, turn the screw in the stand base
counterclockwise. Detach the stand base from
the stand body.
CAUTION
7
ENG
ENGLISH
Mounting on a table
1Lift the monitor and place it on the table in an
upright position.
Install at least 100 mm away from the wall to
ensure sufficient ventilation.
100 mm
100 mm
100 mm
100 mm
Detaching the stand body
1Place the monitor's screen face down. To
protect the screen from scratches, cover the
surface with a soft cloth.
2Using a screwdriver, remove the four screws
and detach the stand from the monitor.
Using the cable holder
Fix the Knob (Cable holder) to the
Hole(Hingebody).
1
2
3
Use one screw to fix the Cable Holder and
monitor set.
Close the Cable holder.
NOTE
yThe holes are used for wall mount bracket.
yVaries depending upon your country or
model.
8
ENG
ENGLISH
2
3Press the (Power) button on the front of the
monitor to turn on the monitor.
yUnplug the power cord prior to moving or
installing the monitor. There is risk of electric
shock.
CAUTION
1
2
Connect the Power cord to the monitor, then
plug the power cord into the wall outlet.
(Before connect please check the “ON/OFF”
knob in “O” state).
Press the “ON/OFF” knob in “ ” state
(Open the power).
Adjusting the angle
1Place the monitor mounted on the stand base
in an upright position.
yTo avoid injury to the fingers when adjusting
the screen, do not hold the lower part of the
monitor's frame as illustrated below.
yBe careful not to touch or press the screen
area when adjusting the angle of the monitor.
WARNING
2Adjust the angle of the screen. The angle of
the screen can be adjusted up to 5° forwards
and 35° backwards for a comfortable viewing
experience.
Front SideRear Side
9
ENG
ENGLISH
Using the Kensington locking
device
The connector for the Kensington lock is located
on the rear of the monitor.
For more information on installation and usage,
refer to the Kensington lock user manual or visit
the website at http://www.kensington.com.
Connect the monitor to the table with the Kensing-
ton lock cable.
yUsing the Kensington lock is optional. The
accessories can be purchased at your local
electronics store.
NOTE
yOnce the pin is removed, it is not necessary
to re-insert it to adjust the height.
yDo not put your finger be-
tween the screen and the
base (chassis) when adjust-
ing the screen's height.
CAUTION
WARNING
3The height can be adjusted up to 130 mm.
130.0mm
Adjusting the stand height
1Place the monitor mounted on the stand base
in an upright position.
2Remove the tape attached at the bottom rear
of the stand body, then pull out the locking
pin.
Tape
Locking Pin
Stand Body
10
ENG
ENGLISH
Swivel stand
yImage shown may differ from your Monitor
set.
1Swivel 355 degrees and adjust the angle of the
Monitor set to suit your view.
1Lift the monitor to its highest height to utilize
the Pivot function.
Using the Pivot function
The pivot function allows you to rotate the screen
90 degrees clockwise.
2Landscape & Portrait : You can rotate the panel
90° clockwise. Please be cautious and avoid
contact between the monitor head and the
Stand Base when rotating the screen to access
the Pivot function. If the monitor head touches
the Stand Base, then the Stand Base could
crack.
Head
section
Stand
section
3Be careful with the cables when rotating the
screen.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere LG Monitor Handbücher
LG
LG M1962D Bedienungsanleitung
LG
LG UltraGear 27GR95QE Bedienungsanleitung
LG
LG 32ML600M Bedienungsanleitung
LG
LG 50PG20 Series Installationsanleitung
LG
LG 42PM1M-UC Bedienungsanleitung
LG
LG 505EM.ALLABL Bedienungsanleitung
LG
LG 42VX30ms Bedienungsanleitung
LG
LG 29WQ500 Bedienungsanleitung
LG
LG UltraGear 45GR95QEB Bedienungsanleitung
LG
LG UltraGear 32GN550-B Bedienungsanleitung
LG
LG E1910S Bedienungsanleitung
LG
LG FLATRON L1910P Bedienungsanleitung
LG
LG E2350V Bedienungsanleitung
LG
LG 49BL95C-WE Bedienungsanleitung
LG
LG Flatron L1718S-BN Kurzanleitung
LG
LG LB580N Bedienungsanleitung
LG
LG 22MP55D Bedienungsanleitung
LG
LG MZ-42PM10 Bedienungsanleitung
LG
LG 24MR400-BA Bedienungsanleitung
LG
LG 27UN83A Bedienungsanleitung
