LG 22BK55WY Bedienungsanleitung
www.lg.com
OWNER’S MANUAL
LED LCD MONITOR
22BK55WD
24BK55WD
22BK55WY
24BK55WY
Please read this manual carefully before operating
your set and retain it for future reference.
LED LCD MONITOR MODEL
ENGLISH
2
ENG
ENGLISH
TABLE OF CONTENTS
CONTENTS
3ASSEMBLING AND PREPAR-
ING
3 Unpacking
4 Parts and buttons
6 Setting up the Monitor set
6 - Attaching the Stand Base
6 - Detaching the stand base
7 - Detaching the stand body
7 - Using the cable holder
7 - Mounting on a table
8 - Adjusting the angle
9 - Adjusting the stand height
9 - Using the Kensington locking device
10 - Swivel stand
10 - Using the Pivot function
11 - Mounting on a wall
12 USING THE MONITOR SET
12 Connecting to a PC
12 - D-SUB connection
12 - DVI-D connection
14 - Peripheral device connection
15 CUSTOMIZING SETTINGS
16 Customizing Settings
16 - Menu Settings
17 -Picture
18 -Color
19 -Display
19 -Audio
20 -Others
21 -READER Setting
22 -SMART ENERGY SAVING Setting
23 TROUBLESHOOTING
25 SPECIFICATIONS
25 22BK55WY
26 22BK55WD
27 24BK55WY
28 24BK55WD
29 Preset Modes (Resolution)
30 Indicator
31 PROPER POSTURE
31 Proper posture for using the Monitor set.
3
ENG
ENGLISH
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
yDo not use any unapproved accessories to ensure the safety and product life span.
yAny damages or injuries by using unapproved accessories are not covered by the warranty.
yThe accessories supplied with your product may vary depending on the model.
yProduct specifications or contents in this manual may be changed without prior notice due to upgrade
of product functions.
CAUTION
NOTE
Stand Base
CD(Owner's Manual) /
Card
D-SUB Cable
(This cable is not included in all
countries.)
DisplayPort Cable
(This cable is not included
in all countries.)
( Depending on the country ) ( Depending on the country )
Power Cord
DVI-D Cable
(This cable is not included in all
countries.)
One Screw Cable Holder
USB Cable
Audio Cable
22BK55WY 24BK55WY 22BK55WY 24BK55WY
6
ENG
ENGLISH
ASSEMBLING AND PREPARING
Setting up the Monitor set
Attaching the Stand Base
1Place the Monitor set with the screen side
down on a flat and cushioned surface.
Stand Base
Stand Body
Stand Base
Stand Body
yTo protect the screen from scratches, cover
the surface with a soft cloth.
3Using a coin, turn the screw clockwise to se-
cure the stand base.
2Check the position (at the front and rear) of
the stand body, then mount the stand base on
the stand body as shown in the figure.
CAUTION
Stand Base
yThe components appearing in the illustra-
tions may look different from the actual prod-
uct.
yDo not carry the monitor upside-down as this
may cause it to fall off its stand, resulting in
damage or injury.
yTo avoid damaging the screen when lifting
or moving the monitor, only hold the stand or
the plastic cover. This avoids putting unnec-
essary pressure on the screen.
yOnly remove the tape and the locking pin
when the monitor is mounted on the stand
base and is in an upright position. Otherwise,
the stand body may protrude, which may
lead to injury.
Detaching the stand base
1Place the monitor's screen face down.
To protect the screen from scratches, cover the
surface with a soft cloth.
2Using a coin, turn the screw in the stand base
counterclockwise. Detach the stand base from
the stand body.
CAUTION
7
ENG
ENGLISH
ASSEMBLING AND PREPARING
Mounting on a table
1Lift the monitor and place it on the table in an
upright position.
Install at least 100 mm away from the wall to
ensure sufficient ventilation.
100 mm
100 mm
100 mm
100 mm
Detaching the stand body
1Place the monitor's screen face down. To
protect the screen from scratches, cover the
surface with a soft cloth.
2Using a screwdriver, remove the four screws
and detach the stand from the monitor.
Using the cable holder
Fix the Knob (Cable holder) to the
Hole(Hingebody).
1
2
3
Use one screw to fix the Cable Holder and
monitor set.
Close the Cable holder.
NOTE
yThe holes are used for wall mount bracket.
yVaries depending upon your country or
model.
8
ENG
ENGLISH
ASSEMBLING AND PREPARING
2
3Press the (Power) button on the front of the
monitor to turn on the monitor.
yUnplug the power cord prior to moving or
installing the monitor. There is risk of electric
shock.
CAUTION
1
2
Connect the Power cord to the monitor, then
plug the power cord into the wall outlet.
(Before connect please check the “ON/OFF”
knob in “O” state).
Press the “ON/OFF” knob in “ ” state
(Open the power).
Adjusting the angle
1Place the monitor mounted on the stand base
in an upright position.
yTo avoid injury to the fingers when adjusting
the screen, do not hold the lower part of the
monitor's frame as illustrated below.
yBe careful not to touch or press the screen
area when adjusting the angle of the monitor.
WARNING
2Adjust the angle of the screen. The angle of
the screen can be adjusted up to 5° forwards
and 35° backwards for a comfortable viewing
experience.
Front SideRear Side
9
ENG
ENGLISH
ASSEMBLING AND PREPARING
Using the Kensington locking
device
The connector for the Kensington lock is located
on the rear of the monitor.
For more information on installation and usage,
refer to the Kensington lock user manual or visit
the website at http://www.kensington.com.
Connect the monitor to the table with the Kensing-
ton lock cable.
yUsing the Kensington lock is optional. The
accessories can be purchased at your local
electronics store.
NOTE
yOnce the pin is removed, it is not necessary
to re-insert it to adjust the height.
yDo not put your finger be-
tween the screen and the
base (chassis) when adjust-
ing the screen's height.
CAUTION
WARNING
3The height can be adjusted up to 130 mm.
130.0mm
Adjusting the stand height
1Place the monitor mounted on the stand base
in an upright position.
2Remove the tape attached at the bottom rear
of the stand body, then pull out the locking
pin.
Tape
Locking Pin
Stand Body
10
ENG
ENGLISH
ASSEMBLING AND PREPARING
Swivel stand
yImage shown may differ from your Monitor
set.
1Swivel 355 degrees and adjust the angle of the
Monitor set to suit your view.
1Lift the monitor to its highest height to utilize
the Pivot function.
Using the Pivot function
The pivot function allows you to rotate the screen
90 degrees clockwise.
2Landscape & Portrait : You can rotate the panel
90° clockwise. Please be cautious and avoid
contact between the monitor head and the
Stand Base when rotating the screen to access
the Pivot function. If the monitor head touches
the Stand Base, then the Stand Base could
crack.
Head
section
Stand
section
3Be careful with the cables when rotating the
screen.
Dieses Handbuch passt für folgende Modelle
5
Inhaltsverzeichnis
Andere LG Monitor Handbücher
LG
LG 27GR93U-B.AUS Bedienungsanleitung
LG
LG MT-50PZ40, MT-50PZ41, MT-50PZ4 Bedienungsanleitung
LG
LG 55WV70 Bedienungsanleitung
LG
LG M4715C-BAP Bedienungsanleitung
LG
LG 38WN95C-W Bedienungsanleitung
LG
LG 49WL95C-W Bedienungsanleitung
LG
LG W1752T Bedienungsanleitung
LG
LG M208WV Bedienungsanleitung
LG
LG 29UC97C-B.AUS Bedienungsanleitung
LG
LG 32LX340H Kurzanleitung
LG
LG StudioWorks 900B Bedienungsanleitung
LG
LG 27UL550P Bedienungsanleitung
LG
LG 29UC97C Leitfaden
LG
LG 43BN70UP Bedienungsanleitung
LG
LG M2380DB-PZ Bedienungsanleitung
LG
LG E2350V Bedienungsanleitung
LG
LG UltraGear 24GL600F-B.BFB Bedienungsanleitung
LG
LG 566LE Bedienungsanleitung
LG
LG Flatron W1943S-V Series Bedienungsanleitung
LG
LG 32QN600-B.ACC Bedienungsanleitung
