LG 27BN55UP-B Bedienungsanleitung

* LG LED Monitor applies LCD screen with LED backlights.

Please read this manual carefully before operating your set and

retain it for future reference.

27BN55U

27BN55UP

OWNER’S MANUAL

LED LCD MONITOR

(LED Monitor*)

www.lg.com

ENGLISH

LICENSE

Each model has different licenses.Visit www.lg.com for more information on the license.

The terms HDMI, HDMI High-Definition Multimedia Interface, and

the HDMI Logo are trademarks or registered trademarks of HDMI

Licensing Administrator, Inc.

VESA, VESA logo, DisplayPort compliance logo and DisplayPort

compliance logo for dual-mode source devices are all registered

trademarks of the Video Electronics Standards Association.

TABLE OF CONTENTS

LICENSE ...................................................... 2

ASSEMBLING AND PREPARING .................. 3

USING THE MONITOR.................................. 9

USER SETTINGS ........................................ 11

TROUBLESHOOTING ................................. 22

PRODUCT SPECIFICATION......................... 24

ENGLISH

ASSEMBLING AND PREPARING

CAUTION

•Always use genuine LG components to ensure safety and product performance.

•The product warranty will not cover damage or injury caused by the use of unauthorized components.

•It is recommended that use the supplied components.

•If you use generic cables not certified by LG, the screen may not display or there may be image noises.

•Illustrations in this document represent typical procedures, so they may look different from the actual product.

•Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing

so may damage the product.)

•Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this

way will not be covered by the product warranty.

•Do not carry the monitor upside down by just holding the base.This may cause the monitor to fall off the stand

and could result in personal injury.

•When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen

may cause damage to it.

NOTE

•The components may look different from those illustrated here.

•Without prior notice, all product information and specifications contained in this manual are subject to change

to improve the performance of the product.

•To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer

from which you purchased the product.

•The power cord provided may differ depending upon the region.

Supported Drivers and Software

You can download and install the latest version from the LGE website (www.lg.com).

Drivers and Software Installation Priority

Monitor Driver Recommended

OnScreen Control Recommended

Dual Controller Optional

ENGLISH

Product and Button Description

Joystick Button

How to Use the Joystick Button

You can easily control the functions of the monitor by pressing the joystick button or moving it left/right/up/

down with your finger.

Basic Functions

Power on Press the joystick button once with your finger

to turn on the monitor.

Power off

Press and hold the joystick button once more

than 5 seconds with your finger to turn off the

monitor.

/ Volume control You can control the volume by moving the

joystick button left/right.

NOTE

•The joystick button is located at the bottom of the monitor.

Moving and Lifting the Monitor

When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or

damaged and to ensure safe transportation, regardless of its shape or size.

•Place the monitor in the original box or packing material before attempting to move it.

•Before moving or lifting the monitor, disconnect the power cord and all other cables.

•Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.

•When holding the monitor, the screen should face away from you to prevent it from being scratched.

•When transporting the monitor, do not expose the monitor to shock or excessive vibration.

•When moving the monitor, keep it upright and never turn the monitor on its side or tilt it sideways.

CAUTION

•Avoid touching the monitor screen as much as possible.

-This may result in damage to the screen or some of the pixels used to create images.

•If you use the monitor panel without the stand base, its joystick button may cause the monitor to become

unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick

button to malfunction.

ENGLISH

Installing on a Table

•Lift the monitor and place it on the table in an upright position. Place the monitor at least 100mm away from

the wall to ensure sufficient ventilation.

100 mm

CAUTION

•Unplug the power cord before moving or installing the monitor. There is risk of electric shock.

•Make sure to use the power cord that is provided in the product package and connect it to a grounded power

outlet.

•If you need another power cord, please contact your local dealer or the nearest retail store.

Adjusting the Stand Height

1 Place the monitor mounted on the stand base in an upright position.

2 Handle the monitor with both hands for safety.

Max. 130.0 mm

WARNING

•When adjusting the screen height, do not place your hand on the stand body to avoid injury to your fingers.

Adjusting the Angle

1 Place the monitor mounted on the stand base in an upright position.

2 Adjust the angle of the screen.

The angle of the screen can be adjusted forward or backward from -5° to 35° for a comfortable viewing

experience.

WARNING

•To avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor’s frame as

illustrated below.

•Be careful not to touch or press the screen area when adjusting the angle of the monitor.

ENGLISH

Pivot Feature

The pivot feature allows the monitor to rotate 90° clockwise.

Head

Stand

WARNING

•To avoid scratching the stand base, make sure that when rotating the monitor using the pivot feature, the

stand does not make contact with the monitor.

1 Raise the monitor to the maximum height.

2 Adjust the angle of the monitor in the direction of the arrow as shown in the figure.

3 Rotate the monitor clockwise as shown in the figure.

4 Complete the installation by rotating the monitor 90° as shown below.

NOTE

•Auto Pivot feature of the display is not supported.

•The screen can be rotated easily using the screen pivot shortcut key provided with your Windows operating

system. Note that someWindows versions and some graphics card drivers may use different settings for the

screen pivot key or may not support the pivot key at all.

ENGLISH

NOTE

•The left or right side of the monitor head can be slightly rotated up or down (up to 3°). Adjust the horizontal

level of the monitor head.

Monitor head

Installing the Wall Mount Plate

This monitor meets the specifications for the wall mount plate or other compatible devices.

NOTE

•The wall mount plate is sold separately.

•For more information on installation, refer to the wall mount plate’s installation guide.

•Be careful not to apply too much force while mounting the wall mount plate as it may cause damage to the

screen.

•Remove the stand before installing the monitor on a wall mount by performing the stand attachment in

reverse.

Using the Kensington Lock

The connector for the Kensington security system is located at the back of the monitor.

For more information on installation and usage, refer to the Kensington lock owner’s manual or visit the website

at http://www.kensington.com.

Connect the monitor to a table using the Kensington security system cable.

NOTE

•The Kensington security system is optional. You can obtain optional accessories from most electronics stores.

ENGLISH

Installing on the Wall

Install the monitor at least 100mm away from the wall and leave about 100mm of space at each side of the

monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail

store. Alternatively, please refer to the manual for how to install and set up a tilting wall mounting bracket.

100 mm

To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor.

Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.

Wall Mount (mm) 100 x 100

Standard screw M4 x L10

Number of screws 4

Wall Mount Plate (Optional) LSW 149

NOTE

•A non-VESA standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable

for any accidents relating to the use of non-standard screws.

•The wall mount kit includes the installation guide and all necessary parts.

•The wall mounting bracket is optional.You can obtain optional accessories from your local dealer.

•The length of the screw may differ for each wall mounting bracket. If you use screws longer than the standard

length, it may damage the inside of the product.

•For more information, please refer to the user manual for the wall mounting bracket.

CAUTION

•Unplug the power cord before moving or installing the monitor to avoid electric shock.

•Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead

to injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel.

•Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this

way will not be covered by the product warranty.

•Use the wall mounting bracket and screws that conform toVESA standards. Damage caused by the use or

misuse of inappropriate components will not be covered by the product warranty.

•When measured from the back of the monitor, the length of each installed screw must be 8 mm or less.

Wall Mount Plate

Back of the Monitor

Standard screw:

M4 x L10

Wall Mount Plate

Back of the Monitor

Max. 8 mm

ENGLISH

USING THE MONITOR

•Illustrations in this manual may differ from the actual product.

Press the joystick button, go to Settings Input, and then select the input option.

CAUTION

•Do not press the screen for a prolonged time.This may cause image distortion.

•Do not display a still image on the screen for a prolonged time. This may cause image retention. Use a PC

screensaver if possible.

•When connecting the power cord to the outlet, use a grounded (3-hole) power strip or a grounded power

outlet.

•The monitor may flicker when turned on in an area where the temperature is low.This is normal.

•Sometimes red, green, or blue spots may appear on the screen.This is normal.

Connecting to a PC

•This monitor supports the *Plug and Play feature.

* Plug and Play: A feature that allows you to add a device to your computer without having to reconfigure

anything or install any manual drivers.

HDMI Connection

Transmits digital video and audio signals from your PC to the monitor.

CAUTION

•Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.

•Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not

display or a connection error may occur.

•Recommended HDMI cable types

-High-Speed HDMI®/TM cable

-High-Speed HDMI®/TM cable with Ethernet

DisplayPort Connection

Transmits digital video and audio signals from your PC to the monitor.

NOTE

•There may be no video or audio output depending on the DP (DisplayPort) version of the PC.

•If you are using a Mini DisplayPort output graphics card, use a Mini DP to DP (Mini DisplayPort to DisplayPort)

cable or gender that supports DisplayPort1.2 or 1.4. (Sold separately)

ENGLISH

Connecting AV Devices

HDMI Connection

HDMI transmits digital video and audio signals from your AV device to the monitor.

NOTE

•Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.

•Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not

display or a connection error may occur.

•Recommended HDMI cable types

-High-Speed HDMI®/TM cable

-High-Speed HDMI®/TM cable with Ethernet

Connecting Peripherals

Headphones Connection

Connect peripherals to the monitor via the headphones port.

NOTE

•Peripheral devices are sold separately.

•Depending on the audio settings of the PC and external device, headphones and speaker functions may be

limited.

•If you use angled earphones, it may cause a problem with connecting another external device to the monitor.

Therefore, it is recommended to use straight earphones.

Angled Straight

(Recommend)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere LG Monitor Handbücher

LG UltraWide 34BK95UW Bedienungsanleitung

LG Flatron L1718S-BN Bedienungsanleitung

LG Flatron LB700G-GD Bedienungsanleitung

LG UltraGear 34GP63AP Bedienungsanleitung

LG L1717SBN - - 17" LCD Monitor Bedienungsanleitung

LG FLATRON L1520BM-AL*R Bedienungsanleitung

LG L226WTQS Bedienungsanleitung

LG 34WP65C Bedienungsanleitung

LG UltraGear 27GN60R Bedienungsanleitung

LG 25BL56WY-B Bedienungsanleitung

LG E1910S Bedienungsanleitung

LG 34BL650-B.AUB Bedienungsanleitung

LG FLATRON LCD 563LE (LB563T-GR) Bedienungsanleitung

LG 24CK550Z-BP.AEU Bedienungsanleitung

LG 22MN430M Bedienungsanleitung

LG Flatron W1953T Bedienungsanleitung

LG 19M35A Bedienungsanleitung

LG 27BL650C Bedienungsanleitung

LG 34WK95U Bedienungsanleitung

LG 55WV70 Bedienungsanleitung

LG 29UM59 Bedienungsanleitung

LG MP-4 Bedienungsanleitung

LG L1970HQ Bedienungsanleitung

LG M4224N-B32 Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung

Sceptre

Sceptre D40 Bedienungsanleitung