LG 55WV70MS Kurzanleitung
www.lg.com
Easy Setup Guide
MONITOR SIGNAGE
55WV70MS
Please read this manual carefully before operating your set and retain
it for future reference.
MONITOR SIGNAGE MODEL
ENG
ENGLISH
P/NO : MFL67476901 (1204-REV00)
Printed in Korea
2
ENG
ENGLISH
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
Accessories
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
P
A
G
E
INPUT
ENERGY
SAVING
MARK
ARC
ON
OFF
. , !
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
1/a/A
- * #
WXYZ
CLEAR
MONITOR
PSM
AUTO
MUTE
BRIGHT
NESS
MENU
POWER
OK
S.MENU
ID
BACK TILE
ON OFF
EXIT
Remote control and Batteries
Power Cord DVI Cable
IR Receiver
M4 x 6L
Screw (4ea) M6
Screw (4ea) Ring Core
CD (Owner's Manual,
SuperSign Elite-w Program/
SuperSign Manual) /Card
RGB Cable
RS-232C Cable Tiling Guide
(2ea)
The accessories supplied with your product may vary depending on the model.
Product specifications or contents in this manual may be changed without prior notice due to upgrade
of product functions.
How to Use a Ring Core
A ring core reduces electromagnetic waves emitted from the IR receiver.
Loop the cable through the core once, before using it as illustrated.
Do not use any pirated items to ensure the safety and product life span.
Any damages or injuries by using pirated items are not covered by the warranty.
CAUTION
NOTE
Ring Core
3
ENG
ENGLISH
ASSEMBLING AND PREPARING
Dimensions (Width x Height x Depth) / Weight
To view the User’s guide
“Insert CD ROM” in Computer
CD-ROM will open automatically.(for Window only)
My computer ➙Digital_LG(CD-ROM) ➙Index.htm Open
My computer ➙Digital_LG(CD-ROM) ➙Manual folder ➙User's Guide Open
1215.2 mm x 686 mm x 99 mm / 33.4 Kg
H
WD
4
ENG
ENGLISH
Safety Precautions
Do not Clamp
Do not drop from clamping.
2 Persons needed for transport
Load with care.
PRECAUTION IN MOVEMENT
Adhere to the warning signs printed on the Box.
Do not drop from stacking.
4 Persons needed for transport
Do not transport horizontally.
Do not drop from carrying.
This way up/ Fragile/ Keep away from rain/ Stacking limit 4.
Don’t tumble the Set box sideward down.
Don't lie on or lean on the Set box.
5
ENG
ENGLISH
Safety Precautions
Move the Set as a team of 2 persons. When you move
the bare Set, please use one hand on grabbing the
handle and the other support under the Set.
PRECAUTION IN HANDLING Precaution
10 cm
10 cm
10 cm10 cm
20 cm
1Remove the L-bracket on the corner of the Set be-
fore installation. When moving the Set, re-assemble
the L-bracket.
2Be careful not to collide the sets with the floor or with
each other. Install in the space with enough airflow.
6
ENG
ENGLISH
Safety Precautions
Causes & Phenomena of the
Line Defect
The line defect would occur on your Set if you strike on
the edge of the Set.
LOG (LINE ON GLASS) DEFECT
COF (CHIP ON FILM) DEFECT
COF Cable
Source PCB
COF Cable
Source PCB
1 Shock on Module Top Side b Top COF Crack b
Vertical Line Defect
2Shock on Module Left Side b Left COF Crack b Hori-
zontal Line Defect
1Shock on Module Left/Top Corner b Left/Top LOG
Crack b Horizontal Line Defect
7
ENG
ENGLISH
Installing the Product
Installing the Product
1 Cut Packing Strap of the Box.
3Open the Box and remove the top packing.
5Open the Poly Bag.
4Remove the Upper Box.
6Undress the Poly Bag.
2Cut Tape on the Box.
8
ENG
ENGLISH
Installing the Product
7Lift up the Set using the SIDE/BACK Handle.
9With one hand under the set and the other hand grabbing the set, move the set.
10 Lay the back of the Set down on the table.
8Remove Bottom packing when lifting up the Set.
9
ENG
ENGLISH
Installing the Product
11 Use the cushion or Pad when you lay the face of the Set downward.
12 Connect IR receiver to use remocon. And then, connect power code.
10
ENG
ENGLISH
Tiling Displays
How to Mount the Set
Tiling Displays
*Example of 2 x 2 tiling
Screws for fixing the
VESA wall mount
<Rear view of the set with the wall mount plate>
How to Join Sets
The load applied to each set should be
supported by the wall mount plate or the wall
using a VESA wall mount (600 x 400).
The load applied to each set should be
supported by the wall mount plate using a VESA
wall mount. (Each set must be firmly mounted to
the wall mount plate or the wall.)
You may mount the set without using the tiling
guide; this does not affect the performance of
the device.
NOTE
Set 4 joined to the rest of the sets
(2 x 2 tiling)
1Join other sets using screws for fixing the VESA wall
mount in the same way as above.
2After joining the sets, use the tiling guide to adjust the
gap between the sets.
3Now the 2 x 2 tiling is complete.
You can tile in various combinations, such as
3 x 3.
When you connect Monitor sets for multivision,
you may find that the screen color is not the same
across all the Monitor sets. If you want to adjust
the screen color manually, please refer to the
Installation Manual.
When you install multiple Monitor sets onto a wall,
attach the IR Receiver to all the sets, or use an
RS-232C cable to connect them and then attach
the IR Receiver to the first set.
CAUTION
Andere Handbücher für 55WV70MS
2
Inhaltsverzeichnis
Sprachen:
Andere LG Monitor Handbücher
LG
LG 32UL950-W.AAU Bedienungsanleitung
LG
LG L2000C - - 20.1" LCD Monitor Kurzanleitung
LG
LG Flatron M228WD Bedienungsanleitung
LG
LG 882LE Bedienungsanleitung
LG
LG 440Si Bedienungsanleitung
LG
LG E2750VR-SN Bedienungsanleitung
LG
LG FLATRON L3700A Bedienungsanleitung
LG
LG Flatron M198WA Bedienungsanleitung
LG
LG 22MB35PH Bedienungsanleitung
LG
LG T750PH plus Bedienungsanleitung
LG
LG 27UK650 Bedienungsanleitung
LG
LG LCD 782LS Bedienungsanleitung
LG
LG 17MB15P Bedienungsanleitung
LG
LG W2346T-BF Bedienungsanleitung
LG
LG L1951S Bedienungsanleitung
LG
LG MW 71PY10 Bedienungsanleitung
LG
LG 17MB15T Bedienungsanleitung
LG
LG E2040T-PN Kurzanleitung
LG
LG RP-42PX20 Bedienungsanleitung
LG
LG W1946S Bedienungsanleitung
