LG Flatron 776FM Bedienungsanleitung

Introduction

Thank you for purchasing a high resolution monitor. It will give you high

resolution performance and convenient reliable operation in a variety of

video operating modes.

Features

The monitor is a 17 inches (16.0 inches viewable ) intelligent, microprocessor

based monitor compatible with most analog RGB (Red, Green, Blue) display

standards, including IBM PC®, PS/2®, Apple®, Macintosh®, Centris®, Quadra®, and

Macintosh II family.

The monitor provides crisp text and vivid color graphics with VGA, SVGA, XGA,

and VESA Ergonomic modes (non-interlaced), and most Macintosh compatible

color video cards when used with the appropriate adaptor. The monitor's wide

compatibility makes it possible to upgrade video cards or software without

purchasing a new monitor.

Digitally controlled auto-scanning is done with the micro-processor for horizontal

scan frequencies between 30 and 70kHz, and vertical scan frequencies

between 50-160Hz.

This monitor is capable of producing a maximum horizontal resolution of 1280

dots and a maximum vertical resolution of 1024 lines.

The microprocessor-based digital controls allow you to adjust conveniently a

variety of image controls by using the OSD (On Screen Display).

On Screen Display (OSD) adjustments in 11 languages:

English, German, French, Spanish, Italian, Swedish, Finnish, Portuguese,

Korean, Chinese and Russian.

Plug and play capability if supported by your system.

This monitor has DDC 2B function.*

Compliant with the following regulated specifications :*

EPA ENERGY STAR

Swedish MPRII

Swedish TCO’99

ENGLISH

For detailed information, please refer to the Reference Guide provided .

Connecting the Monitor

Turn off the equipment and all attached options.

Carefully set the monitor face-down with the underside facing you.

Installation

1. Align the hooks on the tilt/swivel stand with the matching slots in the base of

the monitor.

2. Insert the hooks into slots.

3. Slide the tilt/swivel stand toward the front of the monitor until the latches click

into the locked position.

Slots

Latch

Hooks

Connecting the Monitor

On the back of the monitor are two plug-in connections; one for the AC

power cord, and the other for the signal cable from the video card.

Power off both the monitor and PC.

Connect the 15 pin VGA connector of the supplied signal cable to the output

VGA video connector on the PC and the matching input connector on the rear

of the monitor. The connectors will mate only one way. If you cannot attach

the cable easily, turn the connector upside down and try again. When mated,

tighten the thumbscrews to secure the connection.

Locate the appropriate MAC to VGA adapter block at your local computer

store. This adapter changes the high density 3 row 15 pin VGA connector to

the correct 15 pin 2 row connection to mate with your MAC. Attach the other

end of the signal cable to the side of the adapter block with 3 rows.

Connect the attached adapter block/signal cable to the video output on your

MAC.

One end of the AC power cord is connected into the AC power connector on

the back of the monitor. The other end is plugged into a properly grounded

three-prong AC outlet.

Power on the PC, then the monitor.

If you see the SELF DIAGNOSTICS message, check the signal cable and

connectors.

After using the system, power off the monitor, then the PC.

MIC

OUTAUD

Power Cord

Signal Cable

D-15P

Audio In

Mic Out

IBM PC MACINTOSH

D-15P

Mac Adapter

*NOTE : For Apple Macintosh use, a

separate plug adapter is needed to

change the 15 pin high density (3 row)

D-sub VGA connector on the supplied

cable to a 15 pin 2 row connector.

Location and Function of Controls

Rear View

Front View

MIC

OUTAUD

ID Label

Audio In

Mic Out

Front Panel Controls

Left Side Jacks

D-Sub Signal Cable

AC Power Socket

Control Panel Function

Front Panel Controls

OSD SET

Button Use these buttons to choose or adjust items in the

on screen display.

OSD Button Use this button to enter or exit the on screen

display.

To adjust sound menu.

Used to select mute on (means sound off) and

mute off (means sound on).

OSD

SET

Sound Menu

Sound Mute

Built-in Microphone.Built-in Microphone

The power indicator light is shown in the power

button. This Indicator lights up green when the

monitor operates normally. If the monitor is in DPM

(Energy Saving) mode (stand-by/suspend/power

off), this indicator color changes to amber.

Power (DPMS)

Indicator

Use this button to turn the monitor on or off.Power Button

Use this button to enter a selection in the on

screen display.

SET Button

Control Function

Sound Mute

Sound Menu Button

OSD Button

Built-in Microphone

Power ButtonSET Button

Power (DPMS) Indicator

• Brightness and Contrast can be adjusted directly without

entering the On Screen Display (OSD) system. Press the

buttons to display the menu and then the

buttons to adjust the settings. To save all changes, press the

OSD button. The Brightness and Contrast functions are also

available in the On Screen Display (OSD) menu.

100

Control Panel Function

Left Side Jacks

Rear Panel Jacks

Headphone Jack Headphone Jack that automatically mutes

the speaker volume when headphone is

attached.

Microphone Jack An external microphone can be used

instead of the built-in microphone.

MIC

OUT AUD

Mic. Out Connects microphone sound to PC via

cable.

Audio In Connects speaker sound to PC via cable

attachment.

Microphone Operation

On the left side there is a MIC (Microphone) jack. By plugging a microphone in

here, it may reduce the long length of cable needed to reach the PC's sound card.

In order to use this MIC jack, you need to use a cable (supplied) to plug into the

rear of the monitor (MIC OUT) and into the MIC input jack of your sound card (if

available).

Audio Features

A major feature of this monitor is its built-in audio system. This conveniently

integrates a stereo audio amplifier and speakers without taking up any more

space. Because the monitor is designed like this, you can easily upgrade to audio

capable multimedia applications by attaching your PC with sound card to the back

of this monitor. It will result in significantly less cabling and space requirements.

On Screen Display (OSD) Control Adjustment

Making adjustments to the image size, position and operating parameters of

the monitor are quick and easy with the On Screen Display Control system.

A quick example is given below to familiarize you with the use of the controls.

Following section is an outline of the available adjustments and selections you

can make using the OSD.

To make adjustments in the On Screen Display, follow these steps:

Press the OSD Button, then the main menu of the OSD appears.

To access a control, use the or Buttons. When the icon you want

becomes highlighted, press the SET Button.

Use the Buttons to adjust the item to the desired level.

Accept the changes by pressing the SET Button.

Exit the OSD by pressing the OSD Button.

NOTE

Allow the monitor to stabilize for at least 30 minutes before making image adjustment.

SET

OSD

SET

On Screen Display(OSD) Selection and Adjustment

SHAPE

Side Pincushion

To correct the bowing in and out of the image.

Side pincushion balance

To correct the balance of both sides bowling.

Trapezoid

To correct geometric distortion.

Parallelogram

This control adjusts for a skewing of the

screen image.

Corner Bottom

To correct the irregular distortion of the

displayed image.

Tilt

To correct image rotation.

Corner Top

To correct the irregular distortion of the

displayed image.

You were introduced to the procedure of selection and adjusting an item

using the OSD system. Listed below are the icons, icon names, and icon

descriptions of the items that are shown on the Menu.

OSD Adjust Description

BRIGHTNESS CONTRAST

100

POSITION

Brightness

Used to adjust the brightness of the screen.

Contrast

Adjust the display to the contrast desired.

Vertical Position

To move image up and down.

Horizontal Position

To move picture image left and right.

SIZE

Vertical Size

To adjust image height.

Horizontal Size

To adjust image width.

On Screen Display(OSD) Selection and Adjustment

OSD Adjust Description

VIDEO LEVEL 0.7V

LANGUAGE ENGLISH

OSD POSITION

SETUP

This item is used to select the monitor's input

signal level. The normal level used for most

PC's is 0.7V. When the screen suddenly gets

brightened or blurry, please select 1.0V and

try again.

To choose the language in which the control

names are displayed.

To adjust position of the OSD window on the

screen.

VIDEO LEVEL

LANGUAGE

OSD POSITION

To manually demagnetize the screen which

may show some image or color incorrectly.

SPECIAL

DEGAUSS ON

RECALL ON

MOIRE H: 0/V: 0

PURITY 50

68.6kHz/85.0Hz

PRESET MODE

DEGAUSS

You can use this function when you want to go

back to the screen display of the time you

purchased the product after adjusting to modify it

in the Preset Mode.

When you are in the User mode, you can recall

only items.

After using Recall, adjust the screen display again

if necessary. If you want more information on the

Preset Mode, refer to A11 page.

RECALL

This item allows you to reduce the moire (Moire

is caused by interference Horizontal Scan Line

with the periodical dot screen). It is normally

OFF(H:0/V:0).

The moire adjustments may affect the focus of

the screen. The screen image may shake

slightly while the moire reduction function is on.

MOIRE

Use to adjust the overall purity of the image

if the color appears uneven.

PURITY

COLOR

PRESET

TEMP

RED

GREEN

BLUE

6500K 9300K

PRESET

TEMP

RED

GREEN

BLUE

6500K / 9300K

To appear the displays color temperature.

•6500K : Slightly reddish white.

•9300K : Slightly bluish white.

User easily color set without adjustment Red,

Green and Blue (R/G/B).

To set your own color levels.

A10

Sound Selection and Adjustment

You were introduced to the procedure of selection and adjusting an item

using the OSD system. Listed below are the icons, icon names, and icon

descriptions of the items that are shown on the main Menu.

To make adjustments in the On Screen Display, follow these steps:

TREBLE

BASS

BALANCE

MICROPHONE

VOLUME

OSD Adjust Description

Raises or lowers audio level.

VOLUME

Raises or lowers treble level.TREBLE

Raises or lowers bass level.BASS

Changes balance of left/right speaker

level.

BALANCE

Enables or disables microphone

usage.

MICROPHONE

Inhaltsverzeichnis

Andere LG Monitor Handbücher

LG FB790GD Bedienungsanleitung

LG Flatron W1953S Bedienungsanleitung

LG Flatron L1753S Bedienungsanleitung

LG 27MP48HQ Bedienungsanleitung

LG UltraGear 27GP750-B.AMA Bedienungsanleitung

LG 34WL850 Bedienungsanleitung

LG 32GK650F Bedienungsanleitung

LG M1917SD Bedienungsanleitung

LG 19M47A Bedienungsanleitung

LG Flatron W1953T Bedienungsanleitung

LG 34GN850 Bedienungsanleitung

LG 34WN650-W.AUS Bedienungsanleitung

LG IPS237L-BN Bedienungsanleitung

LG 24BK55WP Bedienungsanleitung

LG MU-42PM12X Bedienungsanleitung

LG UltraGear 27GN850 Bedienungsanleitung

LG 34WQ60C Bedienungsanleitung

LG L196WTG Bedienungsanleitung

LG E2241V Bedienungsanleitung

LG Flatron 774FT Bedienungsanleitung

LG FLATRON M3201C Bedienungsanleitung

LG L1730S FH Bedienungsanleitung

LG EW224T-PN Bedienungsanleitung

LG 27BK550Y-W Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung

Sceptre

Sceptre D40 Bedienungsanleitung